Bosch Professional Detector GMS 120-27 Instruction Manual

1. Ro-ràdh

The Bosch Professional Detector GMS 120-27 is designed for quick and accurate location of various materials within walls, ceilings, and floors. This device assists in identifying metal (magnetic and non-magnetic), live electrical cables, and wooden substructures, ensuring safer drilling and construction activities. Its user-friendly interface and robust design make it suitable for professional use on construction sites.

2. Fiosrachadh Sàbhailteachd

Always read and understand all safety warnings and instructions before operating the device.

• Ensure the device is used within its specified operating conditions.
• Na feuch ris an inneal atharrachadh.
• Cùm an inneal air falbh bho taiseachd agus teòthachd anabarrach.
• Always verify detection results with other information sources if possible, especially before drilling.

3. Pasgan-susbaint

Dèan cinnteach gu bheil a h-uile nì anns a’ phacaid:

• Bosch Professional Detector GMS 120-27
• Cùis Dìon
• 2 x Bataraidh alcaileach AA
• peann comharrachaidh

4. Toradh thallview

The GMS 120-27 detector features a robust design with a shock-absorbing rubber housing, providing durability and an IP54 rating for protection against dust and splashing water. Key components include a simplified mode selection interface, a central display, and an LED ring for clear object indication.

Image showing the Bosch Professional Detector GMS 120-27, highlighting its compact design and display.

Prìomh fheartan:

• Tri-colour LED Ring: Indicates detection status (red for object detected, yellow for approaching object, green for no object).
• Material Identification: Distinguishes between magnetic metal, non-magnetic metal, live lines, and non-metallic materials.
• Simplified Mode Selection: Easy switching between detection modes.
• Taigheadas làidir: Shock-absorbing rubber housing with IP54 protection.

5. Suidhich

5.1 Stàladh bataraidh

1. Lorg an roinn bataraidh air cùl an inneil.
2. Fosgail an còmhdach roinn bataraidh.
3. Insert the two AA alkaline batteries, ensuring correct polarity (+/-).
4. Dùin an còmhdach roinn bataraidh gu tèarainte.

5.2 A’ cur cumhachd air/dheth

• Brùth am putan cumhachd gus an inneal a thionndadh air.
• Press and hold the power button to turn the device off.

6. Stiùireadh Obrachaidh

6.1 Taghadh Modh

The GMS 120-27 offers simplified mode selection for different detection tasks. Refer to the device's display for current mode indication.

6.2 Detection Process

1. Select the appropriate detection mode for the material you are searching for.
2. Place the detector flat against the surface to be scanned.
3. Move the device slowly and steadily across the surface.
4. Observe the LED ring and central display for indications.
5. When an object is detected, the LED ring will glow yellow as you approach it, and red when directly over it. The display will also provide information on the type of material detected.
6. Use the included marker pen to mark the detected location if necessary.

6.3 Detection Depths

The maximum detection depths are as follows:

• Non-magnetic Metal: 120 mm
• Magnetic Metal: 100 mm
• Voltage-conducting Wires: 50 mm
• Fiodh: 30 mm

7. Cumail suas

7.1 Glanadh

• Glan an inneal le bog, damp aodach. Na cleachd luchd-glanaidh sgudail no solventan.
• Ensure the detection surface is free from dirt and debris for accurate readings.

7.2 Stòradh

• Stòraich an inneal anns a’ chùis dìon aige nuair nach eilear ga chleachdadh.
• Thoir air falbh bataraidhean mura tèid an inneal a chleachdadh airson ùine mhòr gus casg a chur air aodion.
• Store in a dry, dust-free environment, away from direct sunlight and extreme temperatures.

8. A ’dèanamh trioblaid

Mura h-eil an inneal ag obair mar a bha dùil, smaoinich air na leanas:

9. Sònrachaidhean

10. Barantas agus Taic

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Bosch Professional weblàrach.