RGBlink NDI PTZ Camera Controller (RGBBKT) User Manual

1. Ro-ràdh

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of the RGBlink NDI PTZ Camera Controller (RGBBKT). This device is designed for professional video production environments, offering comprehensive control over various PTZ cameras using multiple protocols.

Image 1.1: RGBlink NDI PTZ Camera Controller (RGBBKT).

2. Suidhich

Follow these steps to set up your RGBlink NDI PTZ Camera Controller.

2.1 Fo-phacadh agus Sgrùdadh Tùsail

• Thoir air falbh na pàirtean gu lèir bhon phacaid gu faiceallach.
• Dèan cinnteach gu bheil a h-uile nì a tha air an liostadh air an liosta pacaidh an làthair.
• Inspect the controller for any signs of physical damage. If damage is found, contact your dealer immediately.

2.2 A’ ceangal an Rianadair

The RGBlink NDI PTZ Camera Controller supports various connection methods for power and camera control.

• Cumhachd thairis air Ethernet (PoE): Connect a single RJ45 Ethernet cable from a PoE-enabled network switch to the controller's LAN port. This provides both power and network connectivity.
• Adaptor Cumhachd Taobh a-muigh: If PoE is not available, connect the provided power adapter to the DC 12V input port and to a power outlet.
• Ceanglaichean camara:
  • Ethernet (IP Control): Connect PTZ cameras to the same network as the controller via RJ45 Ethernet cables. The controller supports VISCA over IP, ONVIF v2.42, and NDI v5.5 protocols.
  • Smachd Sreathach: For cameras supporting serial communication, use RS232, RS422, or RS485 interfaces. Connect the appropriate cables from the controller's serial ports to the cameras.

Image 2.1: Rear panel connections including RS-232, RS-422, LAN (PoE), and Power Input.

Ìomhaigh 2.2: Eisimpleirample connection diagram showing PTZ Controller, PoE Switch, PTZ Cameras, Audio Mixer, and Computer.

Image 2.3: Diagram illustrating IP camera connections via a network switch.

2.3 Rèiteachadh lìonra

For IP-based camera control, ensure the controller and cameras are on the same network segment. The controller supports automatic detection of NDI-enabled PTZ cameras.

• Access the controller's web eadar-aghaidh le bhith a’ cur a sheòladh IP a-steach a web browser. (Refer to the device's display or network tools to find the IP address).
• The default login credentials are typically 'admin' with a blank password. It is recommended to set a strong password immediately.
• Taobh a-staigh an web interface, configure camera protocols (e.g., ONVIF, VISCA over IP) and enter camera-specific user credentials if required.

Image 2.4: NDI|HX camera search and control interface on the controller.

3. Obrachadh

This section details the operational functions of the RGBlink NDI PTZ Camera Controller.

3.1 Os cionnview de smachdan

The controller features a 3.49" LCD display, a 3D joystick, various knobs, and a numeric keypad for intuitive control.

Image 3.1: The controller's 3.49-inch LCD display.

Ìomhaigh 3.2: Mion-fhiosrachadh view of the 3D joystick and multi-function knobs.

Image 3.3: Layout of the controller's buttons and numeric keypad area.

3.2 Taghadh Camara

• Quick Select Buttons: Use the dedicated CAM 1-5 buttons for quick selection of up to 5 cameras.
• Meur-chlàr àireamhach: For cameras beyond the quick select buttons (up to 255), press the ID CAM button, then enter the camera number using the numeric keypad, and press A steach.

Image 3.4: The controller's ability to manage multiple cameras.

3.3 Smachd PTZ

• Joysticks: The 3D joystick controls pan (left/right), tilt (up/down), and zoom (rotate the joystick).
• Knob Luas PT: Adjusts the gimbal movement speed for pan and tilt.
• Zoom Knob: Provides precise zoom control, especially useful in preview modh.

3.4 Image Parameter Adjustment

• IRIS/SHUTTER Knob: Rotate to adjust aperture and shutter speed. Press to switch control modes.
• R/B GAIN Knob: Rotate to adjust red and blue gain. Press to switch control modes.
• FOCUS Button: Brùth an FOCUS AUTO button to switch the camera to auto focus mode.
• EXPOSURE Button: Cycles through exposure modes (Aperture Priority, Shutter Priority, Gain Priority, Manual Exposure, Auto Exposure).
• BACKLIGHT Button: Toggles the camera's backlight mode.
• WHITE BALANCE CYCLE Button: Cycles through white balance modes (Indoor, Outdoor, Manual, Auto).
• ONE PUSH TRIGGER Button: When white balance is set to "One-Push White Balance", press this button to initiate a one-push white balance calibration.

Image 3.5: Functions of buttons and knobs on the left side of the controller.

Image 3.6: Functions of buttons and knobs on the right side of the controller, including preset controls.

3.5 ro-shuidhichte

• SET PRESET Button: Press to enter preset position mode. Use the numeric keys to enter the preset number (0-9) and press A steach a shàbhaladh. Brùth ESC a mach.
• CALL PRESET Button: Press to enter preset recall mode. Use the numeric keys to enter the preset number (0-9) and press A steach to recall. Press ESC a mach.
• The controller supports saving and recalling up to 255 presets per camera.

3.6 Stiùireadh Clàr

• Putan MENU: Press to open or close the camera settings menu. In menu control mode, the joystick controls navigation (up, down, left, right), A steach confirms selections, and ESC acts as a back button.

4. Cumail suas

Proper maintenance ensures the longevity and optimal performance of your RGBlink NDI PTZ Camera Controller.

4.1 Glanadh

• Use a soft, dry cloth to clean the exterior of the controller.
• Airson salachar stòlda, beagan dampen the cloth with water or a mild, non-abrasive cleaning solution.
• Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the surface and display.
• Ensure no liquids enter the device through openings or ports.

4.2 Stòradh

• Nuair nach eilear ga chleachdadh airson ùine mhòr, stòraich an rianadair ann an àite fionnar, tioram air falbh bho sholas dìreach na grèine agus teòthachd anabarrach.
• Dìon an inneal bho duslach agus taiseachd.

5. A ’dèanamh trioblaid

Tha an earrann seo a’ toirt seachad fuasglaidhean air cùisean cumanta a dh’ fhaodadh tu a thighinn tarsainn orra.

5.1 Gun chumhachd

• Thoir sùil air Stòr Cumhachd: Ensure the power adapter is securely connected to both the controller and a working power outlet.
• PoE Check: If using PoE, verify that the Ethernet cable is connected to a PoE-enabled port on your network switch and that the switch is powered on.
• Ionracas càball: Inspect the power cable and Ethernet cable for any damage.

5.2 Cannot Control Camera

• Ceangal lìonra: For IP cameras, ensure the controller and cameras are on the same network and can communicate. Check network cables and IP addresses.
• Mì-chothromachadh protocol: Verify that the correct control protocol (e.g., VISCA over IP, ONVIF, NDI, Pelco-D/P) is selected on both the controller and the camera.
• ID a ’chamara: Ensure the correct camera ID is selected on the controller.
• Teisteanasan Log a-steach: If the camera requires authentication, confirm that the correct username and password are configured in the controller's web eadar-aghaidh.
• Ceangal sreathach: For serial control, check RS232/RS422/RS485 cable connections and ensure baud rates and addresses match between the controller and camera.
• Firmware: Ensure both the controller and cameras have the latest firmware installed. Visit the RGBlink support weblàrach airson ùrachaidhean.

5.3 LCD Display Issues

• Gun taisbeanadh: Dèan cinnteach gu bheil an rianadair air a chumhachdachadh.
• Taisbeanadh Dim: Check if there are any brightness settings on the controller that can be adjusted.

6. Sònrachaidhean

Image 6.1: Controller dimensions and typical usage environments.

Image 6.2: Visual representation of supported protocols including RJ45, RS485, RS422, RS232, ONVIF, NDI, Pelco-D, Pelco-P, and Visca.

7. Taisbeanadh Bhidio Bathar

Watch the official product video for a visual demonstration of the RGBlink NDI PTZ Camera Controller's features and operation.

8. Barantas agus Taic

For warranty information, technical support, or service inquiries, please contact RGBlink customer service or visit their official weblàrach.

• Dèanadair: Co. Saidheans is Teicneòlais Xiamen RGBlink, Earr.
• Oifigeil Weblàrach: www.rgblink.com (Nota: Is e seo àite-glèidhidh URL, thoir sùil air pasgan an toraidh agad no air sgrìobhainnean oifigeil airson an taic cheart weblàrach.)
• Fiosrachadh conaltraidh: Refer to the RGBlink official website for the most current contact details for technical support and warranty claims.