DURATECH 20V 18GA Cordless Brad Nailer and Staple Gun Instruction Manual

1. Fiosrachadh Sàbhailteachd

WARNING: Always read and understand all safety warnings and instructions before operating this tool. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Cleachd goggles sàbhailteachd no glainneachan sàbhailteachd an-còmhnaidh le sgiathan taobh agus, mar a dh’ fheumar, sgiath aghaidh iomlan nuair a bhios tu ag obrachadh an toraidh seo.
• To avoid accidental firing, keep fingers AWAY from triggers when not driving fasteners.
• Do not alter or remove triggers.
• NEVER point the tool at yourself or others in the work area when connecting the battery and when using or handling the tool. Failure to follow warnings could result in DEATH or SERIOUS INJURY.
• To avoid battery over-discharge and potential damage, recharge the device at least once every three months.

2. Toradh thallview

Susbaint pacaid

• Brad Nailer gun sreang
• 1000pcs 1-1/4" Staples
• 1000pcs 1-9/16" Nails
• 2.0Ah Bataraidh Li-ion
• Charger luath 1-uair
• Cùis Giùlain
• Leabhar-làimhe stiùiridh

Co-phàirtean inneal

Figure 1: Labeled components of the DURATECH 20V 18GA Cordless Brad Nailer.

Meudan agus cuideam

Figure 2: Physical dimensions and weight of the nailer (without battery).

• Fad: 10.83 òirleach (27.5 cm)
• Leud: 9.45 òirleach (24 cm)
• Weight: 6.19 lbs (without battery)

3. Suidhich

Stàladh bataraidh

1. Ensure the battery is fully charged using the provided 1-hour quick charger.
2. Cuir am bataraidh còmhla ris an t-slot bataraidh air an inneal.
3. Sleamhnaich am bataraidh a-steach don t-slot gus an cliog e gu tèarainte na àite.

Loading Fasteners (Nails/Staples)

Figure 3: Steps for inserting staples or nails into the magazine.

1. Brùth am putan fuasglaidh agus tarraing a-mach còmhdach na h-iris.
2. Tilt the tool and place nails/staples into the track of the magazine channel. Ensure the fastener points are placed against the bottom of the magazine.
3. Dùin còmhdach na h-iris gus an tèid e an sàs leis a’ phutan fuasglaidh.

Nail Viewer Uinneag

An t-ingne viewer window allows you to quickly check the fastener level. When the window shows dearg, it indicates the magazine is without nails. When it shows dubh, it indicates the magazine contains nails.

4. Stiùireadh Obrachaidh

Modhan losgadh

The nail gun features two firing modes: Single Firing Mode and Contact Firing Mode. Select the desired mode using the switch located near the LED indicator.

Figear 4: Suidse taghaidh modh losgaidh.

Modh losgaidh singilte

• Shift the mode switch to the taobh chlì (single firing icon).
• Depress the contact pin against the workpiece.
• Squeeze the trigger to fire a single fastener.

Cuir fios gu Modh Firing

• Shift the mode switch to the taobh deas (contact firing icon).
• Sguab às an inneal-brosnachaidh.
• Depress the contact pin against the workpiece to fire fasteners continuously as the tool is moved along the surface.

Thoir an aire: If the contact pin is not depressed against the workpiece before squeezing the trigger (in single firing mode) or if the trigger is not squeezed before depressing the contact pin (in contact firing mode), the nail gun will not shoot fasteners due to the safety protection device.

Atharrachadh Doimhneachd

Adjust the fastener driving depth using the depth adjustment wheel located near the contact pin. Turning the wheel allows you to set the desired depth for various materials and applications.

Figure 5: Depth adjustment wheel.

Solais LED

The tool is equipped with LED lights on both sides to illuminate the work area, which is particularly useful in low-light conditions. The LED lighting can be activated via the LED Lighting & Indicator Switch.

Figure 6: LED lighting for the work area.

Comharra LED

The LED indicator provides visual feedback on the tool's status:

Figure 7: LED indicator and its meanings.

• Dearg air: Bataraidh ìosal.
• A' lasadh dearg: Nails/staples are jammed.
• Uaine air: No nails/staples in the magazine.
• Flasadh uaine: Overheat.
• Solas dheth: Stàit obrachaidh àbhaisteach.

Bhidio Oifigeil Bathar

Video 1: This official video demonstrates the product's features, including loading fasteners, LED indicators, firing modes, and depth adjustment.

5. Cumail suas

Clearing Jammed Fasteners

If the LED indicator turns red and flashes, it signifies that nails/staples are jammed. Follow these steps to clear the jam:

Figure 8: Quick Release Mechanism.

1. Remove the battery from the tool to prevent accidental firing.
2. Open the magazine using the quick release mechanism.
3. Carefully remove any jammed nails or staples from the magazine channel. A small tool like a screwdriver may be used to assist, but ensure it does not damage the tool.
4. Close the magazine and reinsert the battery.

Cùram Bataraidh

• Always use the provided DURATECH 20V Li-ion battery and charger.
• Recharge the battery at least once every three months to prevent over-discharge and potential damage, even if not in use.
• Cùm am bataraidh ann an àite fionnar, tioram air falbh bho sholas dìreach agus teòthachd anabarrach.

6. A ’dèanamh trioblaid

Refer to the LED Indicator section (Section 4) for common issues and their corresponding indicator lights. If the issue persists after following the recommended steps (e.g., clearing jams, recharging battery), please contact customer support.

7. Sònrachaidhean

Ceanglaichean Co-chòrdail

Figure 9: Compatible nail and staple types.

8. Barantas agus Taic

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official DURATECH website. Ensure you have your model number (024009) and purchase details available when contacting support.