1. Ro-ràdh
Thank you for choosing the FLITI AMS193 Motion Sensor Solar Security Lights. This product is designed to provide efficient and reliable outdoor lighting using solar power, featuring adjustable heads, a sensitive motion sensor, and a durable waterproof design. Please read this manual carefully before installation and use to ensure optimal performance and safety.
2. Fiosrachadh Sàbhailteachd
- Ensure the product is installed in a location that receives direct sunlight for at least 6-8 hours daily to ensure proper charging.
- Do not disassemble or modify the product. Unauthorized modifications may cause damage and void the warranty.
- Cùm an toradh air falbh bho theine no teòthachd àrd.
- Seachain conaltradh dìreach ri solas soilleir LED.
- Tilg air falbh bataraidhean agus co-phàirtean dealain a rèir riaghailtean ionadail.
- This product is IP65 waterproof, suitable for outdoor use in various weather conditions, but avoid submerging it in water.
3. Pasgan-susbaint
Thoir sùil air a’ phacaid gus dèanamh cinnteach gu bheil a h-uile nì an làthair:
- FLITI AMS193 Solar Security Light Unit (x2)
- Bracaid cur suas (x2)
- Screws and Wall Plugs (x4 sets)
- Leabhar-làimhe Cleachdaiche (x1)
4. Feartan toraidh
- Soillseachadh Super Bright: Equipped with 229 high-quality LED beads, providing up to 2500 lumens of 6500K bright white light.
- Wider Lighting Area: Features 3 independently adjustable lamp heads and a rotatable solar panel, allowing for omnidirectional and multi-angle lighting coverage up to 120 degrees.
- Ultra-Sensitive Motion Sensor: An upgraded infrared digital motion sensor detects movement up to 12 meters (39 feet) within a 120-degree angle, activating the light quickly at night.
- IP65 uisge-dhìonach: Durable construction ensures reliable operation in various outdoor weather conditions, including rain and snow.
- Solar Powered & Wireless: Environmentally friendly and easy to install without the need for electrical wiring.
Image: Key features of the FLITI AMS193 solar light, including sensing distance, operating modes, and waterproof rating.
Image: High-quality LED beads and brightness comparison.
Image: IP65 Waterproof feature in action during rain.
5. Setup agus Stàladh
The FLITI AMS193 solar security light is designed for quick and simple wireless installation.
5.1 A’ taghadh àite stàlaidh
- Select a location that receives direct sunlight for at least 6-8 hours per day to ensure the solar panel can fully charge the battery.
- Avoid areas under eaves, trees, or other obstructions that might block sunlight or motion sensor detection.
- Mount the light at a height of approximately 2-3 meters (6.5-10 feet) for optimal motion detection and light coverage.
5.2 Ceumannan Stàlaidh
- Mark the desired installation position on the wall.
- Drile dà tholl aig na h-àiteachan comharraichte.
- Cuir a-steach na plugaichean balla a-steach do na tuill drile.
- Daingnich am bracaid sreap ris a’ bhalla a’ cleachdadh nan sgriothan a tha air an toirt seachad.
- Slide the solar light unit onto the mounting bracket until it clicks securely into place.
Image: Installation steps for mounting the solar light.
5.3 Adjusting Light Heads and Solar Panel
The solar panel and the three lamp heads can be rotated independently to customize lighting direction and solar charging angle.
- Adjust the solar panel to face direct sunlight for maximum charging efficiency.
- Angle the three lamp heads to cover your desired lighting areas, such as pathways, doorways, or garden sections.
Image: Flexible rotation design of the solar panel and light heads.
6. Stiùireadh Obrachaidh
The FLITI AMS193 features three distinct operating modes, selectable via a button on the back of the unit.
6.1 Cìs tòiseachaidh
Before first use, allow the solar light to charge in direct sunlight for at least 8-10 hours to ensure the battery is fully charged.
Image: Solar light charging during the day and activating at night.
6.2 Taghadh Modh
Press the power button on the back of the unit to cycle through the following modes:
- Mode 1 (Motion Sensor Mode): The light remains off until motion is detected. When motion is sensed, the light turns on at full 2500LM brightness for approximately 20 seconds, then turns off after motion ceases.
- Mode 2 (Dim to Sensor Mode): The light automatically turns on at dusk at a low brightness (approx. 200LM). When motion is detected, it switches to full 2500LM brightness for approximately 20 seconds, then returns to dim brightness after motion ceases. After 6 hours of operation, it automatically switches to Mode 1.
- Mode 3 (Always On Mode): The light automatically turns on at dusk at a medium brightness (approx. 500LM) and stays on continuously. After 4 hours of operation, it automatically switches to Mode 1.
Image: Visual representation of the three operating modes.
7. Cumail suas
Regular maintenance ensures the longevity and optimal performance of your solar lights.
- Pannal grèine glan: Glan am pannal grèine bho àm gu àm le clò bog, tioram.amp clò gus duslach, salachar no sprùilleach a thoirt air falbh. Nì pannal glan cinnteach gum bi solas na grèine air a ghabhail a-steach agus gum bi e cho èifeachdach sa ghabhas airson cosgais.
- Ath-nuadhachadh bataraidh: The unit uses rechargeable batteries. If the light's performance significantly decreases over time, the batteries may need replacement. Access the battery compartment by removing the plate cover. Ensure to replace with compatible rechargeable batteries.
- Dèan sgrùdadh airson milleadh: Regularly check the light for any physical damage, loose connections, or signs of wear.
8. A ’dèanamh trioblaid
If you encounter issues with your FLITI AMS193 solar lights, refer to the following common problems and solutions:
| Trioblaid | Adhbhar a dh’fhaodadh a bhith ann | Fuasgladh |
|---|---|---|
| Chan eil solas a 'tionndadh air an oidhche. | Gun solas na grèine gu leòr airson luchdachadh. Switch is off or in incorrect mode. Battery depleted or faulty. | Dèan cinnteach gum faigh am pannal grèine 6-8 uairean a thìde de sholas dìreach gach latha. Check the operating mode and ensure it's set correctly (Mode 1, 2, or 3). Allow several days of charging. If issue persists, consider replacing the rechargeable battery. |
| Tha an solas lag no chan eil e air ach airson ùine ghoirid. | Cosgais neo-iomchaidh. Pannal grèine salach. Bataraidh a tha a’ fàs sean. | Gluais an solas gu àite le barrachd solas dìreach. Glan am pannal grèine gu cunbhalach. Replace the rechargeable battery if it's old. |
| Motion sensor is not working or too sensitive. | Braitear air a bhacadh. Incorrect mounting height/angle. Environmental factors (e.g., strong winds, heat sources). | Dèan cinnteach gu bheil lionsa an sensor glan agus gun bhacadh. Adjust the mounting height and angle for optimal detection. Consider relocating if false triggers are frequent due to environmental factors. |
Mura rèitich na fuasglaidhean seo an duilgheadas, cuir fios gu taic luchd-cleachdaidh.
9. Sònrachaidhean
| Feart | Sònrachadh |
|---|---|
| Modail Àireamh | AMS193 |
| Brand | FLITI |
| Stòr Solais | 229 grìogagan LED |
| Gile | Suas gu 2500 Lumens |
| Teòthachd dath | 6500 Kelvin (Cool White) |
| Raon mothachaidh gluasad | Suas gu 12 meatairean (39 troighean) |
| Ceàrn mothachaidh gluasad | 120 ceum |
| Frith-aghaidh uisge | IP65 uisge-dhìonach |
| Stòr cumhachd | Solar cumhachd |
| Stuth | Plastaig |
| Seòrsa stàladh | Srath balla |
| Number of Light Heads | 3 (Atharrachadh) |
10. Barantas agus Taic
Barantas Dèanadair: This product comes with a 2-year manufacturer warranty from the date of purchase, covering defects in materials and workmanship under normal use.
Dè tha air a chòmhdach: Duilgheadasan ann an stuthan agus obair-obrach.
Dè nach eil air a chòmhdach: Damage caused by improper installation, misuse, abuse, accidents, unauthorized repairs or modifications, or normal wear and tear.
Taic teachdaiche: For warranty claims, technical assistance, or any questions regarding your FLITI AMS193 solar lights, please contact your retailer or the manufacturer's customer service through the contact information provided at the point of purchase.