HPBS 5000A Tire Inflator & 3000A Car Jump Starter User Manual

Ro-ràdh

Thank you for choosing the HPBS 5000A Tire Inflator and 3000A Car Jump Starter. This comprehensive device is designed to provide reliable roadside assistance for various vehicles, combining the essential functions of a powerful jump starter, a precise tire inflator, an LED flashlight, and a portable power bank. Please read this manual thoroughly before operating the device to ensure safe and efficient use.

Image: The HPBS 5000A Tire Inflator (right) and 3000A Car Jump Starter (left) shown together, highlighting their compact design.

Fiosrachadh Sàbhailteachd

Cùm na ceumannan sàbhailteachd a leanas an-còmhnaidh gus casg a chur air dochann no milleadh air an inneal agus air a’ charbad:

• Cùm an inneal air falbh bho chlann.
• Na cuir an inneal fo uisge no teòthachd anabarrach.
• Dèan cinnteach gu bheil fionnarachadh ceart ann rè obrachadh agus cosgais.
• Na feuch ris an inneal a thoirt às a chèile no atharrachadh.
• Use only the provided accessories and cables.
• Avoid short-circuiting the jump starter clamps.
• Cuir ort dìon-sùla nuair a bhios tu ag obrachadh an inneal-tòiseachaidh leum.
• Do not over-inflate tires; always refer to the vehicle's recommended tire pressure.

Image: Visual representation of the 10 built-in safety protections, including spark resistance, over-charge, over-current, short-circuit, over-heat, extreme temperature, over-voltage, reverse connection, reverse polarity, and over-discharge protection.

Bathar seachadview

Co-phàirtean agus feartan

The HPBS 5000A Tire Inflator and 3000A Car Jump Starter are designed for versatility and ease of use.

Tòisichidh leum càr 3000A

• EC5 Output Port: For connecting smart jump cables.
• Putan AIR / OFF: A 'toirt cumhachd don inneal.
• Flashlight LED: Provides illumination with Normal, Strobe, and SOS modes.
• Puirt Toraidh USB (USB1, USB2): Airson innealan taobh a-muigh a ghearradh.
• Port a-steach USB-C: Airson an aonad tòiseachaidh leum a luchdadh.
• Solais comharra: Show battery level and status.
• Taisbeanadh didseatach: A ’sealltainn percen bataraidhtage.

Ìomhaigh: Dlùth-shealladh view of the 3000A Jump Starter, labeling the EC5 Output Port, ON/OFF Button, LED Flashlight, USB Output 1, USB-C Input, USB Output 2, and Indicator Lights.

5000A Tire Inflator

• Inflator Interface: For connecting the air hose.
• Star Output Port: (Likely a DC output for specific accessories, or mislabeled from jump starter)
• Sgrion Taisbeanaidh: Shows current pressure, target pressure, and unit.
• Preset Air Pressure Plus Key (+): A’ meudachadh cuideam targaid.
• Mode/Unit Switching Button: Toggles between PSI, KPA, BAR, Kg/cm² and preset modes (car, motorcycle, bicycle, ball).
• Power Supply/Inflation Start Button: Initiates or stops inflation.
• Putan Solais: Activates the LED light.
• Preset Air Pressure Key Reduction (-): A’ lughdachadh cuideam targaid.
• Solais LED: Built-in light for visibility.
• Port toraidh USB: Airson innealan taobh a-muigh a ghearradh.
• Port a-steach Type-C: For charging the inflator unit.

Ìomhaigh: Dlùth-shealladh view of the 5000A Tire Inflator, labeling the display screen, preset air pressure keys, mode/unit button, power/inflation button, lighting button, LED lighting, USB output port, Type-C input port, inflator interface, and star output port.

Suidhich

Cìs tòiseachaidh

Before first use, fully charge both the 5000A Tire Inflator and the 3000A Car Jump Starter.

1. Connect the provided USB-C charging cable to the Type-C Input Port on each device.
2. Ceangail ceann eile a’ chàball ri inneal-atharrachaidh balla USB (nach eil air a ghabhail a-steach) no ri port USB le cumhachd.
3. The digital display on each device will indicate the charging status. Charge until the display shows 100%.

It is recommended to fully charge the devices every 3-6 months, even when not in use, to maintain battery health.

Stiùireadh Obrachaidh

Using the 3000A Car Jump Starter

This jump starter is designed to safely start vehicles with dead batteries.

1. Ensure the jump starter is at least 50% charged.
2. Connect the smart jump cable's blue end into the EC5 Output Port of the jump starter.
3. Ceangail an cl deargamp chun an ceann-uidhe dheimhinneach (+) air bataraidh a’ charbaid.
4. Ceangail an dubh clamp chun an teirmeanail àicheil (-) de bhataraidh a’ charbaid.
5. Dèan cinnteach gu bheil an clamps are securely attached and there is no corrosion.
6. Tòisich einnsean a’ charbaid.
7. Once the engine starts, immediately remove the clamps from the vehicle battery, first the black (-) clamp, an uairsin an clò dearg (+)amp.
8. Disconnect the smart jump cable from the jump starter.

Cudromach: If the vehicle does not start on the first attempt, wait at least 30 seconds before trying again. Do not attempt more than 3 consecutive starts.

Image: The HPBS 3000A Jump Starter connected to a car battery with its red and black clamps, demonstrating its use for jump-starting a vehicle.

Image: The HPBS 3000A Jump Starter connected to a car battery, illustrating its capability to jump-start various vehicle types including vans, pick-ups, SUVs, motorboats, motorcycles, and lawn mowers.

Using the 5000A Tire Inflator

Inflate tires and other inflatables with precision.

1. Connect the air hose to the Inflator Interface on the device.
2. Screw the air hose nozzle onto the tire valve stem.
3. Press the Mode/Unit Switching Button to select the desired unit (PSI, KPA, BAR, Kg/cm²) and preset mode (car, motorcycle, bicycle, ball).
4. Use the Preset Air Pressure Plus (+) and Minus (-) keys to set the target pressure. Refer to your vehicle's manual or door jamb sticker for recommended tire pressure.
5. Press the Power Supply/Inflation Start Button to begin inflation. The device will automatically stop when the target pressure is reached.
6. Unscrew the air hose nozzle from the tire valve stem and disconnect the hose from the inflator.

Image: The HPBS 5000A Tire Inflator connected to a car tire, demonstrating its cordless operation and pressure detection capability.

Using the LED Flashlight (Both Devices)

Both the jump starter and tire inflator feature an integrated LED flashlight.

• On the 3000A Jump Starter, press and hold the ON/OFF button to activate the flashlight. Press again to cycle through Normal, Strobe, and SOS modes. Press and hold to turn off.
• On the 5000A Tire Inflator, press the Lighting Button to activate the flashlight. Press again to cycle through modes (if applicable). Press again to turn off.

Using as a Portable Power Bank (Both Devices)

Both devices can charge your electronic gadgets.

• Connect your device's USB charging cable to one of the USB Output Ports on the jump starter or tire inflator.
• Tòisichidh an inneal a’ cur cosgais air gu fèin-ghluasadach.

Image: The HPBS 3000A Jump Starter functioning as a 74WH portable power bank, charging a mobile phone and a tablet simultaneously.

Cumail suas

• Glanadh: Sguab na h-innealan le clò bog, tioram. Na cleachd ceimigean cruaidh no innealan-glanaidh sgrìobach.
• Stòradh: Stòraich na h-innealan ann an àite fionnar, tioram, air falbh bho sholas dìreach na grèine agus teòthachd anabarrach.
• A' cur cosgais: Recharge the devices every 3-6 months to maintain battery life, even if not used.
• Cùram càball: Dèan sgrùdadh air càbaill agus clamps for damage before each use. Replace if frayed or damaged.

Fuasgladh thrioblaidean

Sònrachaidhean

• Brand: HPBS
• Àireamh Modail: 4726f0d1-c453-4aaa-b8f1-1288963ca631
• Jump Starter Peak Current: 3000A
• Tire Inflator Pressure: Suas gu 150 PSI
• Comas bataraidh: Approx. 74WH (for power bank function)
• Teachd a-steach: USB-C
• Toradh: USB-A (for charging devices), EC5 (for jump starting)
• Seòrsa Seirbheis Carbaid: Carbadan
• Ceann-latha ri fhaighinn an toiseach: 21 Samhain, 2024

Barantas agus Taic

For warranty information and technical support, please refer to the product packaging or contact HPBS customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official HPBS store on Amazon: HPBS Store