Junsun 2G+64G Car Stereo Radio for Dodge Ram 1500 2500 3500 (2013-2019) - Instruction Manual

Ro-ràdh

Thank you for choosing the Junsun 2G+64G Car Stereo Radio. This manual provides essential information for the proper installation, operation, and maintenance of your new car stereo. Designed for Dodge Ram 1500, 2500, and 3500 models from 2013 to 2019, this unit features a 9-inch IPS HD touchscreen, wireless/wired CarPlay and Android Auto, 5G WiFi, Bluetooth 5.0, GPS navigation, steering wheel control (SWC), DSP, and AM/FM radio. Please read this manual thoroughly before use to ensure optimal performance and safety.

Fiosrachadh Sàbhailteachd

• Stàladh proifeiseanta air a mholadh: Air sgàth cho iom-fhillte ‘s a tha siostaman dealain chàraichean, thathas a’ moladh gu mòr gun tèid an stàladh gu proifeasanta gus casg a chuir air milleadh air an aonad no air a’ charbad.
• Disconnect Bataraidh: Dì-cheangail ceann-uidhe àicheil bataraidh a’ charbaid an-còmhnaidh mus tòisich thu air obair dealain sam bith gus casg a chur air cuairtean goirid agus cunnartan dealain.
• Dèan sgrùdadh air co-chòrdalachd: Ro cheannachasing and installation, ensure the unit is compatible with your vehicle's specific model, year, and AC type (manual AC).
• Uèir tèarainte: Ensure all wiring is properly connected, insulated, and secured to prevent interference, short circuits, or accidental disconnections.
• Seachain Buairidhean: Do not operate the unit or watch videos while driving. Always prioritize safe driving.

Susbaint pacaid

Dèan cinnteach gu bheil na nithean gu lèir a tha air an liostadh gu h-ìosal air an toirt a-steach don phacaid agad:

• Head Unit (with 9-inch IPS HD Touchscreen)
• Frame (pre-installed on head unit)
• Wire Cables (main power harness, RCA cables, USB cables)
• Crowbar (installation tool)
• Speaker (external)
• Càball USB (x2)
• Càbaill cumhachd
• Càball RCA
• Micreofon taobh a-muigh
• Dì-chòdaichear Canbus
• Càball Adaptor Antenna
• RCA Cable to connect rear camera
• Modal GPS

Stàladh agus stàladh

The installation process involves removing the original factory radio and fascia, connecting the new head unit, and securing it in place. It is a plug-and-play design, but careful attention to detail is required.

1. Removing the Original Unit

1. Remove Top Dash Panel: Use the provided crowbar tool to gently pry up and remove the top dash panel above the factory radio. This panel is typically held by clips.
2. Unscrew Top Screws: Once the top panel is removed, locate and unscrew the two screws securing the top of the factory radio assembly.
3. Thoir air falbh pannalan taobh: Carefully pry off the side trim panels of the radio assembly. These are also typically held by clips.
4. Unscrew Main Unit: Locate and unscrew the main bolts/screws holding the factory radio unit in place. There are usually four larger bolts.
5. Dì-cheangail càbaill: Gently pull the factory radio unit forward and disconnect all electrical connectors from the back. Be careful not to damage any wires or connectors.

2. Installing the New Junsun Unit

1. Ullaich Aonad Ùr: The Junsun head unit comes pre-installed in a new fascia designed for your Dodge Ram.
2. Ceangail acfhainn uèir: Connect the provided main wiring harness to the corresponding ports on the back of the Junsun head unit.
3. Connect CANBUS Decoder: Connect the CANBUS decoder to the main wiring harness. This is crucial for retaining steering wheel controls and other vehicle data.
4. Ceangail Antenna GPS: Connect the GPS antenna to the designated port on the head unit. Route the antenna cable to a location on the dashboard or A-pillar with a clear view na speuran airson gabhail ris a’ chomharra as fheàrr.
5. Ceangail càbaill USB: Connect the two USB cables. These can be routed to the glove compartment or a custom-drilled hole for easy access.
6. Ceangail Micreofon Taobh a-muigh: Connect the external microphone for improved call quality. Route it to a suitable location, such as near the rearview mirror or on the A-pillar.
7. Connect Rearview Camara (Roghainneil): If installing an aftermarket rearview camera, connect its RCA cable to the 'Rear CAM In' port on the head unit. Ensure the reverse trigger wire is connected to the vehicle's reverse light signal.
8. Connect Original Vehicle Connectors: Connect the new wiring harness to the original vehicle connectors that were previously attached to the factory radio.
9. Gnìomhachd deuchainn: Before fully reassembling, turn on the vehicle and test all functions of the new stereo: power, audio, CarPlay/Android Auto, Bluetooth, GPS, steering wheel controls, and rearview camara.
10. Secure New Unit: Carefully slide the new head unit assembly into the dashboard opening. Secure it with the screws removed earlier.
11. Ath-shuidhich na pannalan: Reattach the side trim panels and the top dash panel, ensuring all clips snap securely into place.

Bhideothan stàlaidh

Stiùireadh Obrachaidh

1. CarPlay gun uèir/le uèir & Android Auto

• Wireless CarPlay: Connect your iPhone via Bluetooth. Once paired, CarPlay will launch automatically, allowing access to navigation, music, calls, and messages.
• Wired/Wireless Android Auto: Connect your Android device via Bluetooth or USB. Android Auto provides a simplified interface for essential apps while driving.
• Sgàthan sgrion: Project your phone's screen onto the head unit for movies, games, or other content.

2. Seòladh GPS

• The unit comes with built-in navigation software supporting online and offline maps.
• Connect to 5G WiFi to download map updates and access real-time traffic information.
• Use the touchscreen to input destinations and follow turn-by-turn directions.

3. Smachd Cuibhle Stiùiridh (SWC)

• The unit retains your original steering wheel controls.
• Use SWC buttons to adjust volume, change tracks, answer/end calls, and navigate menus without taking your hands off the wheel.

4. Bluetooth 5.0

• Pair your smartphone for hands-free calling and seamless music streaming.
• The external microphone ensures clear audio during calls.

5. Rèidio AM/FM

• Access high-quality FM/AM radio stations.
• Stay updated with traffic news and weather forecasts.

6. Digital Sound Processor (DSP)

• Customize your audio experience with the built-in 16-band EQ DSP sound effect.
• Adjust sound settings for optimal clarity and bass.

7. Cùlview Camara

• When the vehicle is in reverse, the rearview image will automatically display on the screen.
• Provides parking assistance with guidelines.

8. Split Screen Function

• Multitask by running two applications simultaneously on the screen.
• Airson example, cleachd seòladh air aon taobh agus ath-chluich ceòl air an taobh eile.

9. 5GHz WiFi Connectivity

• Connect to a WiFi hotspot for internet access, app downloads, and online navigation.

Ag obair bhidiothan

Cumail suas

• Glanadh: Use a soft, dry cloth to clean the touchscreen and exterior of the unit. Avoid abrasive cleaners or solvents.
• Ùrachaidhean bathar-bog: The unit supports wireless software updates to address bugs and enhance security. Access the update feature through the system settings. Note that these updates improve software usability and do not upgrade the Android version.
• Teòthachd: Seachain a bhith a’ nochdadh an aonad gu teòthachd anabarrach.

Fuasgladh thrioblaidean

Sònrachaidhean

• Brand: Junsun
• Seòrsa Seirbheis Carbaid: Truck (Dodge Ram 1500, 2500, 3500, 2013-2019)
• Meud sgrion: 9 òirlich
• Seòrsa taisbeanaidh: IPS HD Touchscreen (1280x720 pixels)
• Siostam-obrachaidh: Android 13
• Cuimhne: 2 GB de RAM, 64 GB ROM
• Teicneòlas ceangail: Bluetooth 5.0, 5G Wi-Fi, USB
• Feartan sònraichte: Wireless/Wired CarPlay, Android Auto, Screen Mirroring, GPS Navigation (North America maps), Steering Wheel Control (SWC), DSP, AM/FM Radio, Rearview Taic camara.
• Modh smachd: Tadhail, Guth
• Co-phàirtean air an toirt a-steach: Head unit, Frame, Wire cables, Crowbar, External Speaker, USB cables, RCA cables, Canbus, Antenna Adapter, GPS Module.
• Cuideam nì: 1.7 cileagram

Barantas agus Taic

Your Junsun Car Stereo Radio comes with a Barantas an neach-dèanamh 1-bliadhna. For any inquiries, technical assistance, or issues, please contact our professional after-sales support team. They are available 24/7 to provide quick responses and product knowledge assistance.

Neach-taice Fios: Junsun-US@outlook.com