Promethean WiFi Module

Promethean WiFi Module User Manual

For ActivPanel v7 Cobalt and Nickel Models

1. Ro-ràdh

This manual provides detailed instructions for the installation, operation, and maintenance of the Promethean WiFi Module. This module is designed to integrate seamlessly with Promethean ActivPanel v7 Cobalt and Nickel interactive displays, enabling wireless network connectivity.

Please read this manual thoroughly before installation and use to ensure proper functionality and to prevent damage to the device or the ActivPanel.

2. Fiosrachadh Sàbhailteachd

  • Ensure the ActivPanel is powered off and disconnected from the main power supply before installing or removing the WiFi module.
  • Handle the module with care to avoid static discharge.
  • Do not attempt to disassemble or modify the module. This will void the warranty.
  • Keep the module away from liquids and extreme temperatures.

3. Pasgan-susbaint

Dèan cinnteach gu bheil na nithean a leanas anns a’ phacaid agad:

  • Promethean WiFi Module (with two attached antennas)
  • An Leabhar-làimhe Cleachdaiche seo
Promethean WiFi Module front view

Dealbh 1: Aghaidh view of the Promethean WiFi Module, showing the USB connector and two antennas.

Promethean WiFi Module rear view le leubail

Dealbh 2: Cùl view of the Promethean WiFi Module, displaying regulatory labels and product information.

4. Setup agus Stàladh

Follow these steps to install the Promethean WiFi Module into your ActivPanel v7 Cobalt or Nickel:

  1. Power Off ActivPanel: Ensure the ActivPanel is completely powered off and unplugged from the electrical outlet.
  2. Locate Module Slot: Identify the dedicated WiFi module slot on your ActivPanel. Refer to your ActivPanel's user manual for the exact location, typically on the side or rear panel.
  3. Cuir a-steach am Modúl: Carefully insert the Promethean WiFi Module into the designated slot. Ensure it is firmly seated. Do not force the module.
  4. Tèarainte (mas e iomchaidh): Some ActivPanel models may have a securing mechanism (e.g., a screw or latch) for the module. Secure it if available.
  5. Power On ActivPanel: Plug the ActivPanel back into the electrical outlet and power it on.
  6. Dearbhaich an stàladh: Once the ActivPanel has booted, navigate to the network settings to confirm that the WiFi module is recognized and active.

5. Stiùireadh Obrachaidh

5.1 A’ ceangal ri lìonra Wi-Fi

After successful installation, follow these steps to connect your ActivPanel to a wireless network:

  1. Roghainnean inntrigidh: From the ActivPanel's main menu, navigate to Suidhichidhean.
  2. Select Network & Internet: Tagh an Lìonra & eadar-lìon no roghainn coltach ris.
  3. Dèan comas air Wi-Fi: Ensure the Wi-Fi toggle is set to On.
  4. Tagh Lìonra: Nochdaidh liosta de na lìonraidhean Wi-Fi a tha rim faighinn. Tagh an lìonra a tha thu ag iarraidh.
  5. Cuir a-steach facal-faire: If prompted, enter the Wi-Fi network password (security key) and select Ceangail.
  6. Dearbhaich an ceangal: The ActivPanel should now display a "Connected" status next to your chosen network.

5.2 Optimizing Wi-Fi Performance

  • Ensure the ActivPanel is within reasonable range of your wireless router or access point.
  • Avoid placing the ActivPanel or router near large metal objects or other devices that may cause interference (e.g., microwaves, cordless phones).
  • Keep the ActivPanel's software and firmware updated to ensure optimal network driver performance.

6. Cumail suas

The Promethean WiFi Module requires minimal maintenance. Follow these guidelines to ensure its longevity:

  • Glanadh: If necessary, gently wipe the exterior of the module with a soft, dry cloth. Do not use liquid cleaners or solvents.
  • Ùrachaidhean firmware: Periodically check for ActivPanel firmware updates, as these may include updated drivers for the WiFi module, improving performance and stability.
  • Stòradh: If removing the module for extended periods, store it in a dry, dust-free environment.

7. A ’dèanamh trioblaid

TrioblaidAdhbhar a dh’fhaodadh a bhith annFuasgladh
Cha deach lìonraidhean Wi-Fi a lorg.Module not properly installed or recognized. Wi-Fi disabled. Router off or out of range.
  • 1. Power off ActivPanel, re-seat the module, then power on.
  • 2. Check ActivPanel network settings to ensure Wi-Fi is enabled.
  • 3. Verify your Wi-Fi router is powered on and functioning.
  • 4. Move ActivPanel closer to the router or reduce obstructions.
Chan urrainnear ceangal ri lìonra Wi-Fi sònraichte.Incorrect password. Network issues.
  • 1. Double-check the Wi-Fi password. Ensure correct capitalization.
  • 2. Restart your Wi-Fi router and modem.
  • 3. Try connecting another device to the same network to confirm it's operational.
Frequent disconnections or slow speeds.Interference. Weak signal. Outdated firmware.
  • 1. Reduce interference sources (e.g., other electronics).
  • 2. Ensure ActivPanel is within optimal range of the router.
  • 3. Check for and install any available ActivPanel firmware updates.

8. Sònrachaidhean

FeartMion-fhiosrachadh
Ainm toraidhPromethean WiFi Module
Co-fhreagarrachdPromethean ActivPanel v7 Cobalt, ActivPanel v7 Nickel
Meudan (Pasgan)4.25 x 0.39 x 0.39 òirleach
Cuideam nì6.2 unnsa
ASINB0F2TSK9HB
UPC810191440093
DèanadairPromethean

9. Barantas agus Taic

This Promethean WiFi Module is covered by the standard manufacturer's warranty. For detailed warranty terms and conditions, please refer to the documentation provided with your ActivPanel or visit the official Promethean weblàrach.

For technical support, troubleshooting assistance, or to report an issue, please contact Promethean Customer Support through their official website or the contact information provided with your ActivPanel purchase.

Goireasan air-loidhne: www.prometheanworld.com/support

© 2025 Promethean. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.