Leabhar-làimhe Cleachdaiche Modúl EDGE EZX

EDGE EZX Module

Sònrachaidhean

• Co-fhreagarrachd carbaid: 2022.5+ Silverado/ Sierra 3.0L LM2/LZ0
• Seòrsa toraidh: Modúl Coileanaidh
• Dèanadair: Bathar Edge
• Required Mobile App: EZX Mobile App

Fiosrachadh toraidh

EZX Mobile App

Stiùireadh luchdachadh sìos

• This product requires a Mobile App to function correctly.
• To find the download link for your Smart Phone, please scan this QR Code, or visit the link below. You can also find other useful information and instructions about the EZX on our weblàrach.
• https://www.edgeproducts.com/products/in-line_chips_and_modules/ezx/

Rabhadh & rabhadh sàbhailteachd

• Tron Leabhar-làimhe Cleachdaiche seo chì thu teachdaireachdan cudromach a thaobh do shàbhailteachd no dìon a’ charbaid agad. Tha na teachdaireachdan seo air an comharrachadh leis na faclan RABHADH, CAUTION, no FIOSRACHADH.

RABHADH

• Tha RABHADH a’ nochdadh suidheachadh cunnartach a thig gu bàs no droch leòn mura tèid a sheachnadh.

CUAIRT

• Tha Rabhadh a’ nochdadh suidheachadh cunnartach a dh’ fhaodadh, mura tèid a sheachnadh, leòn beag no meadhanach adhbhrachadh.

FIOSRACHADH

• Tha NOTICE a ’nochdadh suidheachadh a dh’ fhaodadh milleadh a dhèanamh air an toradh no air do charbad.

NOTA

• Is e ceum no cuimhneachan a th’ ann an NOTA a tha cudromach a chuimhneachadh nuair a bhios tu a’ stàladh no a’ cleachdadh an toraidh.
• Tha an toradh a cheannaich thu na thoradh àrd-choileanaidh. Mar sin, tha cuid de chunnartan ann air am bu chòir dhut a bhith làn mhothachail. Na cleachd an toradh seo gus am bi thu air am fiosrachadh sàbhailteachd a leanas agus an Aonta Sealbhadair a leughadh gu faiceallach.
• WARNING: Prior to use, read the User Manual. Misuse of the device could result in traffic accidents, death or serious injury, and/or damage to your vehicle. HOLLEY IS NOT RESPONSIBLE FOR AND SHALL HAVE NO LIABILITY TO YOU FOR ANY CLAIMS ARISING OUT OF OR RELATING TO ANY MISAPPLICATION OF THE DEVICE, CUSTOM TUNES, IMPROPER USE OF CALIBRATIONS, MALFUNCTION OR LACK OF LEGAL COMPLIANCE FOR CUSTOM PROGRAMS CREATED BY THIRD PARTIES.

Stiùireadh Sàbhailteachd

RABHADH
Before using device, read and understand the user manual, including these additional safety instructions. Failure to do so could result in  DEATH or SERIOUS INJURY.

• Na bi nas àirde na crìochan astair laghail air rathaidean poblach. Tha a bhith a ’briseadh laghan trafaic cunnartach agus dh’ fhaodadh e dochann no milleadh carbaid no an dà chuid adhbhrachadh.
• Cleachd comasan astar leasaichte sam bith den toradh seo a-mhàin ann an cuairteachadh dùinte, àrainneachdan rèisidh le cead laghail gu sònraichte airson an adhbhair seo. Tha a bhith a ’briseadh laghan trafaic cunnartach agus dh’ fhaodadh e dochann no milleadh carbaid no an dà chuid adhbhrachadh.
• Na bi ag obrachadh an inneal fhad ‘s a tha thu a’ dràibheadh. Dh ’fhaodadh dràibheadh ​​gun dragh a bhith a’ leantainn gu tubaistean trafaic, bàs no droch leòn, agus / no milleadh air do charbad.
• Dèan an-còmhnaidh atharrachaidhean no atharrachaidhean fhad 'sa tha thu a' stad. Faodaidh atharrachadh suidheachadh fhad ‘s a tha thu a’ dràibheadh ​​bacadh a chuir air d ’aire gu suidheachadh an rathaid agus dh’ fhaodadh e dochann no milleadh carbaid no an dà chuid adhbhrachadh.
• Na cruaich toraidhean. Faodaidh innealan àrdachadh coileanaidh “cruachadh” no stàladh neo-iomchaidh eile fàilligeadh air trèan cumhachd air an rathad. Faodaidh feartan eile a bhith aig feartan nach eil co-chòrdail ris an inneal agad. Lean a h-uile stiùireadh stàlaidh is obrachaidh.
• Faodaidh cuid de dh ’atharrachaidhean buaidh a thoirt air pàirtean eile den charbad agad. Airson example, ma bheir thu air falbh / atharraich an cuingealachadh astair anns a ’charbad agad, bi cinnteach gum bi na taidhrichean agus na co-phàirtean eile agad air an luachadh airson na h-astaran nas motha a dh’ fheumas iad a sheasamh. Mura dèan thu sin faodaidh tu smachd a chumail air carbaid. Atharraich an cuingealachadh astair a-mhàin airson a chleachdadh ann an àrainneachdan dùinte dùinte, le cead laghail, chan ann airson an cleachdadh air rathaidean poblach.

NOTA:

• Tha na stiogairean ann an cuid de thoraidhean a’ buntainn ri toraidhean a tha air saoradh CARB fhaighinn airson gèilleadh sgaoilidhean.
• Faodaidh an toradh seo coinneachadh ri riatanasan gèilleadh sgaoilidhean Bòrd Goireasan Adhair California agus Buidheann Dìon Àrainneachd Feadarail. Ma tha, tha e laghail a bhith air a reic agus air a chleachdadh air carbadan fo smachd truailleadh air an ruith air sràidean poblach agus mòr-rathaidean. Feumar an inneal a chuir a-steach agus obrachadh a rèir an stiùiridh a tha air a thoirt seachad san leabhar-làimhe cleachdaiche seo. Air a ghabhail a-steach leis na toraidhean gèillidh sin tha stiogair airson a chumail sa chàr agad. Faodaidh tu an dàrna cuid a chumail an àiteigin air a’ chàr (me, ceann a-staigh doras an draibhear) no dìreach a stòradh sa bhogsa mhiotagan agad. Is e adhbhar nan stiogairean sin innse do dhuine sam bith aig a bheil ceistean a thaobh cleachdadh an toraidh seo agus mar a bheir e buaidh air sgaoilidhean. Airson example, bhiodh e rudeigin a bhith a ’sealltainn do theicneòlas sgaoilidh ma thèid a cheasnachadh nuair a bheir thu do charbad a-steach airson sgrùdadh sgaoilidhean gus innse dha / dhi gu bheil an toradh a’ gèilleadh ri sgaoilidhean CARB.

FCC & Industry Canada Compliance

MODEL: Parallax FCC ID: 2AA9B05 IC: 12208A-05

• Tha an inneal seo a’ cumail ri Pàirt 15 de Riaghailtean FCC. Tha gnìomhachd an urra ris an dà chumha a leanas: (1) Is dòcha nach adhbhraich an inneal seo bacadh cronail, agus (2) feumaidh an inneal seo gabhail ri bacadh sam bith a gheibhear, a’ toirt a-steach bacadh a dh’ fhaodadh obrachadh neo-mhiannach adhbhrachadh.

Stàladh

Installation of EZX Silverado/Sierra 20-22 3.0L Materials

Innealan riatanach

• 10mm, 8mm, 7mm Socket/Wrench Pick Tool

EZX Installation

Recommended Harness Routing:

• STEP 1 – Disconnect negative terminal on the battery, this is to prevent getting trouble codes from disconnecting sensors.
• STEP 2 – Loosen the 10mm bolt holding down the engine cover and remove the oil fill cap. Then pull up and out towards the front of the vehicle. Temporarily replace the cap to prevent anything from going into the engine during install.
• STEP 3 – Disconnect the MAF (Mas Air Flow) Sensor from the intake box. Pull the red locking tab out then depress the release tab to disconnect the connector.
• STEP 4 – Loosen both hose clamps holding the intake elbow on with a 7mm socket and wrench. Remove intake elbow and set aside.
• WARNING: The MAP and MAF connectors appear identical. The harness will have labels for each connector location. In the case that these labels are not visible/present, the shorter harness will be for the MAF and the longer harness will be for MAP. Connecting these wrong will cause a check engine light and drivability issues.
• STEP 5 – Remove the 10mm bolt holding the coolant reservoir. This will allow more movement/working area behind the coolant reservoir.
• STEP 6 – Remove the reservoir off of the two studs holding it onto the firewall. This will give us access to the MAP sensor.
• STEP 7a – Please move onto step 7B if you have an LZ0 engine. If you have the LM2 engine with the refreshed interior, you will need to use the included MAP sensor adapters. Plug in the MAP sensor adapters to both ends of the EZX MAP harness.
• STEP 7b – Disconnect the MAP (Manifold Absolute Pressure) Sensor by sliding the grey locking tab out ward then depress that same locking tab to disconnect the harness from the sensor. Then connect the EZX harness into both ends. Route the MAP sensor underneath the coolant reservoir anvd reinstall the reservoir back into place.
• REMINDER: The MAP and MAF connectors are identical. Refer back to page 10 for more details.
• STEP 8 – Disconnect the FRP (Fuel Rail Pressure) Sensor by sliding the grey locking tab outward then depress that same locking tab to disconnect the harness from the sensor. Then connect the EZX harness into both ends.
• STEP 9 – Reassemble the intake elbow, engine air filter, and intake lid while making sure to route the EZX harness under the intake elbow. Connect both ends of the EZX harness to the MAF harness and MAF sensor.
• STEP 10 – Locate the ECM connector located in front of the intake box, then disconnect the harness. Connect the EZX ECM connection to both sides of the vehicle harness.
• Note: To disconnect the ECM connector, pull the red locking tab up. Then, locate the release tab on the bottom corner of the connector. Once depressed, the connector can slide upward towards the red locking tab. The connector should pull apart.
• STEP 11 – Connect the EZX module to the harness and route the rest of the EZX harness around the intake box. Secure the harness and module using the provided zip-ties as seen in the image below.
• STEP 12 – Reconnect the negative terminal on the battery.

www.EDGEPRODUCTS.com
Edge Products is a brand of Holley Tuning Group

• Airson ceistean a bharrachd nach lorgar san stiùireadh cleachdaiche, cuir fòn gu:
• Taic Teicnigeach Holley: (888)-360-3343
• Mon – Fri 8:00 am – 5:00 pm MST
• Gus do ghairm taic a luathachadh, feuch gum bi am fiosrachadh carbaid agad, an àireamh pàirt agus an àireamh sreathach deiseil mus cuir thu fios gu Taic Teicnigeach.

Ceistean Cumanta