Fender Quantum HD Software User Manual

Fender Quantum HD Software

Sònrachaidhean

• Product Name: Quantum HD Series
• Interface Type: Audio Interface
• Manufacturer: Fender
• Co-fhreagarrachd: Windows, macOS
• Ceangal: USB-C

Thairisview

• This Software User Manual details how to use Universal Control to control Quantum HD audio interface. Before jumping in, make sure you’ve registered your device and installed Universal Control, as it provides updates and upgrades for your Quantum interface.
• For more information about the Quantum HD, including hardware features, hookup diagrams, and getting started with the interface, please review an leabhar-làimhe sealbhadair Quantum agad.

Pròiseas Clàraidh is Stàladh toraidh
Tha do Quantum HD na eadar-aghaidh claisneachd cumhachdach, air a luchdachadh le innealan claisneachd proifeasanta agus smachdan sgrùdaidh sùbailte. Mus ceangail thu ri coimpiutair, feuch an tadhal thu www.fender.com and navigate to the Quantum HD product page to verify the latest system requirements for your interface. Once you’ve verified that you meet the latest system requirements, follow these steps:

1. Visit My.Fender.com and create or log into your user account.
   • Note: If you have previously created a MyPreSonus account, you can use these credentials on MyFender.com to log in. All of your previous registered PreSonus products will be available from the new unified MyFender account experience.
2. At the top of your MyFender homepage, click onto the “Register Products” button. After clicking, a dialog window will appear.
3. From the dialog window, specify the date you purchased the interface and the serial number on your interface. After you’re done,click “Register.”
4. After clicking Register, another dialog window will appear where you can initiate your Fender Studio Pro downloads.
5. To download Universal Control, navigate to the Quantum HD product page from your MyFender homepage.

Thoir an aire:
The speed of your processor, amount of RAM, and capacity, size, and speed of your hard drives will greatly affect the overall performance of your recording system. A faster processor and more RAM can reduce signal latency (delay) and improve overall performance.When connecting to Universal Control, you have two options:

• Connect and sync your Quantum HD interface to your desktop via USB-C connection. This option allows you to use Universal Control while recording and playing back audio through Fender Studio® Pro or a third-party DAW of your choice.
• Connect your desktop, Apple iOS / Android device, or iPad to the same wireless network. This option will allow you to use any or all of these devices to remote control your Quantum interface anywhere in the studio or venue.

The following sections detail the Universal Control installation process for Windows, Mac, iPad, and Apple iOS / iPadOS /
Innealan Android.

Thoir an aire:
Make sure your Quantum interface firmware version is up to date from your computer before connecting to the device any other way.

Stàladh smachd uile-choitcheann airson Windows

• Ceangail an eadar-aghaidh Quantum agad ri port USB-C a tha ri fhaighinn agus cuir air bhog an stàlaichear. Bheir an stàlaichear Smachd Uile-choitcheann thu tro gach ceum den phròiseas stàlaidh.
• This application will install the ASIO drivers. Please read each message carefully. It is recommended that you quit all applications before you start the installation.

Stàladh smachd uile-choitcheann airson macOS

• Ceangail an eadar-aghaidh Quantum agad ri port USB-C a tha ri fhaighinn agus cuir air bhog an stàlaichear. Bheir an stàlaichear Smachd Uile-choitcheann thu tro gach ceum den phròiseas stàlaidh.
• Feumaidh innealan sreath Quantum draibhear àbhaisteach. Tha an draibhear seo air a ghabhail a-steach san app Smachd Uile-choitcheann.
• Às deidh dhut Smachd Uile-choitcheann a chuir a-steach agus a chuir air bhog, faodaidh tèarainteachd macOS do bhrosnachadh gu “Ceadaich leudachadh an t-siostam draibhear claisneachd.”
• For macOS 15/26 Users: Open System Settings → General → Login Items & Extensions → click the “i” icon next to Universal Control.
• Bheir an siostam obrachaidh roghainn dhut de “OK” no “Open System Settings.” Tagh “Roghainnean an t-siostaim fhosgailte,” no ma tha thu air briogadh air “OK,” fosgail Roghainnean an t-siostaim> Prìobhaideachd & Tèarainteachd.
• Nota airson luchd-cleachdaidh macOS: Nuair a bhios an stàladh deiseil, lorgaidh tu an tagradh Smachd Uile-choitcheann sa phasgan Tagraidhean agad. Thathas a’ moladh gun cuir thu seo san doca agad airson gum bi e furasta faighinn thuige.

Airson luchd-cleachdaidh macOS 12/13:

• Tagh “App Store agus luchd-leasachaidh aithnichte” mura h-eil sin air a shuidheachadh mar-thà. Tagh “Ceadaich” gus an urrainn do Smachd Uile-choitcheann an draibhear Quantum a chuir ris. Cuir a-steach am facal-faire siostam agad mar a dh’ iarrar.

Airson luchd-cleachdaidh macOS 14:

• Tagh “App Store agus luchd-leasachaidh aithnichte” mura h-eil sin air a shuidheachadh mar-thà. Cliog air “Mion-fhiosrachadh.”
• Tagh do dhòigh dearbhaidh.
• Cuir an gnìomh na Roghainnean Smachd Uile-choitcheann agus cliog air OK.
• Tha thu a-nis deiseil airson do Quantum ùr a chleachdadh!

Universal Control Installation for Apple iOS / iPadOS / Android
To remote control your Quantum interface with Apple iOS / iPadOS / Android devices, you must first locate and install the Universal Control application onto your Apple iOS / iPadOS / Android device from your app store. Once downloaded, you can use Universal Control with an Apple iOS / iPadOS / Android device by connecting to the same wireless network as the computer that is connected via USB to your Quantum interface.

Thoir an aire:
Quantum interface firmware can only be updated from your computer. Firmware updates from Universal Control are not available from Apple iOS / iPadOS / Android mobile devices.

iPadOS Low Latency Driver

• When using the latest iPad Air M3 and iPad Pro M5, round trip lag (latency) can be reduced by up to 40% (2-3ms less latency) by enabling the Quantum USB Audio Driver from your iPad settings. Once Universal Control is installed on your iPad, navigate to iPadOS’s Settings > Apps > Universal Control and turn on the Quantum USB Audio Driver.
• Note: This driver only applies to Apple iPadOS 18+. Not applicable to any earlier iPadOS versions nor any version of Android.

Mobile Compatibility Modes

• Due to limitations to some operating systems, the Quantum HD includes various mobile modes, which allows it to be used on Android devices with Android version 14 or later.

When using Quantum HD with a device that has Android 14+, ensure that the correct mobile mode is selected. To change modes from your Quantum HD, press and hold  the knob until the “Settings” screen appears. Navigate to “Mobile Mode” (shown as “Device Mode” in Universal Control), then press the knob to select a mode.

• Off: Use this mode for macOS, Windows, and iOS / iPadOS devices (no channel or sample rate limitations).
• Android: Use this mode for Android OS 14+ devices. This option is best for most applications and supports 2 (QHD 2) or 8 (QHD 8) input channels.
• Android+: This mode is also used for Android OS 14+ devices (for use with specific applications that can access full channel counts).

Thoir an aire:
An ìre as àirde sample rate possible for both Android and Android+ modes is 48 kHz.

Smachd Uile-choitcheann

• Universal Control is both a driver-management utility and software control interface for your Quantum Interface

Tha Smachd Uile-choitcheann a’ toirt seachad na leanas:

• Hardware Control. All of Quantum’s front panel hardware controls can be adjusted using Universal Control, facilitating easy hardware manipulation even if Quantum is installed in a location out of reach of the computer operator.
• Sgrùdadh latency ìosal. Le bhith a’ cleachdadh Smachd Uile-choitcheann cuir às don latency co-cheangailte ri buffering DAW I / O a tha a’ fàgail sgrùdadh duilich don neach-cluiche. Le bhith a’ toirt air falbh feart sgrùdaidh cuir a-steach bathar-bog DAW bhon t-sruth chomharran sgrùdaidh gu tur, chan eil feum air meudan bufair I/O atharrachadh agus latency na chùis tuilleadh.
• Send / Cue Busaichean. Tha busaichean stereo aux aig Universal Control, le ìrean cur a-steach neo-eisimeileach gach cuir a-steach.
• Riaghladh Configuration (Seallaidhean). Faodar rèiteachadh Smachd Uile-choitcheann a shàbhaladh agus a luchdachadh gu / bho diosc mar Seallaidhean, airson riaghladh seisean goireasach agus gun chrìoch.

Universal Control has two main components: the Start and the Mixer pages. We’ll go into more detail about each in the sections below.

Universal Control Start Page
Universal Control contains driver support, software control, monitor mixing, and firmware management for Fender and PreSonus hardware. After opening Universal Control, you will see the Launch window. From this window, you can manage all the driver settings.

• Sampan ìre. Atharraicheas an sample ìre. Faodaidh tu an sample ìre gu 44.1, 48, 88.2, 96, 176.4, no 192 kHz. S nas àirdeampàrdaichidh le rate dìlseachd a’ chlàraidh, ach àrdaichidh seo cuideachd an file meud agus an uiread de ghoireasan siostam a tha riatanach gus an claisneachd a phròiseasadh.
• Stòr Cloc. Suidhich an Stòr Cloc Didseatach. Bhon chlàr seo, faodaidh tu an Stòr Cloc a shuidheachadh airson an eadar-aghaidh Quantum HD agad. Taobh a-staigh, taobh a-muigh S / PDIF, ADAT taobh a-muigh, no Wordclock (Quantum HD 8 a-mhàin).
• Buffer Size (Windows only). Sets the Buffer Size. From this menu, you can set the Buffer Size for your Quantum HD interface from 16 to 2048 samples. Lowering the buffer size will reduce the overall latency. However, this will also increase performance demands on your computer. In general, you will want to set the buffer size as low as your system can safely support. If you begin to hear pops, clicks or distortion in your audio path, try raising the buffer size.
• Device Mode (HD8 only): Displays the current device mode.
• Input Format. Details your device, input channels, and bitrate.
• Cruth toraidh. Mion-fhiosrachadh mu shianalan toraidh an uidheim agad agus bitrate.
• Firmware. A’ taisbeanadh an tionndadh firmware gnàthach.
• Àireamh sònraichte. A’ taisbeanadh an àireamh sreathach Quantum agad.

A 'cur air bhog an Universal Control Mixer
Universal Control’s Mixer can be launched from the Universal Control application (Start Page).

1. Fosgail Smachd Uile-choitcheann.
2. From the Universal Control Start Page, click on the product card for the Quantum HD Control Panel (mixer).
3. Fosglaidh am Measgadair Smachd Uile-choitcheann ann an uinneag eile.

A 'fàgail smachd uile-choitcheann

Airson luchd-cleachdaidh macOS:

• Tagh “Sguab às Smachd Uile-choitcheann” bhon chlàr tagraidh macOS nuair a tha Smachd Uile-choitcheann mar an aplacaid aghaidh.
• Cleachd an ath-ghoirid meur-chlàr macOS àbhaisteach: Command + Q.

Airson luchd-cleachdaidh Windows:

• Cliog air a’ phutan dùin “X” ann am Bàr Tiotal na h-uinneige.

Measgadair smachd uile-choitcheann
Universal Control’s layout and functionality is similar to what is found on analog mixers and shares many elements with Fender Studio Pro’s mixer layout.

Bàr-seòlaidh
The navigation bar has two options to choose from:

• Scenes. Shows / Hides the Scenes panel. See section 2.2.7 Scenes for more information about how to use this feature.
• Pannal roghainnean. A 'sealltainn / a' falach a 'phannal Settings (a' dol an àite a 'mheasgachaidh). Faic earrann 2.2.8 Pannal nan Roghainnean airson tuilleadh fiosrachaidh mu mar a chleachdas tu am feart seo.
• Power Button. Turns the mixer on or off. Turning the mixer “off” bypasses the mixer in Universal Control, which can be helpful if you would like to mix and create cue mixes directly in the DAW.

Sianal seachadview

Toraidhean seanail

• Bidh gach stiall cuir a-steach seanail a’ cumail smachd air cuir a-steach bathar-cruaidh Quantum no cuir a-steach brìgheil. Bidh toradh a h-uile cuir a-steach seanail an-còmhnaidh air a stiùireadh gu prìomh thoraidhean 1 agus 2 (ach a-mhàin nuair a tha iad sàmhach). Faodar cuir a-steach a chuir gu roghnach gu toraidhean eile tro Sends agus smachdan FlexChannel. Tha cuir a-steach seanail Smachd Uile-choitcheann gu ìre mhòr an aon rud airson a h-uile cuir a-steach; ge-tà, tha beagan eadar-dhealachaidhean eadar na cuir a-steach analog agus didseatach mar a chithear gu h-ìosal.

Smachdan cuir a-steach sianal

• High Pass Filter (HPF). Engages/disengages an HPF at 80 Hz with a slope of 12 dB per octave.
• 48V. A ’dol an sàs / a’ cuir às do chumhachd phantom 48V airson a chleachdadh le microfònan condenser.
• Autogain. Suidhich gu fèin-ghluasadach buannachd airson an t-sianail taghte.
• Pad. Cycles through -20 dB or no pad attenuation (default). Pad does not affect the Line or Instrument inputs.
• Ro-làimhamp Faigh ìre. Cleachd an smachd seo gus a’ bhuannachd (0 dB gu +75 dB) a shuidheachadh airson do mhicreofon no ionnstramaid.
• Line Input Level. If a line-level signal is connected through the TRS port of the combo jack, then preamp faigh suidsichean smachd gu smachd Ìre Loidhne (-12 dB gu +12 dB).
• Faigh Luach. A’ taisbeanadh an luach iomlan airson a’ Bhuannachd làithreach. Dèan briogadh dùbailte air an luach gus luach sònraichte a chur a-steach.

A' cur
Controls the send level of the audio being sent to the Return FlexChannel. Depending on your hardware, different amounts of outputs will be available as Sends. Loopback virtual outputs can be shown in Settings as well (see section 2.2.8 Settings Panel).

• Cuir Ceann-uidhe. A’ sealltainn a’ phaidhir toraidh a thathas a’ cur claisneachd thuige.
• Send Ìre. A’ cumail smachd air an ìre iomlan a thèid a chuir gu paidhir toraidh.
• Note: If Speaker Switching is active, outputs 3 – 4 will be disabled for Sends.

Measgadair smachd uile-choitcheann

Smachdan measgachadh

• Pan. A ’suidheachadh suidheachadh a’ phana airson a ’chomharra ann am measgachadh stereo (cuideachd a’ buntainn ri Sends).
• Mut. Mutes an comharra (cuideachd a’ buntainn ri Sends).
• Solo. Solos an comharra (a’ cuir dheth a h-uile seanal eile sa Phrìomh Mheasgachadh).
• Togbhail Ceangal Mono / Stereo. A’ cothlamadh 2 sheanail faisg air làimh den aon sheòrsa ann an sianal stereo.
• Luach Ìre gnàthach. A’ taisbeanadh an luach iomlan airson na h-ìre làithreach. Dèan briogadh dùbailte air an luach gus luach sònraichte a chur a-steach.
• Meatair sianal. A’ taisbeanadh an ìre aig a bheil am micreofon no an ionnstramaid agad aig an àm seo.
• Sianal Fader. A’ cumail smachd air ìre iomlan an t-seanail sa Phrìomh Mheasgachadh.
• Àireamh Sianal. A’ nochdadh àireamh an t-sianail.
• Ìomhaigh sianal. Tagh bho liosta de dh’ ìomhaighean airson an t-seanail
• Ainm seanail. Dèan briogadh dùbailte gus ainm àbhaisteach a chruthachadh airson an t-seanail.
• Dath sianal. Cliog air an àite gus na roghainnean dath seanail a shealltainn.

Tilleadh FlexChannel
Bidh seanailean cuir a-steach an-còmhnaidh air an stiùireadh gu Prìomh Thoraidhean 1 agus 2. Ach, faodar na cuir a-steach a chuir gu roghainn bathar-cruaidh sam bith a tha ri fhaighinn no sruth Loopback tro Sends agus an FlexChannel.

• Tagh tilleadh. Tagh an t-Sruth Tilleadh no Loopback gus a bhith fo smachd stiall an t-seanail.
• Copy / Paste Mix: Copying the current mix allows you to quickly set up multiple mixes. Right-click on the fader for copy and paste options.
• Fader Flip: When Flip is activated, fader controls switch to represent the per-channel Send levels of the chosen Send destination. Faders will change to green to indicate Flip is active; when activated, the fader controls the send level rather than the channel volume.
• Mut. Cuir dheth an t-sruth Tillidh no Loopback taghte.
• Fònaichean ag èisteachd. Faodaidh tu èisteachd ri gin de na measgachaidhean le bhith a’ cliogadh air an ìomhaigh headphone. Cuiridh seo am measgachadh taghte gu Headphone 1 (ma tha barrachd air aon fhòn-cinn), gus an urrainn dhut na measgachadh cue agad a chluinntinn.
• Mono / Stereo toggle. A 'togail an t-sianail eadar sianal stereo no sianal mono geàrr.
• Luach Ìre gnàthach. A’ taisbeanadh an luach iomlan airson na h-ìre làithreach. Cliog air an luach gus luach sònraichte a chuir a-steach.
• Meatair sianal. A’ taisbeanadh an ìre làithreach.
• Sianal Fader. A’ cumail smachd air an ìre iomlan airson an t-sruth Tilleadh no Loopback taghte.
• Ìomhaigh sianal. Tagh bho liosta de dh’ ìomhaighean airson an t-seanail
• Ainm seanail. Dèan briogadh dùbailte gus ainm àbhaisteach a chruthachadh airson an t-seanail.
• Dath sianal. Cliog air an àite gus an neach-togail dhathan a shealltainn.

Smachdan sgrùdaidh
Anns an stiall Smachd Monitor tha eileamaidean co-cheangailte ri prìomh thoraidhean, fònaichean-cluaise, agus atharrachadh neach-labhairt.

• Prìomh Ìre a-muigh. Is e seo an smachd ìre maighstireachd airson Prìomh Thoraidhean Quantum 1 agus 2. Bidh e a’ coileanadh an aon ghnìomh ris a ’phannal aghaidh no mullach Knob on Quantum.
• Headphone Level. These is the level controls for Headphone Output 1 and 2. It performs the same function as the Knob on Quantum’s front or top panel when the Knob is switched to Headphone control. The Quantum HD 2 only has one headphone output.
• Dim. A ’lughdachadh a’ phrìomh thoraidhean leis an t-suim a chaidh a shuidheachadh ann an Settings (is e -10 dB an àbhaist)
• Neach-labhairt Ag atharrachadh tog. Nuair a bhios Speaker Switching gnìomhach, atharraichidh an dàrna cuid an seata neach-labhairt A no an neach-labhairt seata B. Thoir an aire nach eil an roghainn seo ri fhaighinn agus gun tèid a ghlasadh a-mach mar as àbhaist.
• Mut. A’ cuir às don phrìomh toradh. Chan eil mute a’ toirt buaidh air fònaichean-cluaise.
• Fònaichean ag èisteachd. Cuiridh seo am prìomh mheasgachadh (toraidhean 1/2) gu Headphone 1.
• Level Value. Displays the absolute value for the current level. Click on the value to enter a
  luach sònraichte.
• Cumail sùil air meatairean. Bidh na meatairean sin a’ taisbeanadh ìrean comharran a’ bhus measgachadh monitor dìreach ron smachd ìre monitor.
• Sianal Fader. A 'cumail smachd air an ìre iomlan airson na prìomh thoraidhean. Tha an smachd tomhas-lìonaidh seo neo-eisimeileach bhon phrìomh encoder. Ma thèid am fader a thionndadh sìos, cha tèid claisneachd a-steach don phrìomh smachd tomhas-lìonaidh.
• Àireamh Sianal. A’ nochdadh àireamhan sianal.
• Channel Icon. Choose from a list of icons for the channel. All Icons can be shown/hidden from the Settings panel.
• Ainm seanail. Dèan briogadh dùbailte gus ainm àbhaisteach a chruthachadh airson an t-seanail.
• Dath sianal. Cliog air an àite gus an neach-togail dhathan a shealltainn. Faodar an sianal gu lèir a dhath ann an Settings.

Seallaidhean
Leigidh Smachd Uile-choitcheann leat leabharlann de “seallaidhean” a chruthachadh agus a stòradh. Tha sealladh coltach ri dealbh den mheasgachadh agad: Bidh e a’ stòradh gach paramadair seanail airson a h-uile cuir a-steach analog, a bharrachd air suidheachadh gach fader, measgachadh aux, fuaim seanail agus solos, msaa.

Bidh seallaidhean a’ toirt seachad dhòighean airson a bhith a’ riaghladh rèiteachadh measgachaidh Smachd Uile-choitcheann mar ro-aithris àbhaisteach files. When a Universal Control Scene is saved, the current Universal Control configuration is saved to your computer. When a Scene is subsequently reloaded, Universal Control is returned to the same configuration state, regardless of any changes to Universal Control that were made in the interim.

• Ìomhaigh nan seallaidhean ( ): Select to open (blue) and close (gray) the Scenes window.
• Save: Saves the current mixer configuration to the selected Scene (overwrite).
• Load: Loads the selected Scene (double-clicking the chosen Scene will also load it).
• Store Scene: Click the plus icon to save the current mixer configuration and give it a name.
• Delete Scene: Deletes the selected Scene.

Pannal roghainnean
Tha paramadairean cruinne airson Quantum agus Smachd Uile-choitcheann air an rèiteachadh anns a’ phana Settings:

Hardware Settings:

• Sends. Changes which outputs are available for Sends (For more information, check out Section 3.1.2).
• Main Encoder. Select which speaker(s) are controlled by the knob.
• Atharrachadh neach-labhairt. Tagh an giùlan airson atharrachadh neach-labhairt nuair a phutas tu am putan Prìomh Smachd.
• Headphone Source Selector (“HP Source”). Selects the source for the Headphone Output 1 or 2. Access to certain headphone sources is dependent on the Quantum model.
• S/PDIF Output Source. Selected which source is sent out of the S/PDIF RCA port.
• Giùlan Putan Mute. Tagh a bheil am putan gu h-àrd no air a’ phannal aghaidh Mute a’ gluasad claisneachd aig na prìomh thoraidhean, no a’ lughdachadh na claisneachd.
• Meud Dim. Atharraich an ìre de dim a thèid a chuir an sàs nuair a tha Dim an sàs (is e -10 dB an àbhaist)
• Soilleireachd LED. Ag atharrachadh soilleireachd iomlan nan LEDan gu lèir (is e an àbhaist 100%)
• Ath-shuidheachadh factaraidh. Ath-shuidheachadh a h-uile paramadair gu suidheachadh factaraidh.

Roghainnean UI:

• Dèan dath air sianalan. A’ cur an dath seanail a thagh thu an-dràsta ris an t-Sianail gu lèir.
• Cùm stùc. Toggles Peak Cùm air no dheth.
• Show all Digital (Quantum HD only). Shows or hides all ADAT and S/PDIF inputs in the mixer. Hidden by default.
• Show all Loopback. Shows or hides all Loopback Inputs, Stream Mix Sends, and Flex Mix Stream Mixes in the mixer. Hidden by default.
• Edit Popup: Shows or hides the popup editor.
• Crìonadh meatair. Suidhich an lughdachadh meatair gu slaodach, meadhanach no luath.

A’ cleachdadh Measgadair Smachd Uile-choitcheann

Cùl-lùb
Loopback audio is the industry term for routing audio from one application to another. Applications that use audio interfaces, like your Quantum interface, are designed to receive audio from one audio device and send audio to one audio device. This means that most applications can only send to and receive from an audio interface, but not from other applications. This can present a challenge in certain situations. Fortunately, Quantum HD audio interfaces allow you to take audio from any of Universal Control’s mixer inputs (mics, guitars, computer audio, etc.) and send the combined audio to another application for the purpose of recording or live streaming.

Mar a chleachdas tu Loopback
Ma tha thu airson am feart Loopback a chleachdadh, lean an stiùireadh gu h-ìosal:

1. Make sure that your Quantum HD is selected as the Windows or macOS playback device.
2. In your DAW or software application, choose the channel input labeled Loopback 1 or Loopback 2. Any audio sent to Loopback 1 or 2 will be available as a virtual input in your DAW or other software applications (not all software applications support multichannel inputs).
   Note: Loopback inputs are disabled at sample ìrean de 176.4 agus 192 kHz.
3. In Universal Control’s mixer window, adjust the send level to whichever Loopback send you’ve selected in Fender Studio Pro.
   • Loopback 1 Send ìre. Atharraich an ìre de chlaistinn a bu mhath leat a chuir gu sruth Loopback 1.
   • Loopback 2 Send ìre. Atharraich an ìre de chlaistinn a bu mhath leat a chuir gu sruth Loopback 2.
4. Às deidh dhut an ìre cuir Loopback atharrachadh, chì thu ìrean meidheadaireachd a’ nochdadh taobh a-staigh an DAW no an t-sianal tagradh bathar-bog a chuir thu air chois. Cho luath ‘s a nochdas tomhas-tomhais, tha thu deiseil airson tòiseachadh air claisneachd a chlàradh.

RABHADH:
Dèan cinnteach gu bheil an sianal san DAW agad air a thàthadh mus clàraich thu comas gus lùban fios-air-ais a sheachnadh.

Quantum ioma-sianal
Multichannel is a hardware and software operating mode that can be configured using Universal Control. Quantum HD 2 and HD 8 interfaces can be used as an all-in-one monitoring hub for some multichannel formats (depending on the amount of analog outs per device).
Nuair a thèid modh ioma-seanail a thaghadh, bidh smachd aig a’ chnap air a h-uile meud neach-labhairt aig an aon àm. Airson tuilleadh fiosrachaidh mu gach aon de na roghainnean Multichannel, review an liosta gu h-ìosal:

• None: Knob control is disabled and unity audio will be sent out of all outputs.
• All: The knob will control the output volume for all outputs at the same time.
• 1 – 2: The default Main Encoder mode. The knob will control the output volume for Main Outputs 1 and 2.
• 1 – 4: The knob will control the output volume for Outputs 1, 2, 3, and 4 all at the same time.
• 1 – 6 (Quantum HD 8 only): The knob will control the output volume for Outputs 1, 2, 3, 4, 5, and 6 all at the same time.
• 1 – 8 (Quantum HD 8 only): The knob will control the output volume for Outputs 1, 2, 3, 4, 5, 6, 7, and 8 all at the same time.
• All + ADAT: The knob will control the output volume for all outputs (including the ADAT connected HD 8) at the same time.

RABHADH:
Full-scale audio will be sent out of Main Outputs 1 and 2. Main Outputs 1 and 2 will be muted when this mode is selected to avoid damaging speakers or other equipment.

Using Your Quantum Interface

Mar eadar-aghaidh claisneachd

• The Quantum HD functions like other audio interfaces when used without the Universal Control application installed. Quantum HD’s class-compliant (macOS) and WDM drivers (Windows) enable it to be used for computer audio I/O routing with any compliant software with some limitations.

Cleachdadh leis fhèin (HD 8 ADAT Roamp Leudachadh)
The Quantum HD 8 can be used to add mic pres to another Quantum HD running in audio interface mode (with Universal Control installed) or a third party audio interface that supports ADAT optical inputs as well as S/MUX and its variants. To use a second or third Quantum HD as a standalone preamp through ADAT, access the secondary or tertiary Quantum HD’s Global Settings when not connected to a computer and set the Standalone mode to “ADAT.” By default, this mode is set to “Mixer.”

• As long as the additional HD 8 is put into ADAT mode, and the clock source is set to externally clock via SPDIF, ADAT, or Word Clock, the 48V and Gain Knob controls will be present at the top of each ADAT fader.
• Note: When in ADAT mode, the knob of the HD 8 expansion will no longer control volume and will blink 3 times if turned in either Main or Headphone control modes.
• The knob will still control gain level if a channel is selected.
• If you select “All + ADAT” from the Main Encoder settings, the knob will control the output volume for all outputs (including the ADAT connected HD 8) at the same time.
• Note: As with any of the other Main Encoder link modes, as outputs get assigned to be controlled by the knob, those outputs paths become unavailable as Sends for cue mix routing, etc.

 Send Routing Options
Quantum HD interfaces have two send options located in the Universal Control settings panel. Depending on which option is selected, ADAT Sends and computer playback channels (ex., USB 5/6) will become available or unavailable. In either mode, Loopback 1 and Loopback 2 are available as Sends on any input channel.

• Analog Out (default). When analog out is selected, Sends can only be routed to the physical analog outputs of Quantum (for example, Out 3/4, Out 5/6, etc.). When this option is selected, ADAT signals can be easily routed from your DAW.
• Analog + ADAT. When Analog + ADAT is selected, the mixer is reconfigured so that all analog and ADAT outputs are available as Sends on input channels. When this option is selected, the computer playback input channels (USB 5 – 10) will no longer be available in UC’s mixer and all ADAT signal routing must be done through Universal Control. In other words, ADAT will not pass if routed from a DAW.

NOTA:
Aig sample rates greater than 96 kHz, all digital inputs are disabled as well as Loopbacks 1 and 2.

Le smachd uile-choitcheann

• Quantum HD and Universal Control can be used without a DAW or any other software. Using Universal Control without a DAW provides access to all Quantum HD functionality and simplifies the use of Quantum HD’s digital mixing and monitoring when a DAW is not needed.

Ainmean dràibhear Quantum I/O

• Each Quantum input and output has a channel number and name provided by the Quantum HD drivers on macOS and Windows. If an audio software application can access Core Audio / ASIO devices directly, it may be possible to designate specific inputs and/or outputs within the application.

Suidhichidhean smachd uile-choitcheann a thèid a chumail às deidh Power Cycle

• All currently active Main Mix settings (channel volume level, pan position, solo, mute, and stereo link) and monitor settings (main and headphone output levels) are saved to internal firmware before your Quantum HD are powered down, and recalled when power
  is reapplied.

Thoir an aire:
Chan eil atharrachaidhean air an sàbhaladh sa bhad. Feuch an leig thu suas ri 10 diogan airson na roghainnean a shàbhaladh don inneal mus cuir thu cumhachd sìos.

Le DAW (às aonais smachd uile-choitcheann)

• Nuair a thèid a chleachdadh le DAW ach às aonais an tagradh Smachd Uile-choitcheann, bidh an DAW a’ cumail smachd air a h-uile slighe comharra I / O agus sgrùdadh bathar-bog.

A’ cumail sùil leis an DAW

• Is e prìomh obair Smachd Uile-choitcheann sùil a chumail air cuir a-steach Quantum rè coileanadh beò. Nuair a tha sgrùdadh bathar-bog air a chomasachadh anns an DAW, feumar sgrùdadh cuir a-steach Smachd Uile-choitcheann a chiorramachadh gus cuir às do chomharran dùbailte.
• Make sure to disable input monitoring in Universal Control when software monitoring via the DAW. If Universal Control’s input monitoring isn’t disabled (muted channel, fader down, or bypassed mixer), phasing and/or doubling of the monitored signal(s) will occur because the input signal is being heard twice – first from the low-latency DSP mix (Universal Control) and shortly thereafter from the higher latency software mix (DAW).

Mar a chuireas tu casg air sgrùdadh cuir a-steach ann an Smachd Uile-choitcheann

• Gus sgrùdadh cuir a-steach ann an Smachd Uile-choitcheann a dhì-cheadachadh nuair a bhios tu a’ cleachdadh sgrùdadh bathar-bog anns an DAW, fosgail Smachd Uile-choitcheann agus cuir sìos a h-uile seanal cuir a-steach taobh a-staigh Smachd Uile-choitcheann no cuir an gnìomh “Seach-rathad Mixer” anns na Roghainnean. Faodaidh smachd Uile-choitcheann a bhith dùinte an uairsin.
• Tha cleachdadh DAW às aonais Smachd Uile-choitcheann na shruth-obrach àbhaisteach aig àm measgachadh, far nach eil feum air sgrùdadh latency ìosal agus nach eil latency buffering na chùis leis gu bheil na slighean air an clàradh mu thràth. Nuair a bhios tu a’ clàradh slighean ùra, thathas a’ moladh sruth-obrach DAW agus Smachd Uile-choitcheann (mar a tha air a mhìneachadh san earrann a leanas).
• Anns an t-suidheachadh seo, tha Quantum ag obair mar eadar-aghaidh claisneachd. Bidh an DAW a’ faighinn a-steach agus a’ stiùireadh eadar-aghaidh claisneachd Quantum I/O tro na draibhearan inneal. Tha latency claisneachd I / O air a dhearbhadh leis an t-suidheachadh Meud Buffer I / O.

Le DAW (le smachd uile-choitcheann)

• Bithear a’ cleachdadh Smachd Uile-choitcheann aig an aon àm ri DAW nuair a thathar ag iarraidh sgrùdadh latency ìosal. Bidh an sruth-obrach seo gu tur a’ cur às do na h-amannan buffering I / O co-cheangailte ri sgrùdadh bathar-bog. Anns an t-suidheachadh seo, thathas a’ cleachdadh Smachd Uile-choitcheann gus smachd a chumail air a h-uile sgrùdadh cuir a-steach nuair a thathar a’ clàradh, agus bu chòir feart sgrùdaidh bathar-bog an DAW a bhith ciorramach.

Sgrùdadh Bathar-bog an aghaidh Sgrùdadh Bathar-cruaidh

• Tha latency faicsinneach aig sgrùdadh bathar-bog (ag èisteachd ri cuir a-steach beò tro mheasgaiche DAW) mar thoradh air buffering eadar-aghaidh claisneachd I / O. Chan eil latency faicsinneach aig sgrùdadh bathar-cruaidh tro mheasgaiche DSP a-staigh eadar-aghaidh claisneachd (me, an tagradh Smachd Uile-choitcheann) leis gu bheil an claisneachd beò air a stiùireadh a-staigh gu dìreach bho na cuir a-steach gu na toraidhean às aonais buffering DAW I / O.

A’ cumail sùil le smachd uile-choitcheann

• Is e prìomh obair Smachd Uile-choitcheann a bhith a’ cumail sùil air cuir a-steach Quantum rè coileanadh beò. Nuair a thèid a chleachdadh le DAW, bidh Smachd Uile-choitcheann air a chleachdadh mar mheasgadair sgrùdaidh a bhios ag obair air leth bho mheasgaiche sgrùdaidh bathar-bog DAW.
• Make sure to disable Software Monitoring in the DAW when using Universal Control. When Universal Control is used for live input monitoring with a DAW, the DAW’s software monitoring feature should be disabled. If it isn’t, phasing and/or doubling of the monitored signal(s) will occur because the input signal is being heard twice – first from the low-latency DSP mix (Universal Control) and shortly thereafter from the higher latency software mix (DAW).

Cùl-lùb
Quantum’s device drivers carry virtual (software only) input and output channels in addition to those directly associated with the hardware inputs and outputs. Loopback facilitates highly flexible signal routing via the DAW, without needing to reach behind the gear rack for manual cable patching. Additionally, since the loopback audio streams are in the digital domain, a pristine audio signal path is maintained without requiring additional A/D – D/A conversions. Loopback sends enable any input to be routed directly into Universal Control’s FlexChannel (see section 2.3.2 in this manual for more information).

Ath-shuidheachadh inneal
Ma thachras tu air duilgheadas leis an Quantum agad agus gu feum thu an inneal ath-shuidheachadh, faodaidh tu ath-shuidheachadh gu roghainnean bunaiteach an uidheim no tilleadh gu firmware a bh’ ann roimhe.

Roghainnean inneal bunaiteach
Ma tha feum air, faodaidh tu am measgaiche bunaiteach a thoirt air ais (preamp gain, output levels, etc.) and system settings (speaker switching modes, headphone mix sources, etc). To restore the default system settings:

• Ann an Smachd Uile-choitcheann, gluais gu Settings (ìomhaigh gèar)
• Brùth air a’ phutan “Factaraidh Ath-shuidheachadh”.
• Nochdaidh bogsa dearbhaidh
• Tagh “Ath-shuidhich” gus dearbhadh no “Sguir dheth” gus an ath-shuidheachadh a chuir dheth

Till air ais gu Firmware Roimhe
Gus tilleadh gu firmware roimhe:

1. Dì-stàlaich an tionndadh làithreach de Universal Control
2. Stàlaich an dreach de Universal Control aig a bheil am firmware roimhe
3. Le cumhachd Quantum air, fosgail Smachd Uile-choitcheann agus cliog air “Ùraich Firmware”
4. Canaidh brath gu bheil am firmware agad ùraichte agus gun ùraich thu co-dhiù
5. Tagh "Ùraich co-dhiù" agus lean am pròiseas

Thoir an aire:
If your Quantum HD ever becomes unresponsive, press and hold the knob while powering on to enter firmware recovery mode.

Quantum Control from Fender Studio Pro
Your Quantum HD interface can be controlled directly from Fender Studio Pro (only compatible with version 6.6.1 or higher). After configuring the inputs and outputs of your interface within Fender Studio Pro, you’ll have easy control over various channel parameters, including channel Preamp Gain, Phantom Power, High Pass Filter, Auto Gain and Pad (HD only). To set up your Quantum Interface in Fender Studio Pro, follow the directions below. Once all cable connections are made and you have updated the Quantum’s firmware:

1. Launch Fender Studio Pro.
2. Navigate to Studio Pro/Options/Audio Setup/Audio Device (macOS: Preferences/Audio Setup/Audio Device) to open the Audio Device settings window.
3. Tagh Quantum mar an dà chuid an inneal Playback agus Clàraidh.
4. Dèan rèiteachadh air inneal claisneachd no giullachd sam bith eile mar a thogras tu.
5. Cliog air OK.

Suidheachadh I/O

• Before creating your first song, it’s recommended that you first configure your Quantum Interface for input and output routing in Fender Studio Pro.
• To route Inputs and Outputs, go to Fender Studio Pro Preferences, then select “Audio Setup”. In the bottom left corner, select “Song Setup” to enter the Audio I/O Setup tab.

A’ sònrachadh bathar-cruaidh I/O gu seanalan I/O Bathar-bog

• Tha cuir a-steach agus toraidhean bathar-cruaidh air an sònrachadh do shianalan bathar-bog I / O ann an router matrix, a tha na riochdachadh lèirsinneach den t-slighe. Thathas a’ toirt sreath chòmhnard do shianalan bathar-bog (mono agus stereo), agus thathas a’ toirt a-steach bathar-cruaidh is toraidhean colbhan dìreach. Tha na puingean aig a bheil na sreathan agus na colbhan sin a’ dol tarsainn a’ riochdachadh cheanglaichean, no slighean, a dh’fhaodadh a bhith ann eadar bathar-cruaidh I/O agus seanailean bathar-bog I/O.
• By default, Fender Studio Pro creates three Input Channels: one stereo and two mono. These channels are labeled Input L+R (stereo), Input L (mono), and Input R (mono). By default, the stereo Input Channel receives input from the first stereo hardware input pair of your selected audio device. The two mono Channels receive input from the same stereo hardware input pair. The Output Channel is labeled Main Out (stereo) and is routed by default to the first stereo hardware output pair of your selected audio device.
• Gus slighe a chruthachadh eadar seanalan bathar-bog I / O agus bathar-cruaidh I / O, cliog air a’ cheàrnag fhalamh aig crois-rathaid cuir a-steach no toradh bathar-cruaidh a tha thu ag iarraidh agus cuir a-steach no toradh sianal bathar-bog. Bidh ceàrnag dathte a’ nochdadh le leubail M, L, no R, a’ nochdadh an e slighe mono (M) a th’ anns an t-slighe no taobh clì no deas slighe stereo (L no R).
• Nota: Aig s nas àirdeample rates, the number of available ADAT Inputs and outputs is reduced for each port. At 88.2/96 kHz, only ADAT channels 1–8 are available, and all digital is disabled at sample ìrean nas àirde na 96 kHz. Tha seanalan ADAT nach eil rim faighinn air an comharrachadh ann an teacsa clò eadailteach anns na duilleagan Cuir a-steach, Toradh, Bus, agus Cuir a-steach den t-suidheachadh I/O.

Suidheachadh cuir a-steach Quantum
From the Inputs tab, you can enable any or all of the inputs on your Fender Quantum audio interface that you’d like to have available. Use the “Add” button options below the matrix to add new inputs.

Feartan Quantum aonaichte

Suidheachadh toraidh Quantum
Gus an t-slighe toraidh a dheasachadh, cliog air an taba “Toraidhean” agus cuir toraidhean ris a ’cleachdadh na putanan Cuir ris fon router matrix.

Suidheachadh inneal bunaiteach I/O
We recommend that you create a default Audio I/O Setup that can be a starting point for all new Songs. This lets you immediately begin working on your new Song, with little or no preliminary setup. To do so, create software I/O channels for all of your audio device’s commonly used inputs and outputs and name them appropriately. Then, click on the “Make Default” button in the Audio I/O Setup menu, and a pop-up window appears to confirm that you wish to make the current I/O setup the default for new Songs. Click “Yes”, and from that point forward, all new Songs will be created with this audio I/O setup. You can always use the “Reset to Default” button to apply this configuration to a song.

Feartan Quantum aonaichte
Fender Studio Pro channel strips have integrated Quantum hardware controls built in when Quantum is selected as the Playback and Recording device in Studio One Pro. To access these control features, open the “Mix” console view from the Fender Studio Pro song page.

Feartan smachd sianal
Bidh feartan smachd an t-seanail air am fighe a-steach do mhullach gach seanail.

• Ro-làimhamp Faigh ìre. Cleachd an smachd seo gus a’ bhuannachd (0 dB gu +75 dB) a shuidheachadh airson do mhicreofon no ionnstramaid.
• Ìre cuir a-steach loidhne. Ma tha comharra ìre loidhne ceangailte tro phort TRS an t-seic combo, an uairsin roamp faigh suidsichean smachd gu smachd Ìre Loidhne (-12 dB gu +12 dB).
• Faigh Luach. A’ taisbeanadh an luach iomlan airson a’ Bhuannachd làithreach. Dèan briogadh dùbailte air an luach gus luach sònraichte a chur a-steach.
• Filter pas àrd. A’ dol an sàs / a’ cuir às do HPF aig 80 Hz le leathad de 12 dB gach ochdamh.
• Phantom Power (48V). Engages / disengages 48V phantom power for use with condenser microphones.
• Buannachd fèin-ghluasadach. Suidhich gu fèin-ghluasadach an ìre buannachd airson an t-sianail taghte.
• Pad: Reduces the overall gain level for the channel by -20 dB (microphone only).

Additional Fender Studio Pro Resources

Smachdan toraidh bathar-cruaidh Quantum
Fender Studio Pro has integrated Quantum hardware output controls built in when Quantum is selected as the Playback and Recording device in Fender Studio Pro.

• Headphone Source Selector. Select the source for the Headphone Output 1 or 2.
• Cumail sùil. Tagh dè an neach-labhairt / na luchd-labhairt a tha fo smachd a’ chnap.
• Dim. A ’lughdachadh a’ phrìomh thoraidhean leis an t-suim a chaidh a shuidheachadh ann an Settings (is e -10 dB an àbhaist).
• Mut. A’ cuir às don phrìomh toradh. Thoir an aire nach toir mute buaidh air fònaichean-cluaise.
• Speaker Switching toggle. When Speaker Switching is active, it changes to either speaker set A or speaker set B.
• Atharrachadh neach-labhairt. Tagh an giùlan airson atharrachadh neach-labhairt nuair a bhrùthas tu am putan Monitors Control.

Thoir an aire:
If you do not see either of these Quantum controls within Fender Studio Pro, make sure that the “Audio device controls” option is checked in the channel options:

Additional Fender Studio Pro Resources

• Operating instructions for Fender Studio Pro is beyond the scope of this Owner’s Manual, but Fender Studio Pro comes bundled with an array of demo and tutorial materials. For more detailed information about all of the available features in Fender Studio Pro, check out the Fender Studio Pro User Manual. You can access this manual at any time while Fender Studio Pro is open by navigating to Help/Fender Studio Pro User Manual or by pressing the F1 key on your keyboard.
• 311 CESSNA CESSCLE
• CORONA, CALIF. 92878
• Na Stàitean Aonaichte WWW.FENDER.COM
• ©2026 Fender Musical Instruments Corporation. All Rights Reserved. The Fender logo (plain and stylized) Fender Studio, and Fender Studio Pro are trademarks of FMIC. Mac, macOS, iOS, and iPadOS are registered trademarks of Apple, Inc., in the U.S. and other countries. Windows is a registered trademark of Microsoft, Inc., in the U.S. and other countries. ASIO is a trademark and software of Steinberg Media Technologies GmbH. VST is a trademark of Steinberg Media Technologies GmbH.
  Faodaidh ainmean toraidh eile a tha air an ainmeachadh an seo a bhith nan comharran-malairt aig na companaidhean aca fhèin. Faodaidh gach sònrachadh atharrachadh gun rabhadh.

Ceistean Cumanta