1Mii ML100 Bluetooth 5.0 Audio Receiver User Manual

Ro-ràdh

The 1Mii ML100 Bluetooth 5.0 Audio Receiver is designed to bring wireless convenience to your audio experience. This compact and powerful device allows you to stream audio wirelessly from your Bluetooth-enabled devices to non-Bluetooth audio systems, such as car stereos, home audio systems, and wired headphones. With its advanced Bluetooth 5.0 technology, built-in microphone for hands-free calls, and long battery life, the ML100 enhances your listening and communication on the go.

Susbaint pacaid

• 1 x 1Mii ML100 Bluetooth Receiver
• 1 x càball cosgais USB
• Càball claisneachd 1 x 3.5mm
• 1 x 3.5mm Metal Adapter
• 1 x Leabhar-làimhe Cleachdaiche

Image: All items included in the 1Mii ML100 package.

Bathar seachadview agus Smachdan

Image: Detailed diagram of the ML100 device with labeled components.

Prìomh cho-phàirtean:

• Jack claisneachd 3.5mm: For connecting to non-Bluetooth audio devices.
• Play/Pause/Bluetooth Pairing Button: Multi-function button for media control and pairing.
• Comharra LED: Provides status feedback (pairing, connected, charging).
• Volume + / Previous Button: Adjust volume up, or skip to previous track.
• Volume - / Next Button: Adjust volume down, or skip to next track.
• Tionndadh cumhachd air / dheth: Gus an inneal a thionndadh air no dheth.
• Port cosgais: Port USB Seòrsa-C airson cosgais.
• Mic: Micreofon togte airson gairm gun làmhan.

Suidheachadh agus obrachadh

1. A 'cur cosgais air an inneal

Before first use, fully charge the ML100. Connect the provided USB charging cable to the charging port on the device and a USB power source (e.g., computer, USB wall adapter). The LED indicator will show charging status. A full charge takes approximately 1.5 hours and provides up to 14 hours of playback.

2. A ’toirt cumhachd air / dheth

• Cumhachd air: Slide the Power On/Off switch to the "ON" position. The LED indicator will light up.
• Cumhachd dheth: Slide the Power On/Off switch to the "OFF" position. The LED indicator will turn off.

3. A 'càradh le inneal Bluetooth

1. Ensure the ML100 is powered on.
2. The device will automatically enter pairing mode (LED indicator will flash). If not, press and hold the Play/Pause/Bluetooth Pairing button for 2 seconds to enter pairing mode.
3. On your Bluetooth-enabled device (smartphone, tablet, etc.), go to Bluetooth settings and search for "ML100".
4. Select "ML100" to connect. The LED indicator will turn solid blue once successfully paired.

Image: Visual guide for powering on, plugging in, pairing, and playing music.

4. A’ ceangal ri uidheam claisneachd

Use the provided 3.5mm audio cable or metal adapter to connect the ML100 to your desired audio system (car AUX port, home stereo, wired headphones, etc.).

Ìomhaigh: Examples of connecting the ML100 to various non-Bluetooth devices.

Image: Comprehensive compatibility diagram for the ML100.

5. Ceangal Dùbailte

The ML100 supports connecting to two Bluetooth devices simultaneously. After pairing the first device, put the ML100 back into pairing mode and connect the second device. This allows for easy switching between audio sources and managing calls from either device.

Image: Dual connection feature of the ML100.

6. Using the Receiver (Control Table)

Sònrachaidhean

Fuasgladh thrioblaidean

• An uidheam nach eil a' cur cumhachd air: Ensure the battery is charged. Connect to a power source using the USB charging cable.
• Chan urrainnear paidhir a dhèanamh le inneal Bluetooth:
  1. Ensure the ML100 is in pairing mode (LED flashing).
  2. Make sure Bluetooth is enabled on your source device and it's within range.
  3. Try clearing the pairing list on the ML100 by pressing and holding both Volume + and Volume - buttons for 5 seconds.
  4. Restart both the ML100 and your source device.
• Gun toradh claisneachd:
  1. Check if the ML100 is successfully paired and connected to your audio system via the 3.5mm jack.
  2. Ensure the volume on both the ML100 and your audio system is turned up.
  3. Verify that the correct input source is selected on your audio system.
• Droch chàileachd claisneachd no dì-cheangal:
  1. Ensure there are no obstructions between the ML100 and your Bluetooth source device.
  2. Move closer to the source device to reduce interference.
  3. Thoir sùil airson innealan gun uèir eile a dh’ fhaodadh a bhith ag adhbhrachadh bacadh.
  4. Ensure the ML100 is fully charged.
• Does not support LDAC codec: The 1Mii ML100 supports AAC but does not support Apt-x or LDAC codecs. If your source device uses these codecs, it will default to a supported codec like SBC or AAC.

Cumail suas

• Keep the device dry; do not expose it to moisture or extreme temperatures.
• Glan an inneal le clò bog, tioram. Na cleachd ceimigean cruaidh no innealan-glanaidh sgrìobach.
• Stòraich an inneal ann an àite fionnar, tioram nuair nach eilear ga chleachdadh airson ùine mhòr.
• Seachain a bhith a’ leigeil às no fo smachd an inneal gu buaidhean làidir.

Molaidhean cleachdaiche

• For optimal sound quality, ensure your audio source device is also using a high-quality audio output.
• When using in a car, consider plugging the ML100 into a USB car charger for continuous power, especially on long drives, as it can be used while charging.
• Utilize the dual connection feature to seamlessly switch between your phone for calls and a tablet for music during travel.
• If experiencing any lag or connection issues, try resetting the device by clearing the pairing list and re-pairing.

Barantas agus Taic

This product comes with a 1-year warranty from the date of purchase. For any technical support or warranty claims, please contact the 1Mii Official Store directly. Please retain your proof of purchase for warranty validation.