1. Ro-ràdh
This manual provides essential instructions for the safe and efficient operation of your OMTech 20W Autofocus Fiber Laser Marking Machine. This device is designed for precise engraving and marking on a variety of materials, including metals, plastics, stone, gold, and leather. Please read this manual thoroughly before initial use and retain it for future reference.
2. Fiosrachadh Sàbhailteachd
RABHADH: This product contains a Class 2 laser with 0.874 mW output power. Direct exposure to the laser beam may cause eye injury. Always wear the provided laser safety goggles during operation. Never look directly into the laser beam or at reflections. Ensure the work area is well-ventilated. Keep children and unauthorized personnel away from the machine during operation. Disconnect power before performing any maintenance or adjustments.
3. Pasgan-susbaint
Dearbhaich gu bheil na nithean gu lèir a tha air an liostadh gu h-ìosal an làthair sa phacaid agad:
- Bogsa smachd le gàirdean laser
- Colbh taice
- Goggles sàbhailteachd laser
- 11.8 inch Ruler
- Suidheachadh Lock Bars
- Seata Wrench Hex
- Draibhearan airson USB flash drive
- Laser Keys
- Sgriothan stàlaidh
- Corda cumhachd
- Càball USB
- Terminal smachd iomallach
- Sgrobhadair
4. Suidhich
Follow these steps to set up your laser marking machine:
- Dì-phacaich na co-phàirtean: Thoir air falbh na pàirtean gu lèir bhon phacaid gu faiceallach.
- Attach Support Column: Connect the support column to the worktable base. Secure it firmly using the provided screws and hex wrench.
- Mount Laser Arm: Fix the laser arm to the support column. Adjust its position based on your project needs and secure it.
- Ceangail smachd iomallach: Plug the remote control cable into the designated port on the machine's rear panel and secure it.
- Ceangail USB càball: Ceangail an càball USB bhon inneal chun choimpiutair agad.
- Ceangail sreang cumhachd: Plug an càball cumhachd a-steach don inneal agus an uairsin a-steach do shoitheach dealain le talamh.
- Insert Laser Key: Insert the laser key into the key switch on the front panel.
5. Stiùireadh Obrachaidh
This section covers the basic operation of your OMTech Fiber Laser Marking Machine.
5.1 Power On and Initial Checks
- Dèan cinnteach gu bheil a h-uile ceangal tèarainte.
- Turn the laser key to the ON position.
- Press the Emergency Stop button to release it if it is engaged.
- Press the Fiber Laser button to activate the laser.
5.2 Autofocus Function
The machine features an automatic focusing system for precise engraving.
- Place your material on the workbed.
- Press the 'Autofocus' button on the control panel. The laser head will automatically adjust its height to achieve optimal focus.
- Alternatively, use the 'Head Up' and 'Head Down' buttons for manual fine-tuning if needed.
5.3 Software Connection (LightBurn)
Your OMTech laser engraver is compatible with LightBurn software. Follow these steps to connect:
- Open LightBurn software on your computer.
- Go to 'Devices' and click 'Find My Laser'.
- Ensure your machine is connected via USB.
- LightBurn will scan for connected devices. This may take a few moments.
- Once identified, click 'Add Device'. You may rename the device for easier identification.
- Select your laser origin (e.g., Front Left, Rear Right) and click 'Finish'.
5.4 Engraving with Rotary Axis (Optional)
If your model includes a rotary axis or you have purchased one separately, you can engrave cylindrical objects.
- Connect the rotary axis to the designated port on the machine.
- Place the cylindrical object securely in the rotary axis chuck.
- Adjust software settings for rotary engraving.
6. Co-fhreagarrachd Stuth
The OMTech 20W Autofocus Fiber Laser Marking Machine is suitable for engraving and marking on a wide range of materials:
- Metals: Stainless Steel, Gold, Silver, Brass, Iron, Titanium, Aluminum, Copper
- Plastics: ABS
- Stone: Marble, Granite, Stone
- Other: Leather, Wood (for marking, not cutting)
7. Cumail suas
Regular maintenance ensures optimal performance and longevity of your laser marking machine.
- Glanadh lionsa: Periodically inspect and clean the laser lens using a soft, lint-free cloth and lens cleaning solution. Avoid abrasive materials.
- Workbed Cleaning: Keep the workbed clean from debris and dust to ensure proper material placement and prevent interference with the laser path.
- Fionnarachadh: Ensure the machine's ventilation openings are clear and unobstructed to prevent overheating.
- Sgrùdadh càball: Regularly check all cables for any signs of wear or damage. Replace damaged cables immediately.
- Ùrachaidhean bathar-bog: Keep your LightBurn software updated to the latest version for improved features and compatibility.
8. A ’dèanamh trioblaid
Tha an earrann seo a’ dèiligeadh ri cùisean cumanta a dh’ fhaodadh tu a thighinn tarsainn orra.
- Inneal gun chumhachd air:
- Check if the power cord is securely connected to both the machine and the power outlet.
- Ensure the power switch on the machine's rear panel is in the 'ON' position.
- Verify the laser key is inserted and turned to the 'ON' position.
- Check if the Emergency Stop button is released.
- Laser gun a bhith a’ losgadh:
- Confirm the Fiber Laser button is pressed.
- Ensure the software is correctly connected and sending commands.
- Check for any error messages in the software.
- Droch chàileachd greanta:
- Verify the autofocus function has been performed correctly, or manually adjust the focus.
- Ensure the material is flat and securely placed on the workbed.
- Check software settings (power, speed, frequency) for the specific material being used.
- Glan lionsa an leusair ma tha e coltach gu bheil e salach.
- Cùisean Ceangail Bathar-bog:
- Dèan cinnteach gu bheil an càball USB ceangailte gu ceart.
- Restart both the machine and your computer.
- Re-run the device discovery wizard in LightBurn.
- Install the latest drivers for your machine, usually found on the provided USB flash drive or the manufacturer's weblàrach.
9. Sònrachaidhean
| Feart | Sònrachadh |
|---|---|
| Cumhachd laser | 20W |
| Laser Source Lifespan | Còrr is 100,000 uair a thìde |
| Cruinneas gràbhaladh | ±0.01 mm |
| Raon gràbhalaidh | 4.3" x 4.3" (110mm x 110mm) |
| Max Engraving Speed | 10,000 mm / s |
| Meudan (L x W x H) | 26.8" x 13.4" x 28" |
| Clas laser | Clas 2 |
| Cumhachd Toraidh | 0.874 mW |
| Co-fhreagarrachd bathar-bog | LightBurn, EzCad |
| Dèanadair | OMTech |
| Modail Àireamh | LYF-20W |
10. Barantas agus Taic
OMTech provides comprehensive support for your laser marking machine:
- Two-Year Support: Your product is covered by a two-year support period.
- U.S.-based Technical Support: Access to technical support located in the United States for quick assistance.
- 24/7 Online Customer Service: Round-the-clock online customer service is available for inquiries and assistance.
Airson tuilleadh cuideachaidh, tadhail air an OMTech Store on Amazon no cuir fios gu seirbheis teachdaiche gu dìreach.