FULEN WL04 Motion Sensor Wall Light Instruction Manual

1. Toradh thallview

The FULEN WL04 Motion Sensor Wall Light is a versatile, rechargeable LED sconce designed for indoor use. It features smart motion sensing, remote control operation, adjustable brightness, and three color temperature options to enhance any living space.

Prìomh fheartan:

• Braitear Gluasad Glic: Automatically illuminates when motion is detected in dark environments, turning off after 30 seconds of inactivity.
• Large Capacity 5000mAh Rechargeable Battery: Provides extended operation, up to 10 hours at maximum brightness or 60 days in motion sensor mode.
• Smachd iomallach goireasach: Adjust settings from up to 22 feet away, including power, mode, brightness, and color temperature.
• 3 Color Temperatures & Adjustable Brightness: Choose between Cold White, Natural White, and Warm White, with 5 brightness levels up to 300 lumens.
• Stàladh furasta: Offers two installation methods: adhesive stickers for smooth surfaces or expansion screws for a more permanent fixture.

2. Setup agus Stàladh

The FULEN WL04 wall light offers flexible installation options to suit your needs. Ensure the mounting surface is clean and dry before installation.

Dòighean stàlaidh:

1. Adhesive Sticker Installation (for smooth walls):
   • Peel off the protective film from the adhesive sticker on the back of the mounting base.
   • Firmly press the base onto the desired smooth wall surface. Ensure the 'UP' arrow on the base points upwards.
   • Align the wall light with the mounted base and slide it down until it clicks securely into place.
2. Screw Installation (for all wall types):
   • Mark the desired installation location on the wall.
   • Drill two holes at the marked points, matching the screw holes on the mounting base.
   • Insert the provided expansion screws into the drilled holes.
   • Secure the mounting base to the wall using the screws. Ensure the 'UP' arrow on the base points upwards.
   • Align the wall light with the mounted base and slide it down until it clicks securely into place.

3. Stiùireadh Obrachaidh

The FULEN WL04 wall light can be operated using its integrated buttons or the included remote control.

A 'cleachdadh an smachd iomallach:

The infrared remote control allows you to manage the light's functions from up to 22 feet away. (Requires two AAA batteries, not included for the remote control).

• Putan Cumhachd: Turns the light On or Off.
• Atharrachadh soilleireachd: Use the '+' and '-' buttons to cycle through 5 brightness levels.
• Taghadh teòthachd dath: Press the color temperature button to switch between Cold White (6000K), Natural White (4500K), and Warm White (3000K).
• Gnìomh timer: Set the light to automatically turn off after 10 or 30 minutes.
• Taghadh Modh:
  • 'On' Mode: Keeps the light continuously on.
  • 'Auto' Mode (Motion Sensor): Tionndaidhidh an solas air gu fèin-ghluasadach nuair a lorgar gluasad ann an àrainneachd dhorcha agus tionndaidhidh e dheth às deidh 30 diogan gun ghnìomhachd sam bith.

Manual Operation (On-device buttons):

The light also features buttons on its base for basic control:

• Suidse Cumhachd/Modh: A slider switch to select ON, AUTO, or OFF modes.
• Putan teòthachd dath: Press to cycle through the three color temperatures.
• Putan Gile: Brùth fada gus ìrean soilleireachd atharrachadh.

4. Cosgais agus Beatha Bataraidh

The FULEN WL04 is equipped with a high-capacity rechargeable battery for cordless convenience.

• A' cur cosgais: Use the provided USB-C charging cable to recharge the internal 5000mAh battery. A full charge typically takes approximately 5 hours.
• Comharra Bataraidh: The light features an indicator to show charging status (e.g., red for charging, green for fully charged).
• Beatha bataraidh: Enjoy up to 10 hours of continuous lighting at maximum brightness, or up to 60 days when operating in motion sensor mode.

5. Cumail suas

To ensure optimal performance and longevity of your FULEN WL04 wall light, follow these simple maintenance guidelines:

• Glanadh: Wipe the surface of the light with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish.
• Cùram Bataraidh: For best battery life, avoid completely draining the battery frequently. Recharge the light when the battery indicator suggests it is low. If storing for an extended period, charge the battery to about 50% and recharge every few months.
• Cumail suas sensor: Keep the motion sensor lens clean and free from dust or obstructions to ensure accurate detection.

6. A ’dèanamh trioblaid

If you encounter any issues with your FULEN WL04 wall light, refer to the following common troubleshooting steps:

• Solas gun tionndadh air:
  • Thoir sùil a bheil am bataraidh làn-luchdaichte. Ath-luchdaich ma tha sin riatanach.
  • Ensure the mode switch is set to 'On' or 'Auto'.
  • If in 'Auto' mode, verify the environment is dark enough and motion is within the sensor's range (approx. 11 feet, 120° wide-angle).
• Sensor Gluasad Gun Obrachadh:
  • Confirm the light is in 'Auto' mode.
  • Dèan cinnteach gu bheil lionsa an sensor glan agus gun bhacadh.
  • Test in a completely dark environment, as the sensor may not activate in well-lit conditions.
• Smachd Iomallach Gun a bhith a’ freagairt:
  • Thoir sùil air na bataraidhean AAA anns an smachd iomallach agus cuir nan àite iad.
  • Ensure there are no obstructions between the remote and the light's infrared receiver.
  • Make sure you are within the effective range (6-7 meters / 22 feet).
• Bidh solas a’ priobadh no a’ crìonadh gun dùil:
  • The battery may be low. Recharge the light fully.

7. Sònrachaidhean

8. Barantas agus Taic

FULEN is committed to providing high-quality products and excellent customer service. Your WL04 Motion Sensor Wall Light comes with an extended warranty.

If you have any questions about your product, require assistance with setup or operation, or experience any quality issues, please do not hesitate to contact the FULEN support team. We aim to respond and resolve your concerns within 24 hours to ensure your complete satisfaction.

For support, please refer to the contact information provided with your product packaging or visit the official FULEN weblàrach.