Leabhar-stiùiridh Solas Bollard LED RAB Lighting B17

1. Ro-ràdh

This manual provides detailed instructions for the installation, operation, and maintenance of the RAB Lighting B17 LED Bollard Light. This outdoor luminaire features field-adjustable wattage and selectable color temperature (CCT), designed for various outdoor applications.

Am measg nam prìomh fheartan tha:

• Energy-efficient LED with a 50,000-hour lifespan.
• Wat a ghabhas atharrachadhtage: 24W, 19W, or 14W.
• Selectable CCT: 3000K (Warm White), 4000K (Neutral White), or 5000K (Cool White).
• 0-10V dimming capability.
• Air a liostadh le UL airson àiteachan fliuch.
• Durable metal construction with a glass shade.

Figure 1: RAB Lighting B17 LED Bollard Light (Model B17D shown).

2. Fiosrachadh Sàbhailteachd

RABHADH: Cunnart clisgeadh dealain. Dì-cheangail an cumhachd mus tèid a stàladh no a sheirbheiseachadh. Bu chòir do dhealanair teisteanasach an stàladh a dhèanamh a rèir nan còdan dealain nàiseanta is ionadail uile a tha buntainneach.

• Dèan cinnteach gu bheil an solar voltagTha e ceart airson an uidheamachd.
• Do not handle live components.
• Cuir ort uidheam dìon pearsanta (PPE) iomchaidh.
• This fixture is suitable for wet locations. Ensure all connections are properly sealed to prevent water ingress.
• Na atharraich an uidheam. Dh’fhaodadh atharrachaidhean sam bith am barantas a chur às a leth agus cunnartan sàbhailteachd a chruthachadh.

3. Pasgan-susbaint

Dèan cinnteach gu bheil na pàirtean uile an làthair mus tòisich an stàladh:

• B17 LED Bollard Light Fixture
• On-Off Switch (Included Components)
• Installation Hardware (e.g., mounting bolts, gaskets) - (Assumed, not explicitly listed but typical for such products)
• Leabhar-stiùiridh (an sgrìobhainn seo)

4. Setup agus Stàladh

Follow these steps for proper installation of the B17 LED Bollard Light:

1. Ullaich an làrach stàlaidh: Ensure the mounting surface is stable and level. Run electrical conduit and wiring to the desired location according to local codes.
2. Cumhachd dì-cheangail: Cuir dheth an cumhachd aig a’ bhriseadair cuairte mus tòisich thu air obair dealain sam bith.
3. Mount the Bollard: Secure the bollard base to the mounting surface using appropriate hardware. Ensure a watertight seal if required by local codes.
4. Dèan ceanglaichean dealain: Connect the fixture's wires to the supply wires. Follow standard wiring practices:
   • Black to Line (L)
   • White to Neutral (N)
   • Green/Ground to Ground (G)
   • Purple to Dimming (+) (for 0-10V dimming)
   • Gray to Dimming (-) (for 0-10V dimming)
   Dèan cinnteach gu bheil a h-uile ceangal tèarainte agus dìonach.
5. Tagh Wattage agus CCT: Before closing the fixture, adjust the wattage and CCT switches located inside the fixture head. Refer to Section 5 for details.
6. Secure the Fixture Head: Attach the fixture head to the bollard body, ensuring all seals are properly seated to maintain the wet location rating.
7. Thoir air ais cumhachd: Turn on power at the circuit breaker and test the light.

Figure 2: The B17 Bollard Light is UL Listed and rated for wet locations, ensuring durability in outdoor environments.

5. Stiùireadh Obrachaidh

5.1. Field-Adjustable Wattage

The B17 bollard light allows you to select the desired wattage output to optimize brightness and energy consumption. A switch located inside the fixture head enables selection between 24W, 19W, and 14W.

• 24W: An soilleireachd as àirde.
• 19W: Medium brightness, reduced energy use.
• 14W: Lower brightness, maximum energy savings.

Gus a rèiteachadh: Disconnect power. Open the fixture head. Locate the wattage selection switch and move it to the desired setting. Close the fixture head and restore power.

5.2. Teòthachd Dath Taghte (CCT)

The fixture offers three color temperature options to suit different aesthetic preferences and applications. A separate switch inside the fixture head allows selection between 3000K, 4000K, and 5000K.

• 3000K: Warm White, ideal for creating a cozy and inviting atmosphere.
• 4000K: Neutral White, suitable for general illumination and task lighting.
• 5000K: Cool White, provides bright, crisp light, often used for security or modern aesthetics.

Gus a rèiteachadh: Disconnect power. Open the fixture head. Locate the CCT selection switch and move it to the desired setting. Close the fixture head and restore power.

Figure 3: Visual representation of adjustable wattage and selectable CCT settings.

5.3. 0-10V Dimming

The B17 bollard light is compatible with 0-10V dimming systems. Connect the purple and gray dimming wires to a compatible 0-10V dimmer control. This allows for smooth adjustment of light output from 100% down to 10% (or lower, depending on dimmer specifications).

Ensure the dimmer is rated for LED loads and is compatible with 0-10V dimming protocols.

6. Cumail suas

The B17 LED Bollard Light is designed for minimal maintenance due to its long LED lifespan of 50,000 hours.

• Glanadh: Glan taobh a-muigh an inneil-uidheamachaidh bho àm gu àm le clò bog, tioramamp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents. Ensure power is off before cleaning.
• Sgrùdadh: Annually inspect the fixture for any signs of damage, loose connections, or wear. Ensure all seals remain intact to maintain weather resistance.
• Ath-shuidheachadh LED: LEDs are integrated and not user-replaceable. The long lifespan minimizes the need for replacement.

Figure 4: The B17 LED Bollard Light offers a long 50,000-hour operational lifespan.

7. A ’dèanamh trioblaid

8. Sònrachaidhean

9. Barantas agus Taic

For warranty information and technical support, please contact RAB Lighting directly. Refer to the official RAB Lighting weblàrach-lìn no na sgrìobhainnean ceannach agad airson teirmichean barantais sònraichte agus fiosrachadh conaltraidh.

RAB Lighting Contact: www.rablighting.com