TECH F21 Mini Printer User Guide

TECH F21 Mini Printer

Sònrachaidhean

• Teicneòlas clò-bhualaidh: Thermal printing (inkless)
• Seòrsa Clò-bhualaidh: Dubh & geal
• Seòrsa pàipear: Rollaichean pàipear teirmeach
• Leud pàipear: 57 mm
• Fuasgladh Clò-bhualaidh: 203 pso
• Luas clò-bhualaidh: Approx. 10–15 mm/s
• Ceangal: Bluetooth
• Innealan co-fhreagarrach: Android, iOS
• Aplacaidean le taic: Dedicated mobile printing app (varies by region)
• Seòrsa bataraidh: Bataraidh lithium ath-thagraidh
• Comas bataraidh: ~ 1000 mAh
• Modh cosgais: USB (Type-C or Micro-USB, model dependent)
• Vol Obrachaidhtage: 5V
• Stuth: Plastaig ABS
• Meud: Compact / portable
• Cuideam: Lightweight (approx. 150–200 g)
• Supported Printing: Text, images, labels, QR codes, barcodes

Fuasgladh thrioblaidean

Chan eil am clò-bhualadair a’ tionndadh air

• Dèan cinnteach gu bheil am bataraidh air a ghearradh.
• Feuch càball USB eadar-dhealaichte no stòr cumhachd.
• Press and hold the power button for 3–5 seconds.

Bluetooth nach eil a 'ceangal

• Turn Bluetooth OFF and ON again on your phone.
• Ensure the printer is not connected to another device.
• Reinstall or update the printer app.
• Keep the printer within 1–2 meters during pairing.

Blank or unclear printing

• Check that thermal paper is loaded correctly (print side facing out).
• Use compatible thermal paper only.
• Clean the print head gently.
• Ensure battery level is sufficient.

Paper not feeding properly

• Reinstall the paper roll correctly.
• Avoid overloading the paper compartment.
• Remove jammed paper carefully.

App nach eil a 'freagairt

• Dùin agus ath-fhosgladh an aplacaid.
• Check app permissions (Bluetooth, storage).
• Ath-thòisich am fòn agad.

Cùram is cumail suas

• Cleachd only recommended thermal paper to avoid print head damage.
• Keep the printer dry and away from heat or direct sunlight.
• Clean the print head periodically with a soft, dry cloth.
• Do not pull paper forcefully while printing.
• Charge the battery at least once every 2–3 months if not in use.
• Avoid dropping or applying pressure to the device.
• Store in a dust-free environment when not in use.

Loading PDF…

−+Fit width100%View FullscreenDownload PDFPrint PDF

×

Loading PDF…

Ro-ràdh Bathar

1.1 Liosta Pacaidh

O The quantity and specifications of the paper roll(s) are tailored to the package you’ve chosen.

1.2 Stiùireadh pàirtean clò-bhualadair

Toiseach tòiseachaidh

2.1 Luchdaich sìos an App
Lorg airson the “FaithTag” app on App Store@ or Google PlayTM for download and installation.

2.2 Stiùireadh Cleachdaiche
O Before starting printing, please ensure that the paper roll is properly loaded into the paper compartment. For detailed instructions, refer to the manual section “3. Replacing the Paper Roll.”

Gus an clò-bhualadair a thionndadh air, fada brùth am Putan Cumhachd airson trì diogan gus am bi an Comharra Light air.
Open the “FaithTag”App.
Thoir seachad ceadan.
Briog air [Ceangail] aig a’ mhullach.
Connection complete. Tap the homepage to view scriptures.
View scripture details, then tap print.
Access preview, then tap [Print].
Tha an clò-bhualadh crìochnaichte.
Thoir dheth an leubail air taobh a-muigh a’ phàipeir.
Thoir air falbh an cùl-taic.
Cuir an leubail air uachdar tioram, còmhnard.

Tha an eadar-aghaidh bathar-bog airson fiosrachadh a-mhàin. Feuch an toir thu sùil air an fhìor dhuilleag obrachaidh airson fiosrachadh ceart.

An àite an Rolla Pàipear

Thoir a-mach rolla pàipeir ùr-nodha.
O Please skip this step if the paper roll you have is not newly purchased and boxed.
Push the Cover Open Button towards the arrow to take out the Paper RollSpindle.
Tarraing gluasadach damper to remove the paper roll to be replaced.
Some paper rolls include tubes. Remove the paper tube after running out.
Cuir aon earrann den dealgan a-steach don rolla pàipeir a tha ri stàladh.
Ath-stàlaich an Movable Dampagus brùth e gu oir an rolla pàipeir.
Thoir air falbh an stiogair anti-loosening bhon rolla pàipeir.
Cuir an rolla pàipeir anns an Roinn Pàipear.
Tarraing an rolla pàipeir a-mach gus am bi e a’ dol seachad air an t-slot toraidh pàipeir, agus an uairsin dùin an còmhdach flip.

Stiùireadh sàbhailteachd

5.1 Stiùiridhean airson Gearradair Làimhe agus Ceann Clò-bhualaidh

Warning: Sharp edges on Manual Cutter! Do not touch the edges.
Warning: HOT component! Touching it when it is hot can cause burns to your fingers. Please wait for at least 30 minutes after turning off the power before touching it.

5.2 Stiùireadh cosgais
1. Please prepare your own power adapter (DC 5V/2A) with a Type-A port.
2. Insert the Type-C end (flat end) of the USB cable into F21’s Type-C Charger Port and plug the Type-A end (wide end) into the Type-A port of the power adapter.
3. After connecting and plugging in, please check the status of the printer indicator light. When the printer is charging, the indicator light will be flashing slowly with a “white light”.
4. Please charge for at least 20 minutes to meet quick usage; charging for 2-3 hours will complete the charging, or the following two states indicate full charge:when turned on, the indicator light stays “white”; when turned off, the light goes out.
5. As the printer may heat up during charging, avoid placing it on materials such as cotton or linen.
6. Once the battery is fully charged, please unplug the charger promptly.
O Avoid using the printer while charging.Using the printer while charging may lead to reduced charging speed, compromised print quality, and shortened battery life.

5.3 Glanadh agus cumail suas
O Please make sure the printer is turned off before performing any cleaning or maintenance.
Ma thachras tu ri duilgheadasan leithid loidhnichean bàn, clò neo-shoilleir, no caractaran a dhìth, is dòcha gur e salachar air a’ Cheann Clò-bhualaidh a tha ag adhbhrachadh seo. Lean na ceumannan seo:
If you have just finished printing, wait for at least 30 minutes for the Print

01 Head to cool down completely. Use a cotton swab dipped in alcohol or a print head cleaning pen (purchased
02 separately) to gently wipe the surface of the Print Head about 5 times to remove any dust and stains. Wait 5-10 minutes for the alcohol to evaporate completely. Thus, the cleaning
03 is done, and you can continue using the printer.

Fiosrachadh don neach-cleachdaidh

6.1 RABHADH FCC
Tha an inneal seo a 'gèilleadh ri Pàirt 15 de Riaghailtean FCC.

Operation is subject to the ollowing two conditions:

(1) is dòcha nach bi an inneal seo ag adhbhrachadh bacadh cronail, agus
(2) feumaidh an inneal seo gabhail ri bacadh sam bith a gheibhear, a’ toirt a-steach bacadh a dh’ fhaodadh obrachadh neo-mhiannach adhbhrachadh.

Dh’ fhaodadh atharrachaidhean no atharrachaidhean sam bith nach deach aontachadh gu sònraichte leis a’ phàrtaidh le uallach airson gèilleadh ùghdarras an neach-cleachdaidh airson an uidheamachd obrachadh a chuir às.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely tocause harmful interference in which case the user will be required to correct the interference at his own expense.

Chaidh an inneal a mheasadh gus coinneachadh ri aithris nochdaidh RF coitcheann.
Faodar an inneal a chleachdadh ann an staid nochdaidh so-ghiùlain gun chuingealachadh.

6.2 BRATH AIR A CHUR A-STEACH (Canada)
- Sasannach:
This device contains licence-exempt that comply with Innovation, Science and Economic Development Canada’ s licence-exempt RSS(s).

Tha gnìomhachd an urra ris an dà chùmhnant a leanas:

(1) Is dòcha nach bi an inneal seo ag adhbhrachadh bacadh.
(2) Feumaidh an inneal seo gabhail ri bacadh sam bith, a’ toirt a-steach bacadh a dh’ fhaodadh obrachadh neo-mhiannach an inneil adhbhrachadh.

Aithris nochdaidh IC RF:
Chaidh an inneal a mheasadh gus coinneachadh ri riatanas nochdaidh IC RF coitcheann. Faodar an inneal a chleachdadh ann an staid nochdaidh so-ghiùlain gun chuingealachadh.

WARNING Please pay attention to electrical safety. Do not disassemble, crush or puncture the battery. This product is not a toy.

Notaichean Sònraichte
Tha a’ chompanaidh a’ gabhail làn uallach airson ath-sgrùdadh agus mìneachadh an leabhair-làimhe seo, a’ dèanamh dìcheall as motha gus dèanamh cinnteach gu bheil e ceart.
Nevertheless, please note that any technical improvements to the product may not be separately notified, and that the images of the product, accessories, software interfaces, etc. in this manual serve solely as illustrations and references. Due to product updates and upgrades, theactual product may vary slightly from the images. Please refer to the physical product for accurate representations.