RAB Lighting SR8 8 ft. LED Strip Fixture Instruction Manual

1. Toradh thallview

The RAB SR8 is an 8-foot LED strip fixture designed for commercial lighting applications. This fixture features field-adjustable power settings (40W, 50W, 60W) and color temperatures (3500K, 4000K, 5000K), providing flexibility to suit various lighting needs. It is 0-10V dimmable and compatible with 120-277V electrical systems, offering efficient and versatile illumination.

Figear 1.1: Thairisview of the RAB SR8 8 ft. LED Strip Fixture. This image displays the full length of the white LED strip fixture, highlighting its sleek and linear design suitable for surface mounting in commercial environments.

2. Fiosrachadh Sàbhailteachd

• RABHADH: Cunnart clisgeadh dealain. Dì-cheangail an cumhachd aig a’ fhiùs no am briseadair cuairte mus tèid a stàladh no a sheirbheiseachadh.
• Feumaidh dealanach teisteanasach an stàladh a dhèanamh a rèir a h-uile còd dealain nàiseanta is ionadail.
• Dèan cinnteach gu bheil an solar voltage is correct for the fixture (120-277V).
• Na làimhsich inneal-solais cumhachdach le làmhan fliuch.
• Na stàlaich faisg air stuthan a ghabhas losgadh.
• Chan eil an uidheam seo ach airson a chleachdadh a-staigh.

3. Setup agus Stàladh

3.1. Ro-stàladh

• Fosgail am pasgan agus thoir sùil air airson milleadh sam bith.
• Ensure all necessary components are present (LED Fixture).
• Cuir dheth an cumhachd aig a’ bhriseadair cuairte mus tòisich thu air an stàladh.

3.2. A’ cur suas an uidheam

The SR8 fixture is designed for surface mounting. Refer to the dimensional drawing for precise measurements and mounting hole locations.

Figear 3.1: Dimensional drawing of the RAB SR8 fixture. This diagram illustrates the length (94.49 inches), width (2.36 inches), and height (2.79 inches) of the fixture, along with potential mounting points.

1. Mark the desired mounting locations on the ceiling or wall, ensuring they align with the fixture's mounting points.
2. Drill appropriate holes for mounting screws (not included).
3. Secure the fixture to the mounting surface using suitable hardware.

3.3. Uèirleadh dealain

Connect the fixture to the electrical supply according to the wiring diagram below. Ensure all connections are secure and comply with local electrical codes.

Figear 3.2: Wiring diagram for the RAB SR8 LED Strip Fixture. This diagram shows the connections for Line (Black), Common (White), (+) DIMV (Purple), (-) DIMV (Pink), Vaux 12V (Red), and Ground (Ground) to the light fixture.

• Connect the black wire from the fixture to the LINE (hot) wire from the supply.
• Connect the white wire from the fixture to the COMMON (neutral) wire from the supply.
• Connect the green or bare copper wire from the fixture to the GROUND wire from the supply.
• For 0-10V dimming, connect the purple wire to (+) DIMV and the pink wire to (-) DIMV from the dimming control. If dimming is not used, cap these wires individually.
• Ensure all wire nuts or connectors are tightened securely.

4. Stiùireadh Obrachaidh

The RAB SR8 fixture allows for field adjustment of both power output and color temperature to customize lighting performance.

Figear 4.1: Faisg air làimh view of the power (W) and color temperature (CCT) adjustment switches on the RAB SR8 fixture. This image shows the physical switches used to select desired wattage and Kelvin temperature settings.

4.1. Power Adjustment (Wattage)

The fixture includes a switch to select the desired wattage output. This allows for optimization of brightness and energy consumption.

• Locate the "Power (W)" switch on the fixture.
• Tagh aon de na roghainnean a leanas: 40W, 50W, or 60W.
• Ensure power is disconnected before adjusting this switch.

4.2. Color Temperature Adjustment (CCT)

The fixture also features a switch to select the desired color temperature, allowing you to choose between different light appearances.

• Locate the "Color Temperature (CCT)" switch on the fixture.
• Tagh aon de na roghainnean a leanas: 3500K (Neutral White), 4000K (Cool White), or 5000K (Daylight).
• Ensure power is disconnected before adjusting this switch.

4.3. Gnìomhachd Dimmable

The SR8 fixture supports 0-10V dimming. When connected to a compatible 0-10V dimmer, the light intensity can be adjusted from 100% down to 10% (or lower, depending on dimmer specifications).

• Ensure the fixture is correctly wired for 0-10V dimming as per Section 3.3.
• Use a compatible 0-10V dimmer switch (sold separately) to control the light output.

5. Cumail suas

The RAB SR8 LED Strip Fixture requires minimal maintenance. Regular cleaning can help maintain optimal performance and appearance.

• Glanadh: Dì-cheangail an cumhachd mus glan thu e. Cleachd clò bog, tioram, no beagan fliuch.amp clò airson taobh a-muigh an inneil-sgudail a ghlanadh. Na cleachd innealan-glanaidh sgrìobach no fuasglaidhean.
• LEDan: Tha an stòr solais LED amalaichte air a dhealbhadh airson beatha fhada agus chan fheum e a bhith air a chur na àite.

6. A ’dèanamh trioblaid

Mura h-eil an inneal-gleidhidh ag obair mar a bha dùil, thoir sùil air na cùisean agus na fuasglaidhean cumanta a leanas:

Mura rèitich na ceumannan fuasgladh-cheistean an duilgheadas, cuir fios gu taic luchd-cleachdaidh RAB Lighting.

7. Sònrachaidhean

8. Fiosrachadh Barantais

The RAB SR8 LED Strip Fixture comes with a Limited Warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official RAB Lighting weblàrach-lìn no cuir fios chun t-seirbheis teachdaiche aca gu dìreach. Cùm dearbhadh do cheannach airson tagraidhean barantais.

9. Taic teachdaiche

For technical assistance, replacement parts, or any questions not covered in this manual, please contact RAB Lighting customer support:

• Weblàrach: www.rablighting.com
• Thoir iomradh air an website for current contact information, including phone numbers and email support.