UIBI X3 & X7 Jump Starter with Air Compressor User Manual

1. Ro-ràdh

Thank you for choosing the UIBI X3 or X7 Jump Starter with Air Compressor. This versatile device combines a powerful jump starter, a high-performance tire inflator, a portable power bank, and an emergency LED light. Designed for convenience and safety, it is an essential tool for any vehicle owner, providing reliable assistance for dead batteries, flat tires, and charging needs on the go.

This manual will guide you through the proper use, maintenance, and troubleshooting of your UIBI jump starter. Please read it thoroughly before first use to ensure safe and optimal performance.

2. Fiosrachadh Sàbhailteachd

Lean na ceumannan sàbhailteachd a leanas an-còmhnaidh gus casg a chur air dochann no milleadh air an inneal agus air do charbad.

• Leugh a h-uile stiùireadh: Before operating the jump starter, read and understand all safety information and operating instructions.
• Dìon sùla: Always wear safety glasses when working with batteries.
• Fionnarachadh: Ensure adequate ventilation when jump starting a vehicle.
• Casg Splanc: Avoid creating sparks near the battery. Do not smoke or allow open flames near the battery or jump starter.
• Polarity: Ceangail an clamps with correct polarity. Connecting incorrectly can cause damage to the device, battery, or vehicle.
• Clann is Peataichean: Cùm an inneal a-mach à ruigsinneachd chloinne is pheataichean.
• Stòradh: Stòraich an inneal ann an àite fionnar, tioram air falbh bho sholas dìreach na grèine agus teòthachd anabarrach.
• Inneal millte: Do not use the device if it is damaged, cracked, or leaking.
• A' cur cosgais: Only charge the device using the provided charging cable and a compatible adapter.
• Taisbeanadh uisge: Na cuir an inneal fo uisge no suidheachaidhean fliuch.

3. Pasgan-susbaint

Dèan cinnteach gu bheil a h-uile rud anns a’ phacaid agad:

• UIBI X3 or X7 Jump Starter
• Càbaill geansaidh glic
• Air Hose with Nozzles (for various inflatables)
• Càball cosgais USB-C
• Cùis stòraidh
• Leabhar-làimhe cleachdaiche

Figear 3.1: UIBI X3 and X7 Jump Starters shown with all included accessories, including smart jumper cables, air hose, various nozzles, and charging cables, neatly organized in their storage cases.

4. Toradh thallview

Familiarize yourself with the components of your UIBI jump starter.

Figear 4.1: The UIBI X3 model, highlighting its digital display for battery level and pressure, and the control buttons for jump start, air compressor, and LED light functions.

Figear 4.2: The UIBI X7 model, featuring its larger digital display for real-time pressure and battery status, along with intuitive control buttons for various modes.

Prìomh cho-phàirtean:

• Taisbeanadh didseatach: Shows battery level, air pressure (PSI, BAR, KPA, Kg/cm²), and operational modes.
• Putan Cumhachd: Tionndaidh an inneal air / dheth.
• Putan Modh (M): Switches between air compressor modes (e.g., car, motorcycle, bicycle, ball).
• +/- Putanan: Adjusts target air pressure.
• Port Tòiseachaidh Leum: For connecting smart jumper cables.
• Port Pìob Adhair: For connecting the air hose.
• Toradh USB-A (QC3.0): Airson innealan dealain a luchdadh a-nuas.
• Type-C PD45W Input/Output: For charging the jump starter and charging electronic devices.
• Flashlight LED: Provides illumination, strobe, and SOS signals.

5. Suidhich

Before first use, ensure the jump starter is fully charged.

5.1 Cìs tòiseachaidh

1. Connect the provided USB-C charging cable to the Type-C PD45W port on the jump starter.
2. Ceangail ceann eile a’ chàball USB-C ri inneal-atharrachaidh balla USB co-chòrdail (nach eil air a ghabhail a-steach).
3. The digital display will show the charging progress. Charge until the battery indicator shows full.

Figear 5.1: The UIBI X7 model highlighting its Type-C PD45W port, indicating its fast charging capability for both input and output.

A full charge typically takes approximately 2 hours with a PD45W charger.

6. Operating Instructions (Jump Starter)

Follow these steps to safely jump start your vehicle.

1. Ullaich an carbad: Turn off the vehicle's ignition and all accessories (headlights, radio, A/C). Engage the parking brake.
2. Ceangail Càbaill Jumper ris an Jump Starter: Insert the blue plug of the smart jumper cables into the jump start port on the UIBI device. Ensure a firm connection.
3. Ceangail Clamps gu Bataraidh:
   • Ceangail an RED (+) clamp chun an deimhinneach (+) crìoch bataraidh a’ charbaid.
   • Ceangail an DUBH (-) clamp chun an àicheil (-) crìoch bataraidh a’ charbaid.

   The smart jumper cables will beep if an incorrect connection is detected. Correct the connection before proceeding.
4. Tòisich an càr: Aon uair 's gu bheil an clamps are correctly connected and the indicator on the smart cable is solid green (or as per cable indicator), start your vehicle's engine.
5. Thoir air falbh Clamps: Once the vehicle starts, immediately remove the BLACK (-) clamp first, then the RED (+) clamp from the battery. Disconnect the smart jumper cables from the UIBI device.

Figear 6.1: The UIBI X7 Jump Starter connected to a car battery, demonstrating the proper setup for jump-starting a vehicle. The display shows '8.8.8' indicating readiness.

Figear 6.2: The UIBI X3 Jump Starter connected to a car battery, illustrating the connection of the smart clamps to the battery terminals for a quick and safe jump start.

Thoir an aire: If the vehicle does not start on the first attempt, wait at least 30 seconds before trying again. Do not attempt more than 3 consecutive jump starts.

7. Air Compressor Operation

The UIBI jump starter features a built-in air compressor for inflating tires and other inflatables.

1. Ceangail Pìob Adhair: Screw the air hose into the air hose port on the jump starter.
2. Ceangail Nozzle: Select the appropriate nozzle for your item (e.g., Schrader valve for car tires, needle for balls) and attach it to the end of the air hose.
3. Cumhachd air: Press the Power button to turn on the device. The display will show the current pressure.
4. Tagh Modh (Roghainneil): Press the 'M' (Mode) button to cycle through preset inflation modes (e.g., car, motorcycle, bicycle, ball). Each mode has a default pressure, which can be adjusted.
5. Suidhich Brùthadh Targaid: Use the '+' and '-' buttons to set your desired pressure.
6. Tòisich an atmhorachd: Press the Power button again to start the air compressor. The display will show the real-time pressure.
7. Cuir dheth gu fèin-ghluasadach: Stadaidh an compressor gu fèin-ghluasadach aon uair ‘s gun ruig e an cuideam ro-shuidhichte.
8. Disconnect: Unscrew the air hose from the item and the jump starter.

Figear 7.1: The UIBI X7 Jump Starter actively inflating a car tire, demonstrating its cordless air compressor function. The display shows the current PSI reading.

Figear 7.2: The UIBI X3 Jump Starter in use, inflating a car tire. This image highlights the multi-use air pump feature with auto-stop functionality.

8. Gnìomh a’ Bhanca Cumhachd

The UIBI jump starter can charge your electronic devices.

1. Inneal ceangail: Use a compatible USB cable (not included) to connect your smartphone, tablet, or other electronic device to either the USB-A (QC3.0) output port or the Type-C PD45W port on the jump starter.
2. Cumhachd air: Press the Power button on the jump starter to activate the charging function.
3. A' cur cosgais: Your device will begin charging. The jump starter's display may show its remaining battery level.

Figear 8.1: The UIBI X7 model highlighting its Type-C PD45W port, indicating its fast charging capability for both input and output, allowing it to function as a portable power bank.

9. LED Light Function

The integrated LED flashlight offers three modes for various situations.

1. Tionndaidh air: Press and hold the LED light button (often integrated with the power button or a dedicated button) to turn on the flashlight.
2. Atharraich modhan: Briefly press the LED light button repeatedly to cycle through the modes:
   • Solas seasmhach: Airson soillseachadh coitcheann.
   • Solas Sròb: Airson comharrachadh no aire a tharraing.
   • Comharra SOS: For emergency situations, emitting the Morse code SOS pattern.
3. Tionndaidh dheth: Press and hold the LED light button again to turn off the light.

Figear 9.1: The UIBI X7 Jump Starter demonstrating its emergency LED light, capable of providing stable illumination, strobe, and SOS signals for various situations.

10. A 'cur cosgais air an inneal

To ensure your UIBI jump starter is always ready, recharge it after each use or when the battery level is low.

• Connect the provided USB-C charging cable to the Type-C PD45W input port on the jump starter.
• Connect the other end of the USB-C cable to a USB wall adapter (e.g., 5V/2A, 9V/2A, or PD45W compatible).
• The digital display will indicate the charging status. Charge until the battery icon shows full.
• It is recommended to fully charge the device every 3-6 months even if not in use to maintain battery health.

11. Cumail suas

Proper maintenance will extend the life of your UIBI jump starter.

• Glanadh: Sguab an inneal le clò bog, tioram. Na cleachd ceimigean cruaidh no innealan-glanaidh sgrìobach.
• Stòradh: Store the device in its carrying case in a cool, dry place, away from direct sunlight, moisture, and extreme temperatures.
• Cùram Bataraidh: Ath-luchdaich an inneal a h-uile 3-6 mìosan gus casg a chur air sgaoileadh domhainn agus gus beatha a’ bhataraidh a leudachadh.
• Sgrùdadh càball: Regularly inspect the jumper cables and air hose for any signs of damage or wear. Replace if necessary.

12. A ’dèanamh trioblaid

Ma thachras tu ri duilgheadasan, thoir sùil air na duilgheadasan agus na fuasglaidhean cumanta a leanas.

Ma mhaireas an duilgheadas às dèidh dhut na fuasglaidhean seo fheuchainn, cuir fios gu taic luchd-cleachdaidh.

13. Sònrachaidhean

14. Barantas agus Taic

UIBI products are designed and manufactured to the highest quality standards. For warranty information and customer support, please refer to the warranty card included in your package or visit the official UIBI website. If you have any questions or require assistance, do not hesitate to contact our customer service team.