YESWELDER FLUX-135 MINI 135Amp 3-in-1 Welder Instruction Manual

1. Toradh thallview

The YESWELDER FLUX-135 MINI is a versatile 135Amp 3-in-1 welding machine designed for various welding tasks. It supports Flux Core Gasless MIG, Stick, and Lift TIG welding processes. This machine is suitable for both beginners and experienced welders due to its intuitive controls and synergic features.

Figear 1: Aghaidh view of the YESWELDER FLUX-135 MINI welding machine.

Prìomh fheartan:

• Multi-Process Capability: Supports Flux Core Gasless MIG, Stick, and Lift TIG welding.
• Synergic Control: Automatically matches recommended voltage when adjusting wire feed speed for optimized welding parameters.
• Obrachadh furasta: Intuitive control panel for straightforward adjustment of welding modes, voltage, and current/wire feed speed.
• Dealbhadh Compact: Mini size for portability and convenience.

Figure 2: The 3-in-1 multi-function welding machine illustrating Flux Cored, Lift TIG, and Stick welding capabilities.

2. Fiosrachadh Sàbhailteachd

Welding can be hazardous. Always follow safety precautions to prevent injury or damage. Read and understand all safety warnings and instructions before operating this equipment.

Earalas Sàbhailteachd Coitcheann:

• Sioc Dealain: Can kill. Do not touch live electrical parts. Wear dry welding gloves and protective clothing. Ensure the welding machine is properly grounded.
• Fumes agus gas: Can be hazardous to your health. Keep your head out of the fumes. Use ventilation or exhaust to remove fumes from the breathing zone and general area.
• Arc Rays: Can burn eyes and skin. Wear a welding helmet with a proper shade filter and protective clothing.
• Teine agus spreadhadh: Welding sparks and hot metal can cause fires. Keep flammable materials away from the welding area. Have a fire extinguisher nearby.
• Pàirtean teth: Can cause severe burns. Allow equipment to cool before touching.
• Fuaim: Faodaidh cus fuaim cron a dhèanamh air èisteachd. Cuir ort dìon-cluaise.
• Raon obrach: Keep the work area clean, dry, and free from clutter. Ensure adequate lighting.

3. Setup agus Stàladh

3.1 Ceangal cumhachd

Connect the welder to a standard 110V AC power outlet. Ensure the power source is capable of providing sufficient current for the welding operations.

3.2 Welding Wire Installation (Flux Core MIG)

1. Open the wire feeder compartment.
2. Place a 2LB (4-inch spool diameter) welding wire spool onto the spindle. The FLUX-135 MINI is compatible with .030"/.08mm flux cored wire.
3. Thread the wire through the guide tube and into the drive roller mechanism.
4. Close the drive roller tension arm and adjust the tension appropriately.
5. Feed the wire through the MIG torch liner until it exits the nozzle.

Figure 3: Installation of a 2LB gasless flux cored welding wire spool.

3.3 Electrode/Torch Connections

• Tàthadh MIG: The MIG torch is typically pre-connected. Ensure the ground clamp is securely attached to the workpiece.
• Stick Welding: Ceangail an neach-gleidhidh electrod ris a’ cheann-uidhe dheimhinneach (+) agus an ceangal talmhainnamp to the negative (-) terminal for most common electrodes. Refer to electrode manufacturer specifications.
• Tàthadh TIG Tog suas: An additional Lift TIG torch (not included) is required. Connect the TIG torch to the negative (-) terminal and the ground clamp chun cheann-uidhe adhartach (+).

4. Stiùireadh Obrachaidh

4.1 Pannal Smachd Os a chionnview

The FLUX-135 MINI features a simple and intuitive control panel. It includes a digital display, mode selection knob, and adjustment knobs for voltage/current and wire feed speed.

Figear 4: Mionaideach view of the control panel, highlighting synergic control and efficiency.

4.2 Taghadh Modh

Use the mode selection knob to choose between Flux MIG, Stick, or Lift TIG welding processes.

4.3 Synergic Control and Parameter Adjustment

The synergic control feature simplifies parameter setting. When operating in Flux MIG mode, adjusting the wire feed speed knob will automatically suggest the corresponding voltage for optimal welding performance. For Stick and Lift TIG modes, the knobs will adjust current (amplinn).

4.4 Welding Processes

• Flux Core Gasless MIG Welding:
  This mode uses flux-cored wire, eliminating the need for external shielding gas. Select Flux MIG mode, set your wire feed speed (voltage will adjust synergically), and begin welding. Ensure proper stick-out and travel speed for best results.
• Stick Welding (SMAW):
  Select Stick mode. Insert the appropriate electrode into the electrode holder. Adjust the current (amperage) based on the electrode type and material thickness. Maintain a consistent arc length and travel speed.
• Lift TIG Welding (GTAW):
  Note: Requires an additional Lift TIG torch (not included). Select Lift TIG mode. Connect the TIG torch and ground clamp as described in Section 3.3. Use ER70S-6 mild steel TIG welding rods for fabrication of mild steel. Initiate the arc by gently touching the tungsten electrode to the workpiece and then lifting it slightly. Adjust current (amperage) as needed.
  

  Figure 5: YESWELDER ER70S-6 mild steel TIG welding rods.
  

  Figure 6: ER70S-6 TIG welding rods available in 1/16", 3/32", and 1/8" diameters, all 16" long.

  

  Figure 7: An operator performing Lift TIG welding.

5. Cumail suas

Bidh cumail suas cunbhalach a’ dèanamh cinnteach gum mair an inneal tàthaidh agad fad-beatha agus gum bi e ag obair gu math.

5.1 Glanadh

• Periodically clean the exterior of the machine with a dry, soft cloth.
• Use compressed air to blow out dust and debris from the cooling vents. Ensure the machine is unplugged before cleaning.

5.2 Cable and Connection Inspection

• Regularly inspect all welding cables, torch leads, and ground clamps for signs of wear, damage, or loose connections. Replace damaged components immediately.
• Dèan cinnteach gu bheil a h-uile ceangal dealain teann agus tèarainte.

5.3 Wire Feeder Maintenance (MIG)

• Clean the drive rollers and wire guide tubes to prevent wire feeding issues.
• Check the MIG torch liner for blockages or wear. Replace if necessary.

6. A ’dèanamh trioblaid

Tha an earrann seo a’ toirt seachad fuasglaidhean air cùisean cumanta a dh’ fhaodadh tu a thighinn tarsainn orra.

Ma thachras tu ri cùisean nach eil air an liostadh an seo no ma mhaireas an duilgheadas, cuir fios gu taic luchd-cleachdaidh.

7. Sònrachaidhean

Technical specifications for the YESWELDER FLUX-135 MINI.

8. Fiosrachadh Barantais

This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official YESWELDER weblàrach-lìn airson teirmichean is cumhaichean barantais mionaideach. Cùm do dhearbhadh ceannach airson tagraidhean barantais.

9. Taic teachdaiche

For technical assistance, spare parts, or any inquiries regarding your YESWELDER FLUX-135 MINI, please contact YESWELDER customer support. You can typically find contact information on the official YESWELDER weblàrach-lìn no tron ​​neach-reic agad.

Goireasan air-loidhne: Tadhail air an YESWELDER Store on Amazon airson fiosrachadh agus taic toraidh.