1. Ro-ràdh
This manual provides detailed instructions for setting up, operating, and maintaining your YOOSEE KAP X330 Wireless WiFi Repeater Router. Please read this manual carefully before using the device to ensure optimal performance, extended network coverage, and safety. This device is designed to easily expand the range of your existing WLAN network or create a new access point.
2. Toradh thallview
2.1 Prìomh fheartan
- Extends the range of your WLAN network easily.
- Provides Internet access for computers located at the edge or outside the range of your main access point.
- Supports both Wireless Repeater Mode and standard Access Point (AP) Mode.
- Utilizes WLAN 802.11N for high-speed wireless access.
- Compatible with 802.11G (54 Mbps) and 802.11B (11 Mbps) standards.
- Operates on the 2.4GHz WLAN frequency.
- Ensures maximum WLAN network security with WPA2, WPA, and WEP (64/128-bit) encryptions.
- Features integrated antennas for compact design.
- Bivolt (110V / 220V) power input for versatile use.
- Supports WPS (Wi-Fi Protected Setup) for easy connection.
2.2 Susbaint a’ phacaid
- 1x YOOSEE KAP X330 Wireless WiFi Repeater Router
- 1x Leabhar-làimhe Cleachdaiche
2.3 Tuairisgeul corporra
The KAP X330 is a compact, white device designed to plug directly into a wall outlet. It features indicator lights on the front panel and an Ethernet port on the side for wired connections.

Figure 2.1: YOOSEE KAP X330 Wireless Repeater in its retail packaging and as a standalone unit. The packaging highlights its 'KAP-X330 Wireless Extender' name and 'More range for every WLAN network' slogan. The device itself is white with indicator lights and an Ethernet port visible.

Figure 2.2: A closer look at the YOOSEE KAP X330 Wireless Repeater, emphasizing its design and features. It shows the device plugged into an outlet, with indicator lights illuminated. Insets highlight the side view with an Ethernet port, the power plug, and a reset button, along with a prominent WiFi signal icon.
3. Stiùirich rèiteachaidh
3.1 A’ cur cumhachd air adhart
- Plug the KAP X330 into a standard electrical outlet within the range of your existing WiFi network (for Repeater Mode) or near your wired internet source (for AP Mode).
- Wait for the power indicator light to turn on, indicating the device is ready.
3.2 Modhan Ceangail
The KAP X330 supports two main operational modes:
- Modh ath-aithris: A’ leudachadh còmhdach lìonra gun uèir a tha ann mar-thà.
- Modh AP (Puing Ruigsinneachd): Creates a new wireless network from a wired Ethernet connection.
3.3 Configuration Steps (Repeater Mode)
- Connect to the Repeater: On your computer or smartphone, connect to the repeater's default WiFi network (SSID usually starts with 'Wireless-N' or similar, without a password).
- Ruigsinneachd Web Eadar-aghaidh: Fosgail a web brabhsair agus cuir a-steach an seòladh IP bunaiteach (me,
192.168.1.1or192.168.10.1) or the default domain name (e.g.,repeater.net). Refer to the label on the device or the quick start guide for the exact address. - Log a-steach: Enter the default username and password (commonly 'admin' for both).
- Tagh Modh Ath-aithris: On the setup page, select 'Repeater Mode'.
- Sgan airson lìonraidhean: The device will scan for available wireless networks. Select your home WiFi network from the list.
- Cuir a-steach facal-faire: Enter the password for your home WiFi network.
- Configure Extended SSID (Optional): You can choose to keep the same SSID as your main network or create a new one (e.g., 'YourNetwork_EXT').
- Sàbhail na roghainnean: Click 'Apply' or 'Save'. The repeater will restart.
- Ath-cheangal: After the restart, connect your devices to the extended WiFi network.
3.4 Configuration Steps (AP Mode)
- Ceangail Càball Ethernet: Connect an Ethernet cable from your router or modem to the LAN/WAN port on the KAP X330.
- Connect to the Repeater: On your computer or smartphone, connect to the repeater's default WiFi network (SSID usually starts with 'Wireless-N' or similar, without a password).
- Ruigsinneachd Web Eadar-aghaidh: Fosgail a web brabhsair agus cuir a-steach an seòladh IP bunaiteach (me,
192.168.1.1or192.168.10.1) or the default domain name (e.g.,repeater.net). - Log a-steach: Enter the default username and password (commonly 'admin' for both).
- Tagh Modh AP: On the setup page, select 'AP Mode'.
- Configure New Network: Set a new SSID (network name) and a strong password for your new wireless network.
- Sàbhail na roghainnean: Click 'Apply' or 'Save'. The device will restart.
- Ath-cheangal: After the restart, connect your devices to the newly created WiFi network.
3.5 Suidheachadh WPS (Suidheachadh Dìon Wi-Fi)
WPS allows for a quick and easy connection to your main router without needing to enter the password manually.
- Plug in the KAP X330 and wait for it to power on.
- Brùth am putan WPS air a’ phrìomh router agad.
- Within two minutes, press the WPS button on the KAP X330.
- The devices will automatically connect and configure the repeater. The signal indicator lights on the repeater should show a strong connection.
4. Obrachadh
4.1 Solais Comharra
The KAP X330 features several indicator lights on its front panel to provide status information:
- Cumhachd LED: A’ comharrachadh a bheil an inneal air a chumhachdachadh.
- WLAN/WiFi LED: Shows wireless activity and connection status.
- LED LAN/WAN: A’ comharrachadh gnìomhachd air a’ phort Ethernet.
- LEDan neart chomharran: (If present) Indicate the strength of the signal received from the main router in Repeater Mode. More lights usually mean a stronger signal.
4.2 Suidheachadh as Fheàrr
For best performance in Repeater Mode, place the KAP X330 halfway between your main router and the area where you need extended WiFi coverage. Avoid placing it near large metal objects, concrete walls, or other devices that emit radio frequency interference (e.g., microwaves, cordless phones).
5. Cumail suas
5.1 Glanadh
To clean the device, unplug it from the power outlet. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosol sprays.
5.2 Ùrachaidhean Firmware
Periodically check the YOOSEE official website for firmware updates. Firmware updates can improve performance, add new features, or fix bugs. Follow the instructions provided with the firmware update package carefully.
6. A ’dèanamh trioblaid
6.1 No Internet Access After Setup
- Ensure the repeater is receiving a strong signal from your main router (check signal strength LEDs).
- Verify that you entered the correct WiFi password for your main network during setup.
- Try restarting both your main router and the KAP X330.
- If in AP Mode, ensure the Ethernet cable is securely connected and your main router is providing internet.
6.2 Weak Signal or Slow Speed
- Relocate the KAP X330 closer to your main router, ensuring it's still within the desired coverage area.
- Avoid physical obstructions like thick walls or large metal objects.
- Thoir sùil airson eadar-theachd bho innealan eileagtronaigeach eile.
6.3 Chan urrainn dhomh faighinn a-steach Web Eadar-aghaidh
- Ensure your device is connected to the repeater's WiFi network (or via Ethernet if in AP mode).
- Verify the IP address or domain name entered in the browser is correct.
- Glan tasgadan do bhrabhsair no feuch brabhsair eadar-dhealaichte.
- Cuir dheth bathar-bog VPN no balla-teine sam bith air a’ choimpiutair agad airson ùine.
6.4 Ath-shuidheachadh Factaraidh
Ma thachras tu air duilgheadasan leantainneach no ma dhìochuimhnicheas tu na teisteanasan logadh a-steach agad, faodaidh tu ath-shuidheachadh factaraidh a dhèanamh:
- With the device powered on, use a paperclip or a thin object to press and hold the reset button (usually located in a small pinhole) for about 5-10 seconds.
- Release the button when the indicator lights flash or the device restarts.
- The device will revert to its factory default settings, and you will need to reconfigure it.
7. Sònrachaidhean
| Feart | Sònrachadh |
|---|---|
| Dèanadair | YOOSEE |
| Modail | KAP-X330 |
| Inbhe gun uèir | 802.11n (compatible with 802.11g/b) |
| Tricead | 2.4GHz |
| Pròtacalan tèarainteachd | WPA2, WPA, WEP (64/128-bit) |
| Feartan sònraichte | WPS, Standard AP Mode |
| Cuir a-steach cumhachd | Bivolt 110V / 220V |
| Meudan (L x W x H) | 15 x 12 x 8 cm |
| Cuideam | 200 gram |
| Innealan co-fhreagarrach | Laptop, Smartphone, Tablet, Smart TV |
8. Barantas agus Taic
For warranty information and technical support, please refer to the contact details provided by your retailer or visit the official YOOSEE weblàrach. Cùm do chuidhteas ceannach mar dhearbhadh ceannach airson tagraidhean barantais.