Dytole Wireless Headphones for TV - User Manual

Na tha air a ghabhail a-steach

Your Dytole Wireless Headphones package includes the following components:

• Fòn-cluaise gun uèir
• Bunait cosgais
• Càball claisneachd optigeach
• Càball claisneachd 3.5mm AUX
• Càball Adaptor RCA
• Càball cosgais USB
• Leabhar-làimhe cleachdaiche (an sgrìobhainn seo)

Image: Dytole Wireless Headphones resting on their charging dock, with various connection cables laid out in front.

Stiùireadh rèiteachaidh

1. Suidheachadh tòiseachaidh

1. Dì-phacaich na co-phàirtean: Thoir air falbh a h-uile nì gu faiceallach bhon phacaid.
2. Àite airson Bunait Cosgais: Position the charging base near your TV or audio source.
3. Ceangal cumhachd: Connect the USB charging cable to the charging base and plug the other end into a power source (e.g., USB wall adapter, TV USB port). The charging indicator light on the base will illuminate.
4. Cuir cosgais air fònaichean-cluaise: Place the headphones onto the charging base. Ensure the charging contacts align. The charging indicator on the base will turn red while charging and solid green when fully charged. A full charge takes approximately 2.5 hours.

2. A ’ceangal ris an Tbh agad

The Dytole Wireless Headphones offer multiple connection options to ensure compatibility with most televisions. The recommended method is Optical for optimal audio quality and minimal latency.

Ceangal optigeach (air a mholadh)

This method provides the best audio quality and lowest latency.

1. Locate the "Optical Out" or "Digital Audio Out" port on your TV.
2. Connect one end of the Optical Audio Cable to the Optical port on your TV.
3. Connect the other end of the Optical Audio Cable to the "Digital Optical" input on the back of the headphone charging base.
4. On your TV's audio settings, select "Optical Out" or "Digital Audio Out" as the audio output.

Image: The charging dock with various connection ports (Optical, RCA, AUX) and icons representing compatible devices like TVs, phones, and computers.

Ceangal AUX 3.5mm

Use this method if your TV has a 3.5mm audio output (headphone jack).

1. Connect one end of the 3.5mm AUX Audio Cable to the headphone jack on your TV.
2. Connect the other end of the 3.5mm AUX Audio Cable to the "Aux" input on the back of the headphone charging base.
3. On your TV's audio settings, select "Headphone Out" or "Analog Audio Out" as the audio output.

Ceangal RCA

Use this method if your TV has red and white RCA audio output ports.

1. Connect the RCA Adapter Cable (red and white plugs) to the corresponding red and white "Audio Out" ports on your TV.
2. Connect the 3.5mm plug of the RCA Adapter Cable to the "Aux" input on the back of the headphone charging base.
3. On your TV's audio settings, select "Analog Audio Out" as the audio output.

3. Bluetooth Pairing (for Mobile Devices/Computers)

While primarily designed for TV, these headphones can also connect to other Bluetooth-enabled devices.

1. Dèan cinnteach gu bheil na fònaichean-cluaise air an cur air agus air an cur air.
2. Air an inneal gluasadach no coimpiutair agad, leig le Bluetooth agus rannsaich airson innealan a tha rim faighinn.
3. Select "Dytole TV001" (or similar) from the list of found devices.
4. Once paired, the headphones will indicate a successful connection (e.g., solid blue LED on the base).

Stiùireadh Obrachaidh

Cumhachd air / dheth

• To power on the headphones, slide the power switch located on the right earcup to the "ON" position.
• Gus an cumhachd a chuir dheth, sleamhnaich an suidse chun t-suidheachaidh "OFF".

Smachd tomhas-lìonaidh

• Use the volume up (+) and volume down (-) buttons on the right earcup to adjust the headphone volume.
• For optimal sound, ensure your TV's volume is set to a moderate level before adjusting the headphone volume.

Image: A man relaxing on a couch, wearing the Dytole Wireless Headphones and holding a TV remote, illustrating the immersive audio experience.

A 'cur cosgais

• Place the headphones onto the charging base when not in use. The base will automatically begin charging.
• The charging indicator on the base will be red during charging and turn solid green when fully charged.
• The headphones offer up to 65 hours of battery life on a single charge.

Cumail suas

• Glanadh: Use a soft, dry cloth to clean the headphones and charging base. Do not use abrasive cleaners or solvents.
• Stòradh: Store the headphones on the charging base in a cool, dry place when not in use. Avoid extreme temperatures.
• Cùram Bataraidh: Gus beatha a’ bhataraidh a leudachadh, seachain na fònaichean-cluaise a dhì-luchdachadh gu tur gu tric. Cuir cosgais orra gu cunbhalach.

Fuasgladh thrioblaidean

Sònrachaidhean

• Modail: TV001-V3
• Teicneòlas ceangail: Gun Uèir (Bluetooth 5.2)
• Toraidhean claisneachd: Optical Fiber, 3.5mm AUX, RCA
• Beatha bataraidh: Suas gu 65 uairean
• Ùine cosgais: Mu 2.5 uair a thìde
• Raon gun uèir: Suas gu 30 meatairean (100 troighean)
• Smachd fuaim: Cur às do fhuaim gnìomhach
• Seòrsa cluasag: Thar-chluas
• Stuth: Plastaig
• Seòrsa draibhear fuaim: Dràibhear Dynamic
• Raon tricead: 20 Hz gu 20,000 Hz
• Impedance: 32 Ach
• Cuideam nì: 1.81 not

Barantas agus Taic

Dytole products are designed for durability and performance. For any issues with your order or to inquire about warranty information, please contact us directly.

Post-d: DY_Bussiness@outlook.com

Please provide your order details when contacting support for faster assistance.