Leabhar-làimhe Stiùiridh Modúl Eadar-aghaidh seca 545-452

Modúl Eadar-aghaidh seca 545-452

Fiosrachadh toraidh

Sònrachaidhean

• Modail: sec a mBCA Alpha (545) seca TRU Alpha (452)
• Feart: Rèiteachadh W-LAN
• Riatanas Tionndadh Bathar-bog: 1.9.0 air adhart
• Lìonraidhean WiFi le taic: 2.4 GHz

A’ rèiteachadh a’ cheangail Wi-Fi

1. Make sure that there is no LAN cable connected to the device.
2. Make sure that TCP port 22020 is enabled for incoming and outgoing connections within your firewall.
3. Make sure that your seca device is powered by the supplied power supply.
4. Brùth an button on the device display to access the device settings.
5. Cleachd an buttons to get to the “About” menu and call it up.
6. Cleachd an to access the “System Version” submenu.
7. The version number is displayed in green letters. This guide describes the WLAN configuration from firmware version 1.9.0 onwards. If the firmware version number is not displayed in green letters, please contact seca Service.
8. Cleachd an to get to the “Network” menu and call it up.
9. Go to the “WiFi” menu.
10. Cuir an gnìomh WiFi an gnìomh.
    
11. Press the “Scan” menu.
    The device will now search for available WiFi networks. This may take a moment.
12. Select the network to which you want to connect the seca device. (Example here: SECA-RD- RADIUS with WPA2 AES encryption standard)
    An aire: Only 2.4 GHz WiFi networks are supported.
13. Enter the username (if required) and password for the selected WiFi network. To do this, press into the respective text field. After successfully entering, press the “Connect” button. Bidh an inneal seca a-nis a’ stèidheachadh ceangal ris an lìonra WiFi a chaidh a thaghadh. Cho luath ‘s a thèid an ceangal a stèidheachadh, thèid sin a chomharrachadh leis an teachdaireachd “Connected” air cùl an lìonra a chaidh a thaghadh.
14. Brùth an putan gus falbh bhon chlàr. Tha neart comharra an lìonra WiFi ceangailte a-nis air a thaisbeanadh aig mullach an taisbeanaidh.
15. Go to the “Network” menu again (see steps 4 and 5). Then select “Server Address”.
16. Enter the server name gpx.secacloud.com (gpx.us.secacloud.com for the US) of the seca cloud server. Confirm your entry with the putan.

seca.com

Ceistean Cumanta