aigo AF12 3-in-1 ARGB Fan Kit Instruction Manual

Ro-ràdh

This manual provides detailed instructions for the installation, operation, and maintenance of your aigo AF12 3-in-1 ARGB Fan Kit. Please read this manual thoroughly before use to ensure proper functionality and longevity of the product.

Feartan toraidh

The aigo AF12 3-in-1 ARGB Fan Kit offers efficient cooling and customizable lighting for your computer system. Key features include:

• Modail: AF123IN1-BK
• Meud neach-leantainn: 3 x 120mm fans
• Luas an neach-leantainn: 800-2000 RPM (±10%)
• Fan Noise Level: ≤30dBA
• Sruth Adhair: 86.6 CFM
• Bruthadh Statach: 1.27mm-H²O
• Working Current (Motor): ≤0.2A (12V)
• Working Current (Light): ≤0.48A (5V)
• Meudan: 120 x 120 x 25 mm
• Solais ARGB: Addressable RGB lighting for customizable effects.

Susbaint pacaid

Dearbhaich gu bheil na nithean gu lèir a tha air an liostadh gu h-ìosal an làthair sa phacaid agad:

• 3 x aigo AF12 ARGB Fans
• Sgriubha stàladh
• ARGB Controller (if included in kit)
• Cables (Power, ARGB Sync)

Stiùireadh stàlaidh

Follow these steps to properly install your aigo AF12 ARGB fans into your computer case.

1. Ullaich an siostam agad: Power off your computer and disconnect it from the power source. Open your computer case.
2. Comharraich Àiteachan Stàlaidh: Determine the desired locations for your fans (e.g., front, top, rear, bottom of the case). Ensure proper airflow direction.
3. Cuir na luchd-leantainn suas: Position each fan in its chosen location. Use the provided mounting screws to secure the fans to the case. Ensure the fan blades are not obstructed.
   

   Image: An aigo AF12 fan viewed from an angle, highlighting the mounting points on its corners. This illustrates how the fan is secured.
4. Ceangail Càbaill Cumhachd: Connect the 3-pin power connector from each fan to an available fan header on your motherboard or fan controller.
5. Connect ARGB Cables: Connect the ARGB cable from each fan to the ARGB controller (if applicable) or directly to a compatible 5V 3-pin ARGB header on your motherboard. Ensure correct pin orientation to avoid damage.
   

   Ìomhaigh: Proifeasanta taobhfile of the aigo AF12 fan, illustrating the thickness and potential locations for cable connections on the frame.

6. Riaghladh càbaill: Route cables neatly to prevent interference with other components and to improve airflow.
7. Dùin a’ Chùis agus Cuir an Cumhachd Air: Close your computer case, reconnect the power, and power on your system.

Stiùireadh Obrachaidh

Once installed, your aigo AF12 ARGB fans will operate automatically based on your system's fan control settings. The ARGB lighting can be controlled via your motherboard's software or a dedicated ARGB controller.

Smachd air astar luchd-leantainn

Fan speed can typically be adjusted through your motherboard's BIOS/UEFI settings or through fan control software provided by your motherboard manufacturer. Refer to your motherboard manual for specific instructions.

Smachd Solais ARGB

If connected to a 5V 3-pin ARGB header on your motherboard, use your motherboard's ARGB synchronization software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync) to customize lighting effects, colors, and patterns.

If using a dedicated ARGB controller (often included with fan kits), refer to the controller's specific instructions for lighting adjustments.

Cumail suas

Regular maintenance ensures optimal performance and extends the lifespan of your fans.

• Glanadh Duslach: Periodically clean dust from the fan blades and housing using compressed air or a soft brush. Ensure the system is powered off before cleaning.
• Sgrùdadh càball: Verify that all cables are securely connected and free from damage.
• Sgrùdadh Fuaim: Listen for unusual noises, which may indicate a fan bearing issue or obstruction.

Fuasgladh thrioblaidean

If you encounter issues with your aigo AF12 ARGB fans, refer to the following common solutions:

Fans Not Spinning

• Thoir sùil air Ceangal Cumhachd: Ensure the fan's 3-pin power connector is securely plugged into the motherboard or controller.
• Check BIOS Settings: Verify that fan headers are enabled in your motherboard's BIOS/UEFI settings.
• Test Another Header: Try connecting the fan to a different fan header to rule out a faulty header.

ARGB Lights Not Working

• Thoir sùil air ceangal ARGB: Ensure the 5V 3-pin ARGB connector is correctly and securely plugged into the motherboard or controller. Verify the pin orientation.
• Check Software: Confirm that your motherboard's ARGB software is installed and configured correctly.
• Co-chòrdalachd: Ensure your motherboard has a compatible 5V 3-pin ARGB header. This product is not compatible with 12V 4-pin RGB headers.

Fuaim cus

• Thoir sùil airson bacaidhean: Ensure no cables or other components are touching the fan blades.
• Sgriothan sreap: Verify that all mounting screws are tightened to prevent vibrations.
• Cruinneachadh Dust: Clean any dust from the fan blades.

Sònrachaidhean Teicnigeach

Barantas agus Taic

This aigo product comes with a Barantas 12 mìosan bho cheann-latha a’ cheannaich, a’ còmhdach lochdan saothrachaidh.

For technical support, warranty claims, or further assistance, please visit the official aigo store or contact their customer service through the details provided on their weblàrach.

Official aigo Store: aigo Store on Amazon