GOOLOO A5 and A3 Jump Starter with Air Compressor Instruction Manual

1. Toradh thallview

The GOOLOO A5 and A3 Jump Starter with Air Compressor are versatile 4-in-1 devices designed for automotive emergencies and daily convenience. They combine a powerful jump starter, a high-capacity tire inflator, a robust power bank, and a bright LED light into a single, portable unit. These devices are engineered for reliability and ease of use in various conditions.

2. Fiosrachadh Sàbhailteachd

Your GOOLOO Jump Starter is equipped with 10 smart safety protections to ensure safe operation. Always read and understand all safety instructions before use.

• Dìon thar-chìsean: A’ cur casg air milleadh bataraidh bho cus cosgais.
• Dìon thar-làthaireach: Dìon an aghaidh cus sruth-sruth.
• Dìon cuairt ghoirid: Bidh e a’ dùnadh dheth gu fèin-ghluasadach ma bhios cuairt ghoirid ann.
• Dìon polaidheachd cùil: Alerts and prevents damage from incorrect clamp ceangal.
• Dìon Bathar-bog AI: Intelligent software monitors and manages device performance.
• High and Low Temperature Protection: Operates safely within a wide temperature range (-4°F to 140°F).
• Spark-Proof Protection: Designed to prevent sparks during connection.
• Thar-Voltage Dìon: A’ dìon an aghaidh voltage ag èirigh.
• Dìon Overload: Prevents damage from excessive load.
• Dìon Cosgais Air Ais: Prevents current from flowing back into the jump starter.

Earalas Sàbhailteachd Coitcheann:

• Na cuir a-steach an inneal ann an uisge.
• Na cuir às don inneal.
• Cùm a-mach à ruigsinn chloinne.
• Use only specified accessories and chargers.

3. Pasgan-susbaint

Dèan cinnteach gu bheil a h-uile nì an làthair nuair a dh’fhosglas tu am bogsa:

• GOOLOO A5/A3 Jump Starter Unit
• Càbaill geansaidh glic
• Hose Adhair
• Various Nozzle Adapters (for balls, bicycles, etc.)
• Càball cosgais USB-C
• Cùis Giùlain
• Leabhar-làimhe cleachdaiche

4. Feartan toraidh

4.1. Jump Starter Function

The GOOLOO A5 delivers up to 4000A peak current, capable of restarting most 12V vehicles (up to all gas / 10.0L diesel engines). The A3 model provides 3000A peak current for up to all gas / 9.0L diesel engines. Both models feature a BOOST function for deeply discharged or near-dead batteries. Operating temperature range is -4°F to 140°F.

Image: The GOOLOO A5 Jump Starter connected to a car battery, demonstrating the jump-starting capability. The unit displays battery status and current readings.

4.2. Tire Inflator Function

Equipped with a high-efficiency motor, the A5 can inflate tires up to 160 PSI, featuring a 25mm cylinder for faster inflation. The A3 inflates up to 150 PSI. It can inflate a 285/70 R17 pickup tire from 30 PSI to 36 PSI in approximately 2 minutes (A5), or a 195/65 R15 sedan tire from 30 PSI to 36 PSI in 30 seconds (A5). Suitable for full-size pickups, light trucks, SUVs, cars, motorcycles, and bicycles, as well as balls and small inflatables.

Image: The GOOLOO A5 Jump Starter connected to a large vehicle tire, actively inflating it. The display shows the PSI reading and battery level.

4.3. Gnìomh a’ Bhanca Cumhachd

The unit features a 20,000mAh rated capacity. The A5 includes a built-in 45W USB-C output cable for charging devices like phones and tablets. One full charge supports up to 50 engine starts, 50 minutes of continuous inflation, or multiple device top-ups.

Image: The GOOLOO A5 Jump Starter charging a smartphone using its integrated 45W USB-C cable. The device's display is visible.

4.4. LED Light Function

A 400-lumen LED flashlight provides illumination with multiple modes: steady lighting, strobe, and SOS. The light can operate for up to 99 hours depending on the mode.

Image: The GOOLOO A5 Jump Starter's 400-lumen LED flashlight is shown illuminating a tire in a dark setting, highlighting its utility as a work light or emergency signal.

4.5. Sunlight-Readable Display

The device features a color LED display with a rotating status ring, offering 2000-nit brightness for clear readability even in direct sunlight. It tracks inflation in real-time.

Image: The GOOLOO A5 Jump Starter's display showing a 20,000mAh battery capacity and various usage statistics like engine starts, tire charges, phone charges, and lighting hours.

5. Suidhich

5.1. A 'cur cosgais air an inneal

Before first use, fully charge your GOOLOO Jump Starter. Connect the provided USB-C charging cable to the device's input port and to a suitable USB power adapter (not included). The display will indicate charging progress. A full charge supports numerous operations.

6. Stiùireadh Obrachaidh

6.1. Tòiseachadh Carbaid

1. Ensure the jump starter unit is sufficiently charged.
2. Plug the smart jumper cables into the jump starter's dedicated port.
3. Ceangail an dearg (+) clamp gu ceann-uidhe adhartach bataraidh a’ charbaid.
4. Ceangail an dubh (-) clamp to the vehicle's negative battery terminal.
5. Check the indicator lights on the smart jumper cables for a correct connection (usually a solid green light). If the battery is extremely low, press the 'BOOST' button on the jumper cable adapter for an extra surge.
6. Tòisich einnsean a’ charbaid.
7. Once the vehicle starts, immediately remove the jumper cables from the vehicle battery, then disconnect them from the jump starter unit.

Image: The GOOLOO A3 Jump Starter connected to a car battery in an engine bay, illustrating the proper setup for jump-starting a vehicle.

6.2. Inflating Tires

1. Connect the air hose to the jump starter's air output port.
2. Attach the air hose nozzle securely to the tire's valve stem.
3. Turn on the jump starter unit. The display will show the current tire pressure.
4. Use the mode button to select the desired pressure unit (PSI, BAR, KPA).
5. Use the '+' and '-' buttons to set your target tire pressure.
6. Press the start button to begin inflation. The unit will automatically stop once the target pressure is reached.
7. Disconnect the air hose from the tire valve and the jump starter.

Image: The GOOLOO A3 Jump Starter actively inflating a tire, with the digital display showing the current pressure.

6.3. A’ cleachdadh mar bhanca cumhachd

1. Connect your electronic device (smartphone, tablet, etc.) to the USB-A or USB-C output ports on the jump starter using an appropriate charging cable.
2. Tòisichidh an inneal a’ cur cosgais air gu fèin-ghluasadach.

6.4. A’ cleachdadh an t-solais LED

1. Press and hold the light button (usually integrated with the power button) for 2-3 seconds to turn on the steady LED light.
2. Press the light button again to cycle through strobe mode.
3. Press the light button a third time for SOS mode.
4. Press the light button a fourth time to turn off the light.

Image: The GOOLOO A3 Jump Starter's LED flashlight is shown illuminating a dark outdoor area, demonstrating its utility for visibility and emergencies.

7. Cumail suas

• Cùm an inneal glan agus saor bho dhuslach is sprùilleach.
• Stòraich an aonad ann an àite fionnar, tioram air falbh bho sholas dìreach na grèine agus teòthachd anabarrach.
• Recharge the jump starter every 3-6 months, even if not in use, to maintain battery health.

8. A ’dèanamh trioblaid

• Inneal nach eil a’ tionndadh air: Ensure the device is charged. If fully charged, contact support.
• Carbad gun tòiseachadh: Check that jumper cables are correctly connected (red to +, black to -). Ensure the jump starter is fully charged. If the battery is deeply discharged, use the BOOST function.
• Tire not inflating: Check that the air hose is securely connected to both the unit and the tire valve. Ensure the target pressure is set correctly.
• Dìon cus teasachaidh air a ghnìomhachadh: If the device becomes too hot during prolonged use (e.g., multiple jump starts or extended inflation), it may enter overheat protection mode. Allow the unit to cool down before resuming operation.

9. Sònrachaidhean

10. Barantas agus Taic

For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product's packaging or visit the official GOOLOO weblàrach.