Ro-ràdh
Thank you for choosing the Simyke BME28-RX Video Baby Monitor Add-on Display. This unit is designed to expand your existing Simyke BME28 or BMS28 series baby monitor system, allowing you to view your baby from multiple locations or replace a lost/damaged parent unit. It features a high-quality IPS screen for clear visuals and a long-lasting battery for extended use. Please read this manual carefully before use to ensure proper operation and safety.
Fiosrachadh Sàbhailteachd
- Keep the monitor unit and power adapter out of reach of children.
- Do not place the monitor unit near water or heat sources.
- Use only the provided power adapter. Using unauthorized adapters may damage the unit and void the warranty.
- Avoid dropping or subjecting the unit to severe impact.
- Na feuch ri an aonad a thoirt às a chèile no a chàradh thu fhèin. Cuir fios gu taic luchd-cleachdaidh airson cuideachadh.
- Dèan cinnteach gu bheil fionnarachadh ceart timcheall an aonaid rè obrachadh.
Dè th' anns a' Bhocsa
- 1x Simyke BME28-RX Baby Monitor (Display Only)
- Adaptor cumhachd 1x
- 1x Leabhar-làimhe Cleachdaiche
Bathar seachadview
Figear 1: Aghaidh view of the Simyke BME28-RX display unit, featuring the IPS screen and navigation buttons.
Figear 2: The display unit with its screen active, showing a live feed and various status indicators like signal strength and temperature.
Figear 3: Cùl view of the display unit, highlighting the integrated speaker and the foldable kickstand for tabletop placement.
Display Unit Components
- IPS Screen: High-resolution display for clear video feed.
- Putanan seòlaidh: Suas, Sìos, Clì, Deas, Ceart gu leòr airson seòladh clàr-taice.
- Putan Cumhachd: Brùth agus cum gus tionndadh air / dheth.
- Putan Micreofon: Press to activate two-way audio.
- Neach-labhairt: For two-way audio and alerts.
- Port cosgais: Airson an adapter cumhachd a cheangal.
- Kickstand: Airson suidheachadh clàr.
Suidhich
1. Charging the Display Unit
Before first use, fully charge the display unit. Connect the provided power adapter to the charging port on the side of the display unit and plug it into a power outlet. The charging indicator light will illuminate. A full charge typically takes approximately 3-4 hours.
2. Pairing with a Camera Unit
This display unit is an add-on and must be paired with a compatible Simyke BME28 or BMS28 series camera unit. If your camera is already paired with another display, you can add this new display. Refer to your original camera unit's manual for specific pairing instructions. Generally, the steps involve:
- Turn on both the display unit and the camera unit.
- Access the 'Camera Pairing' or 'Add Camera' option in the display unit's menu.
- Press the pairing button on the camera unit (location varies by model, usually on the back or bottom).
- The display unit will search for and connect to the camera. Once connected, the camera's video feed will appear on the screen.
Stiùireadh Obrachaidh
Cumhachd air / dheth
- To turn on: Press and hold the Power button (⑂) until the screen illuminates.
- To turn off: Press and hold the Power button (⑂) until the screen goes blank.
Gnìomhan bunaiteach
- Smachd tomhas-lìonaidh: Use the Up/Down navigation buttons to adjust the speaker volume.
- Smachd soilleireachd: Navigate to the 'Settings' menu and select 'Brightness' to adjust screen illumination.
- Seòladh clàr-taice: Use the Up/Down/Left/Right navigation buttons to move through menu options. Press the OK button to confirm a selection.
Prìomh fheartan
Figear 4: Two-Way Audio feature, allowing communication with your baby.
Figear 5: VOX Mode and Temperature Monitoring capabilities.
Figear 6: Day and Night monitoring, ensuring visibility in all lighting conditions.
- Fuaim dà-shligheach: Press and hold the Microphone button (🎤) to speak through the camera unit to your baby. Release the button to hear your baby.
- Modh VOX (Iomlaid le Guth): This mode conserves battery by turning off the screen when no sound is detected from the baby's room. The screen will automatically light up when sound is detected. Enable/disable VOX mode in the 'Settings' menu.
- Sgrùdadh Teòthachd: The display unit shows the real-time temperature of the baby's room, as detected by the camera unit. Set temperature alerts in the 'Settings' menu.
- Ioma-chamara View: Ma tha iomadh camara agad paidhir, faodaidh tu atharrachadh eadar camarathan views or enable a scan mode to cycle through them automatically. This feature supports up to 4 cameras.
- Sealladh oidhche fo-dhearg: The camera unit automatically switches to infrared night vision in low-light conditions, providing a clear black-and-white image on the display unit.
Cumail suas
- Glanadh: Use a soft, dry cloth to clean the display unit. Do not use abrasive cleaners or solvents.
- Stòradh: If storing the unit for an extended period, ensure it is fully charged and then store it in a cool, dry place. Recharge the battery every few months to maintain its health.
- Cùram Bataraidh: Gus beatha bataraidh a leudachadh, seachain a bhith ga leigeil ma sgaoil gu tur gu tric.
Fuasgladh thrioblaidean
| Trioblaid | Adhbhar a dh’fhaodadh a bhith ann | Fuasgladh |
|---|---|---|
| Gun chumhachd/Cha tionndaidh an aonad air | Tha am bataraidh ìosal no air a leigeil ma sgaoil. Chan eil an inneal-atharrachaidh cumhachd ceangailte gu ceart. | Connect the power adapter and charge the unit for at least 30 minutes. Ensure the adapter is securely plugged into both the unit and the outlet. |
| No video/audio from camera | Camera is off or out of range. Unit is not paired with the camera. | Ensure the camera unit is powered on and within range. Re-pair the display unit with the camera unit following the 'Pairing' instructions. |
| Poor video/audio quality | Interference from other devices. Camera too far from display. | Move the display unit closer to the camera. Avoid placing the unit near other electronic devices (e.g., Wi-Fi routers, microwaves) that may cause interference. |
| Screen freezes or unit is unresponsive | Mearachd bathar-bog sealach. | Perform a soft reset by pressing and holding the Power button for 10-15 seconds until the unit restarts. If the issue persists, contact customer support. |
| Bidh bataraidh a’ drèanadh gu sgiobalta | High screen brightness. VOX mode disabled. Aging battery. | Reduce screen brightness. Enable VOX mode to conserve power. If the battery life has significantly degraded over time, it may be reaching the end of its lifespan. |
Sònrachaidhean
| Feart | Sònrachadh |
|---|---|
| Ainm Modail | BME28-RX Display only |
| Innealan co-fhreagarrach | Simyke BME28, BMS28 series baby camera |
| Seòrsa sgrion | Taisbeanadh IPS |
| Fuasgladh glacadh bhidio | 240p |
| Teicneòlas ceangail | Wireless (Wi-Fi) |
| Stòr cumhachd | Corded Electric and Battery Powered |
| Comas Bataraidh | Bataraidh litiam poileimear 2500mAh (air a ghabhail a-steach) |
| Beatha bataraidh | Suas ri 14 uairean a thìde |
| Àireamh nan Sianalan | 4 (supports up to 4 cameras) |
| Meudan (L x W x H) | 4.72 x 2.6 x 0.9 òirleach |
| Cuideam nì | 7.8 unnsa |
| Dath | Geal |
| Cleachdadh a-staigh / a-muigh | A-staigh |
| Seòrsa stàladh | Sliabh clàr-bùird |
| Feartan sònraichte | Portable, 2-Way Audio, Cry Detection (VOX Mode) |
Barantas agus Taic
Simyke products are designed for reliability and performance. For warranty information or technical support, please refer to the warranty card included with your original baby monitor system or visit the official Simyke website. If you encounter any issues not covered in this manual, please contact Simyke customer service for assistance.
Dèanadair: Guangdong Envision Technology Limited
Dùthaich Tùs: Sìona