FLYLINKTECH 5000A Jump Starter User Manual

1. Ro-ràdh

Thank you for choosing the FLYLINKTECH 5000A Jump Starter. This portable device is designed to provide instant power to jump-start 12V vehicles, charge electronic devices, and offer emergency lighting. Please read this manual thoroughly before use to ensure safe and optimal performance.

2. Fiosrachadh Sàbhailteachd Cudromach

• Always ensure the jump starter is fully charged before use.
• Na feuch ri bataraidh reòta a thòiseachadh le leum-thòiseachadh.
• Ceangail an clamps correctly: red to positive (+), black to negative (-). Reverse polarity can cause damage.
• Na ceangail an cl dearg is dubhamps còmhla.
• Cùm a-mach à ruigsinn chloinne.
• Cleachd ann an àite le deagh fhionnarachadh.
• Seachain an inneal a nochdadh gu fìor theodhachd no solas dìreach airson amannan fada.
• If the device becomes excessively hot during use, disconnect it immediately.
• Thoir sùil air leabhar-làimhe sealbhadair do charbaid airson modhan-obrach sònraichte airson leum-tòiseachaidh.

3. Pasgan-susbaint

Dèan cinnteach gu bheil a h-uile rud anns a’ phacaid agad:

• FLYLINKTECH 5000A Jump Starter (Model BD10)
• Càbaill geansaidh glic
• Càball cosgais USB-C
• Cùis stòraidh EVA
• Leabhar-làimhe cleachdaiche

Image: Contents of the FLYLINKTECH 5000A Jump Starter package, including the jump starter unit, smart jumper cables, USB-C charging cable, and EVA storage case.

4. Toradh thallview

Familiarize yourself with the components and ports of your jump starter:

Ìomhaigh: Mion-fhiosrachadh view of the jump starter showing the LED display, LED flashlight, power button, switch button, USB1 5V/2.4A output port, USB2 Quick Charge 3.0 output port, Jump Start Socket, and 5V/2A USB-C input port.

• Taisbeanadh LED: A ’sealltainn percen bataraidhtage.
• Flashlight LED: A’ toirt seachad solais le iomadh modh.
• Putan Cumhachd: Activates the device and controls flashlight modes.
• Putan tionndaidh: Prìomh smachd cumhachd.
• Toradh USB1 (5V/2.4A): Port cosgais USB àbhaisteach.
• USB2 Output (QC3.0): Quick Charge 3.0 port for faster charging.
• Jump Start Socket: A’ ceangal ris na càbaill geansaidh snasail.
• USB-C Input (5V/2A): Used to recharge the jump starter.

5. A’ cur cosgais air an inneal-tòiseachaidh leum

Before first use, fully charge the jump starter. It is recommended to recharge the unit every 3-6 months to maintain battery health.

1. Connect the provided USB-C charging cable to the USB-C input port on the jump starter.
2. Connect the other end of the USB-C cable to a 5V/2A USB wall adapter (not included) or a car charger.
3. The LED display will show the charging progress. The unit is fully charged when the display shows 100%.

Image: The jump starter connected via USB to charge a smartphone and a tablet, demonstrating its power bank functionality.

6. Jump Starting Your Vehicle

Follow these steps carefully to safely jump-start your 12V vehicle:

1. Prepare the Jump Starter: Ensure the jump starter is at least 50% charged. Turn off your vehicle's ignition and all accessories (headlights, radio, etc.).
2. Connect Smart Jumper Cables: Insert the blue plug of the smart jumper cables into the Jump Start Socket on the jump starter. Ensure a firm connection. The indicator light on the smart clamp will flash red and green.
3. Connect to Vehicle Battery:
   • Ceangail an dearg (+) clòamp to the positive terminal of your vehicle's battery.
   • Ceangail an dubh (-) clòamp to the negative terminal of your vehicle's battery.

   Once connected correctly, the indicator light on the smart clamp tionndaidhidh e uaine cruaidh.

4. Tòisich an càr: Go into your vehicle and start the engine. If the vehicle does not start immediately, wait 30 seconds and try again. If it still doesn't start, press the "BOOST" button on the smart clamp for 3 seconds until the green light turns solid, then try starting the car again within 30 seconds.
5. Remove Cables: Once the engine starts, immediately remove the smart jumper cables from the vehicle battery, then disconnect them from the jump starter.

Image: Visual guide for jump-starting: 1. Insert jump clamp into booster. 2. Connect clamps to car battery. 3. Start your car. 4. Remove clamps.

Image: The smart clamps connected to the jump starter, illustrating the 10-layer safety protections including short circuit, reverse charge, over charge, reverse polarity, over discharge, over current, reverse connection, and high temperature protection.

7. A’ cleachdadh mar bhanca cumhachd

The jump starter can also be used to charge your electronic devices.

1. Connect your device's USB charging cable to either the USB1 (5V/2.4A) or USB2 (QC3.0) output port on the jump starter.
2. Tòisichidh an leum-tòiseachaidh a’ cur cosgais air an inneal agad gu fèin-ghluasadach.
3. The LED display will show the remaining battery capacity of the jump starter.

Image: The jump starter functioning as a portable power bank, with two USB output ports (5V/2.4A and Quick Charge 3.0) actively charging a smartphone and a tablet.

8. A’ cleachdadh an lòchran LED

The built-in 600-lumen LED flashlight has three modes for various situations:

1. Gus tionndadh air / dheth: Press and hold the LED button for 3 seconds.
2. Gus modhan rothaireachd: Once the light is on, short press the LED button to switch between:
   • Constant Air: Airson soillseachadh coitcheann.
   • Modh SOS: Flashes the international SOS signal for emergencies.
   • Modh Strobe: Rapid flashing for warning or signaling.

Image: The jump starter with its LED flashlight active, illustrating the three available modes: standard flashlight, SOS signal, and strobe light for emergencies.

9. Cumail suas

• Glanadh: Wipe the unit with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Stòradh: Store the jump starter in its EVA case in a cool, dry place away from direct sunlight. Ensure it is charged to at least 50% before storing for extended periods. Recharge every 3-6 months.
• Cùram Bataraidh: The internal lithium-ion battery is designed for long life. Avoid fully discharging the unit frequently.

Water-resistant design.

Rugged ABS shell for drop resistance.

Operates in extreme temperatures (-4°F to 140°F).

10. A ’dèanamh trioblaid

11. Sònrachaidhean

12. Barantas agus Taic

The FLYLINKTECH 5000A Jump Starter comes with an industry-leading Barantas 3-bliadhna bho cheann-latha a’ cheannaich. Tha am barantas seo a’ còmhdach lochdan saothrachaidh agus a’ dèanamh cinnteach à coileanadh earbsach.

For technical support, warranty claims, or any questions regarding your product, please contact FLYLINKTECH customer service through the retailer's platform or visit our official weblàrach.

Cùm dearbhadh do cheannach airson dearbhadh barantais.