EvoFox Blaze 2 Wireless Gaming Mouse User Manual

Ro-ràdh

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your EvoFox Blaze 2 Wireless Gaming Mouse. Please read this guide thoroughly to ensure optimal performance and longevity of your device.

Image: The EvoFox Blaze 2 Wireless Gaming Mouse, showcasing a dhealbhadh.

Susbaint pacaid

Dèan cinnteach gu bheil a h-uile nì anns a’ phacaid:

• 1 × EvoFox Blaze 2 Tri Mode RGB Programmable Wireless Gaming Mouse
• 1 × Nano Receiver (for 2.4GHz wireless connectivity)
• 1 × Type-C Braided Charging Cable with EMI Ring (1.5m)
• 1 × Leabhar-làimhe Cleachdaiche (an sgrìobhainn seo)
• 1 × Warranty & Registration Flyer

Suidhich

A luchdadh a-nuas an luchag

Before initial use, fully charge the mouse using the provided Type-C braided charging cable. Connect the Type-C end to the mouse and the USB-A end to a powered USB port on your computer or a USB wall adapter.

Image: The EvoFox Blaze 2 mouse connected via its Type-C charging cable.

Modhan ceangail

The EvoFox Blaze 2 supports three connectivity modes:

1. Modh Wired: Connect the mouse directly to your computer using the Type-C cable. This mode offers the lowest latency (<1ms) and charges the mouse simultaneously.
2. Modh gun uèir 2.4GHz:
   • Insert the Nano Receiver into an available USB port on your computer.
   • Ensure the mouse is switched to 2.4GHz mode (usually indicated by a switch on the bottom of the mouse).
   • The mouse should connect automatically. This mode offers ultra-low latency (<20ms).
3. Dual Bluetooth Mode (BTx2):
   • Switch the mouse to one of the Bluetooth modes (BT1 or BT2) using the switch on the bottom.
   • On your computer or device, search for Bluetooth devices and select "EvoFox Blaze 2" to pair.
   • You can pair with two different Bluetooth devices and switch between them. This mode offers low latency (<70ms).

Image: Diagram illustrating the three connectivity modes: Wired (Type-C), 2.4GHz Wireless (USB dongle), and Bluetooth (BTx2).

Stàladh bathar-bog

For full customization of DPI, polling rate, RGB lighting, and button mapping, download and install the dedicated EvoFox Blaze 2 software from the official EvoFox website. The software is required to unlock the mouse's full potential.

Thoir an aire: The software detects the mouse only when connected via wired or 2.4GHz USB mode.

Obrachaidh

Atharrachadh DPI

The EvoFox Blaze 2 features an Instant S205 optical sensor with up to 12,800 DPI. You can cycle through preset DPI levels using the dedicated DPI buttons on the mouse. For fine-tuning and setting up to 6 custom DPI levels, use the comprehensive software.

Image: Visual representation of the 12,800 DPI sensor, polling rate, acceleration, FPS, and IPS specifications.

Ìre bhòtaidh

The mouse supports a 1000Hz polling rate, ensuring rapid response times. The polling rate can be adjusted via the software for specific needs.

Putanan prògramaichte

The mouse is equipped with 8 programmable buttons, including a dedicated fire button. Use the software to assign custom functions, macros, and key combinations to these buttons for enhanced in-game control and productivity.

Image: Close-up of the EvoFox Blaze 2 mouse highlighting the 8 programmable buttons, including the fire button.

Solais RGB

The EvoFox Blaze 2 features customizable RGB lighting. Adjust lighting effects, colors, and brightness through the dedicated software to match your setup or mood.

Ìomhaigh: Mion-fhiosrachadh view of the RGB lighting zones on the EvoFox Blaze 2 mouse.

Gnàthachadh bathar-bog

The comprehensive software allows you to:

• Customize DPI levels and sensitivity.
• Adjust polling rate.
• Program all 8 buttons.
• Create and edit macros.
• Customize RGB lighting effects.
• Save multiple user profiles directly to the mouse's onboard memory.

Image: Screenshot of the EvoFox Blaze 2 customization software interface, showing options for button mapping, DPI, and performance settings.

Cumail suas

Riaghladh Bataraidh

The EvoFox Blaze 2 is equipped with a 500mAh rechargeable battery. To maximize battery life:

• Cuir cosgais air an luchag nuair a sheallas comharra a’ bhataraidh cumhachd ìosal.
• Utilize the smart power-saving features:
  • Modh leisg: Activates after 1 minute of no movement.
  • Modh cadail domhainn: Activates after 10 minutes of inactivity.
• These timers can be customized through the software.

Image: Illustration of the mouse's power-saving modes: Idle Mode and Deep Sleep Mode.

Glanadh

Wipe the mouse with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the surface or internal components.

Fuasgladh thrioblaidean

• Chan eil an luchag a’ freagairt:
  • Dèan cinnteach gu bheil an luchag air a luchdadh.
  • Check the connectivity mode switch (Wired, 2.4GHz, BT1, BT2) on the bottom of the mouse.
  • For 2.4GHz mode, ensure the Nano Receiver is securely plugged into a USB port.
  • For Bluetooth mode, ensure the mouse is paired correctly with your device.
  • Try connecting the mouse in wired mode to confirm functionality.
• Bathar-bog nach eil a’ lorg luchag:
  • The software only detects the mouse when connected via wired or 2.4GHz USB mode. Ensure you are using one of these modes.
  • Ath-thòisich am bathar-bog agus/no do choimpiutair.
• Ceangal eadar-amail:
  • Ensure there are no strong interference sources (e.g., other wireless devices, large metal objects) near the mouse or receiver.
  • For 2.4GHz, try plugging the Nano Receiver into a different USB port, preferably a front-facing one if using a desktop.
  • Dèan cinnteach gu bheil bataraidh na luchaige air a luchdadh gu leòr.
• Cùisean solais RGB:
  • Ensure the software is installed and running, and check RGB settings.
  • Some lighting modes may consume more battery; ensure the mouse is charged.

Sònrachaidhean

Ìomhaigh: Tharview of the mouse's durable and ergonomic build, highlighting features like detachable cable, switch life, programmable buttons, and lightweight design.

Barantas agus Taic

Your EvoFox Blaze 2 Wireless Gaming Mouse comes with a warranty. Please refer to the included Warranty & Registration Flyer for detailed information regarding warranty terms, conditions, and registration procedures.

For technical support or service inquiries, please contact EvoFox customer support. Contact details can typically be found on the official EvoFox weblàrach no taobh a-staigh sgrìobhainnean a’ bharantais.

Dèanadair: Leictreonaic is Magnetachd Co-cheangailte Earranta

Neach-in-mhalairt/Pacaidh: Allied Electronics & Magnetics Private Limited C-64/4, Okhla Phase - 2, New Delhi - 110020