1byone All-in-One Record Player User Manual

Stiùireadh sàbhailteachd cudromach

Leugh a h-uile stiùireadh gu faiceallach mus cleachd thu an toradh seo. Cùm an leabhar-làimhe seo airson fiosrachadh san àm ri teachd.

• Na cuir an aonad fosgailte do uisge, taiseachd no teòthachd anabarrach.
• Dèan cinnteach gu bheil fionnarachadh ceart ann timcheall an aonaid. Na cuir bacadh air fosglaidhean fionnarachaidh sam bith.
• Na cleachd ach ceanglachan / goireasan a chaidh a shònrachadh leis an neach-dèanamh.
• Unplug an aonad aig àm stoirmean dealanach no nuair nach eilear ga chleachdadh airson amannan fada.
• Thoir iomradh air a h-uile seirbheis gu luchd-seirbheis le teisteanas.
• Na feuch ris an aonad a thoirt às a chèile no atharrachadh.

Ro-ràdh

The 1byone LP03A All-in-One Record Player offers a high-fidelity vinyl listening experience with integrated features for modern connectivity. This belt-drive turntable includes built-in stereo speakers, a magnetic AT-3600L cartridge, and a built-in preamplifier. It also supports wireless audio input via Bluetooth 5.4 and wired connections through an Aux-in port and RCA line output.

Figure 1: The 1byone LP03A All-in-One Record Player.

Susbaint pacaid

Dèan cinnteach gu bheil na nithean gu lèir a tha air an liostadh gu h-ìosal air an toirt a-steach don phacaid agad:

• 1byone LP03A Record Player Unit
• Còmhdach Dust
• Platter with Drive Belt (pre-installed or separate)
• Frith-chuideam
• Cuideam anti-skate
• Adapter cumhachd
• Leabhar-làimhe stiùiridh

Bathar seachadview

Familiarize yourself with the components and controls of your record player.

Aghaidh agus mullach View

Figear 2: Aghaidh agus Mullach View of the Record Player.

1. Platter: A’ toirt taic don chlàr vinyl.
2. Tonearm: A ’cumail a’ chairt agus an stoidhle.
3. Cartridge (AT-3600L): A’ leughadh claisean a’ chlàir.
4. Frith-chuideam: A’ cothromachadh a’ ghàirdean-tòin agus a’ atharrachadh feachd tracadh.
5. Anti-skate Weight: Prevents the tonearm from drifting inward.
6. Tagraiche astair: Switches between 33 1/3 and 45 RPM.
7. Cnap Meud/Modh: Controls volume and selects input mode (Phono, Bluetooth, Aux).
8. Luchd-labhairt Togte: Toradh claisneachd amalaichte.
9. Còmhdach dust: A’ dìon a’ phlàta agus a’ ghàirdean-tòna bho dhuslach.

Ceanglaichean Pannal Cùil

Figear 3: Ceanglaichean a’ Phannal Chùil.

1. Phono/Line-Out Switch: Selects between Phono (unpreamplified) and Line (preamplified) output for RCA jacks.
2. RCA Jacks (R-RCA-L): Airson ceangal ri inneal taobh a-muigh ampluchd-labhairt no luchd-labhairt cumhachd.
3. AUX ANN AN Jack: Airson innealan claisneachd taobh a-muigh a cheangal tro chàball 3.5mm.
4. Terminal talmhainn: For connecting a ground wire to an external amplifier gus lughdachadh a dhèanamh air sèid.
5. Atharraich Pitch: Fine-tunes playback speed.
6. DC ann an 12V: Cuir a-steach cumhachd airson an inneal-atharrachaidh a tha air a ghabhail a-steach.

Volume/Mode Knob

Figure 4: Volume and Mode Knobs.

Suidhich

Follow these steps to set up your record player for the first time.

1. Stàladh a’ Phlàta agus a’ Chrios

Figure 5: Platter Spindle and Motor Pulley.

• Carefully place the platter onto the center spindle.
• Locate the drive belt (usually pre-installed under the platter or in the packaging).
• If not pre-installed, gently stretch the drive belt around the motor pulley and the inner rim of the platter. Ensure the belt is flat and not twisted.

2. Cartridge and Stylus

The 1byone LP03A comes with a pre-installed Audio-Technica AT-3600L magnetic cartridge. Ensure the stylus guard is removed before playback.

Figure 6: Audio-Technica AT-3600L Cartridge.

3. Tonearm Balance and Tracking Force Adjustment

Properly balancing the tonearm and setting the tracking force is crucial for optimal sound quality and to prevent damage to your records and stylus.

Figure 7: Adjustable Counterweight.

1. Cothromachadh neoni air a’ ghàirdean-tòna:
   • Place the record player on a level surface.
   • Thoir air falbh an dìonadair stylus.
   • Lower the tonearm lift lever.
   • Gently release the tonearm clamp.
   • Rotate the counterweight at the rear of the tonearm until the tonearm is perfectly balanced horizontally, floating freely.
2. Suidhich Feachd Tracadh:
   • Once balanced, hold the counterweight steady with one hand and rotate only the numbered ring on the front of the counterweight until '0' aligns with the center line on the tonearm.
   • Rotate the entire counterweight (including the numbered ring) counter-clockwise until the desired tracking force is reached. For the AT-3600L cartridge, the recommended tracking force is typically 3.5 grams.

4. Anti-skate Adjustment

The anti-skate mechanism prevents the tonearm from being pulled towards the center of the record. Attach the anti-skate weight's loop to the second groove of the anti-skate post for the recommended setting.

5. Stàladh Còmhdach Duslach

Insert the hinges of the dust cover into the corresponding slots on the rear of the record player.

6. Ceangal Cumhachd

Connect the power adapter to the DC IN 12V port on the rear panel of the record player, then plug it into a wall outlet.

Obrachaidh

A’ cluich Vinyl Record

1. Cuir clàr air a’ chlàr.
2. Select the appropriate speed (33 1/3 or 45 RPM) using the speed selector switch.
3. Ensure the stylus guard is removed.
4. Tog an tonearm a’ cleachdadh an luamhan togail tonearm.
5. Manually position the tonearm over the desired track of the record.
6. Gently lower the tonearm using the lift lever. The stylus will make contact with the record and playback will begin.
7. Adjust the volume using the Volume/Mode knob.
8. To stop playback, lift the tonearm, return it to the tonearm rest, and secure it with the clamp.

Cuir a-steach Bluetooth

The record player can receive audio wirelessly from Bluetooth-enabled devices.

Figure 8: Wireless Bluetooth Input.

1. Turn on the record player.
2. Rotate the Volume/Mode knob to select Bluetooth mode (indicated by a blue LED).
3. Enable Bluetooth on your smartphone, tablet, or computer and search for "1byone LP03A".
4. Select the device to pair. Once connected, you can stream audio to the record player's built-in speakers.

Ceangal Aux-in

Connect external audio sources using a 3.5mm audio cable to the AUX IN jack on the rear panel.

1. Connect one end of a 3.5mm audio cable to your external device (e.g., MP3 player).
2. Connect the other end to the AUX IN jack on the record player.
3. Rotate the Volume/Mode knob to select Aux-in mode.
4. Adjust volume from both the record player and the external device.

Ceangal loidhne-a-mach RCA

Use the RCA Line Out to connect the record player to an external ampluchd-labhairt no luchd-labhairt cumhachd.

1. Determine if your external amplifier has a dedicated PHONO input.
2. Ma tha do amplifier has a PHONO input, set the Phono/Line-Out switch on the record player's rear panel to Fòn. Connect the RCA cables from the record player to the PHONO input of your amplifier. Connect a ground wire from the record player's ground terminal to your ampceann-uidhe talmhainn an neach-lìbhrigidh ma tha e ri fhaighinn.
3. Ma tha do ampnì an neach-togail NACH EIL have a PHONO input, set the Phono/Line-Out switch on the record player's rear panel to LINN. Connect the RCA cables from the record player to any standard LINE input (e.g., AUX, CD, TAPE) on your amplosgadair.
4. Adjust the volume on your external amplifier. The record player's internal volume control will not affect the RCA output.

Atharrachadh pitch

The Pitch Adjust knob on the rear panel allows for fine-tuning the playback speed. Rotate it slightly to increase or decrease the speed as needed.

Cumail suas

Regular maintenance ensures the longevity and optimal performance of your record player.

A 'glanadh an Stylus

• Always clean the stylus from back to front using a soft brush designed for stylus cleaning.
• Do not use excessive force or clean from side to side, as this can damage the stylus.
• Replace the stylus when signs of wear are visible (e.g., distorted sound, skipping).

A ’glanadh a’ chlàr-tionndaidh

• Sguab an aonad le clò bog, tioram.
• Do not use harsh chemicals, cleaning solvents, or abrasive cleaners.
• Keep the platter and tonearm free of dust and debris.

Dust Cover Care

Clean the dust cover with a soft, lint-free cloth. Avoid using abrasive materials that could scratch the surface.

Fuasgladh thrioblaidean

Thoir sùil air an earrann seo airson cùisean cumanta agus na fuasglaidhean aca.

Sònrachaidhean

Technical specifications for the 1byone LP03A Record Player.

• Modail: LP03A
• Seòrsa Drive: Slighe crios
• Luas: 33 1/3, 45 RPM
• Cartridge: Audio-Technica AT-3600L (Magnetic)
• Togte roamplosgadair: Tha
• Luchd-labhairt: Luchd-labhairt Stereo togte
• Ceangal gun uèir: Bluetooth 5.4
• Cur a-steach: Taobh a-staigh (3.5mm)
• Toraidhean: RCA Line Out (Switchable Phono/Line)
• Solar cumhachd: DC 12V
• Meudan (approx.): 17.32 x 14.09 x 7.4 òirleach (L x W x H)
• Cuideam (approx.): 17.16 not

Figear 9: Meudan an toraidh.

Barantas agus Taic

Your 1byone LP03A Record Player is covered by a comprehensive warranty and return policy.

• Barantas: 36 Mios
• Poileasaidh Tilleadh: 90 Là
• Taic teachdaiche: Airson cuideachaidh, cuir fios thugainn aig ushelp@1byonebros.com.