1. Fiosrachadh Sàbhailteachd
Please read all safety instructions carefully before using the SYNCWIRE SW2002 Portable Tire Inflator. Failure to follow these instructions may result in product damage, property damage, or personal injury.
- Cùm a-mach à ruigsinn chloinne.
- Do not operate the inflator continuously for more than 10 minutes. Allow a 10-minute cool-down period between uses to prevent overheating.
- Ensure the correct pressure unit (PSI, KPA, BAR, KG/CM²) is selected for your item before inflation.
- Na fàg an inneal-sèididh gun sùil fhad 's a tha e ag obrachadh.
- Avoid exposing the inflator to rain or moisture.
- Do not attempt to disassemble or modify the device. Contact customer support for assistance.
- Cleachd an càball cosgais agus na goireasan a tha air an toirt seachad a-mhàin.
- Store the inflator in a cool, dry place when not in use.
2. Pasgan-susbaint
Dèan cinnteach gu bheil a h-uile rud anns a’ phacaid agad:
- 1x SYNCWIRE SW2002 Portable Tire Inflator
- 1x Air Hose
- 1x càball cosgais USB-C
- Bag stòraidh 1x
- 4x Nozzle Adapters (Ball Needle, Bicycle Valve Nozzle, Air Pillow Nozzle, Swimming Ring Nozzle)
- 4x Car Tire Valve Caps
- 1x Leabhar-làimhe Cleachdaiche (An sgrìobhainn seo)
- 1x Warranty Policy
Image: All components included in the SYNCWIRE SW2002 package, laid out neatly.
3. Toradh thallview
3.1 Prìomh fheartan
- High-Speed Inflation: Inflates tires up to 150 PSI, 2X faster than standard inflators.
- Taisbeanadh LCD mòr: Ultra-large, clear display shows real-time and preset pressure values, visible day and night.
- Accurate Digital Gauge: High-precision sensor provides readings within ±0.5 PSI.
- Cuir dheth gu fèin-ghluasadach: Cuiridh e stad air an atmhorachd gu fèin-ghluasadach aon uair ‘s gu bheil an cuideam ro-shuidhichte air a ruighinn.
- Iomadach Modhan Atmhorachd: 5 preset modes for Car, Motorcycle, Bike, Ball, and a customizable mode.
- Aonadan ioma-chruthach: Supports PSI, KPA, BAR, and KG/CM².
- Flashlight LED air a thogail a-steach: A’ toirt seachad solas airson a chleachdadh ann an suidheachaidhean solais ìosal.
- Banca Cumhachd Èiginn: USB output port allows charging of mobile devices.
- Compact agus so-ghiùlain: Dealbhaichte airson stòradh agus còmhdhail furasta.
3.2 Cruth inneal
Ìomhaigh: Aghaidh view of the inflator showing the LCD screen, mode selection, power, and +/- buttons.
- Taisbeanadh LCD: Shows current and target pressure, battery level, and selected mode.
- Putan Modh: Cycles through inflation modes (Car, Motorcycle, Bike, Ball, Custom).
- Putan Cumhachd: Tionndaidhidh e an inneal air/dheth agus tòisichidh/stadaidh e air sèideadh.
- +/- Putanan: Adjusts preset pressure values.
- Putan an Aonaid: Changes pressure units (PSI, KPA, BAR, KG/CM²).
- Putan Solais LED: Activates/deactivates the built-in flashlight.
- Port Pìob Adhair: Connects the air hose to the inflator.
- Input USB-C: For charging the inflator.
- Toradh USB-A: Airson an inneal-sèididh a chleachdadh mar bhanca cumhachd.
4. Suidhich
4.1 A’ cur cosgais air an inneal-sèididh
- Connect the supplied USB-C charging cable to the USB-C input port on the inflator.
- Ceangail ceann eile a’ chàball ri inneal-atharrachaidh cumhachd USB co-chòrdail (nach eil air a ghabhail a-steach) no port USB.
- The battery indicator on the LCD display will flash during charging and become solid when fully charged.
- A full charge typically takes 2-3 hours from 2 bars to 3 bars. The device cannot be used while charging.
4.2 A’ ceangal an t-sròin-adhair agus an t-sròin
- Screw the air hose securely into the air hose port on the top of the inflator.
- Tagh an inneal-atharrachaidh nozzle iomchaidh airson an nì a tha thu airson a lìonadh.
- Screw the chosen nozzle adapter onto the free end of the air hose.
5. Stiùireadh Obrachaidh
5.1 A’ cur cumhachd air/dheth
- Brùth agus cùm an Putan Cumhachd for 3 seconds to turn the inflator on.
- The LCD display will light up, showing the current battery level and default mode.
- Gus a chuir dheth, brùth is cum sìos am putan Putan Cumhachd for 3 seconds again, or the device will automatically shut off after a period of inactivity.
5.2 Selecting Inflation Mode and Unit
Image: The inflator's LCD screen displaying various preset inflation modes.
- Às dèidh dhut an cumhachd a chur air, brùth air a’ phutan Putan Modh to cycle through the preset inflation modes: Car, Motorcycle, Bike, Ball, and Custom.
- Each mode has a default pressure range. For example, Car mode is typically 26-50 PSI.
- Brùth an Putan an Aonaid to switch between pressure units: PSI, KPA, BAR, KG/CM².
5.3 A’ suidheachadh a’ chuideam a tha thu ag iarraidh
- Once a mode is selected, the preset pressure value will flash on the LCD.
- Cleachd an + agus - buttons to adjust the desired target pressure.
- Refer to your vehicle's or item's manufacturer recommendations for correct pressure values.
5.4 A’ tòiseachadh agus a’ stad atmhorachd
Image: The inflator actively inflating a car tire, demonstrating its speed.
- Connect the nozzle adapter to the valve stem of the item you are inflating. Ensure a tight seal.
- Brùth an Putan Cumhachd to start inflation. The real-time pressure will be displayed.
- Stadaidh an inneal-sèididh gu fèin-ghluasadach aon uair ‘s gun ruig e an cuideam ro-shuidhichte.
- To manually stop inflation, press the Putan Cumhachd a-rithist.
- Carefully disconnect the nozzle from the valve stem. A small amount of air leakage is normal.
5.5 A’ cleachdadh an lòchran LED
- Brùth an Putan Solais LED gus an lòchran a chur air.
- Press again to cycle through different light modes (e.g., steady, SOS, flashing).
- Brùth an treas uair gus an lòchran a chuir dheth.
5.6 Gnìomh a’ Bhanca Cumhachd
Image: The inflator connected via USB to charge a smartphone, highlighting its power bank capability.
- Connect your device's charging cable to the USB-A output port on the inflator.
- The inflator will begin charging your device. This function is useful for emergencies.
6. Cumail suas
6.1 Glanadh
- Ensure the inflator is turned off and disconnected from any power source before cleaning.
- Sguab an taobh a-muigh le bog, damp aodach. Na cleachd ceimigean cruaidh no innealan-glanaidh sgudail.
- Keep the air intake and exhaust vents clear of dust and debris.
6.2 Stòradh
- Store the inflator and its accessories in the provided storage bag.
- Cùm an inneal ann an àite fionnar, tioram, air falbh bho sholas dìreach na grèine agus teòthachd anabarrach.
- For prolonged storage, charge the inflator every 3-6 months to maintain battery health.
7. A ’dèanamh trioblaid
| Trioblaid | Adhbhar a dh’fhaodadh a bhith ann | Fuasgladh |
|---|---|---|
| Chan eil an inflator a’ tionndadh air. | Bataraidh ìosal. | Charge the inflator fully. |
| Inflator stops prematurely. | Preset pressure reached. | This is normal operation. Check the pressure reading. |
| Overheating. | Allow the device to cool down for 10 minutes before resuming use. | |
| Atmhorachd slaodach no gun toradh èadhair. | Air hose or nozzle not securely connected. | Dèan cinnteach gu bheil na ceanglaichean uile teann. |
| Incorrect nozzle adapter used. | Select the correct adapter for the item. | |
| Leughaidhean cuideam mì-chruinn. | Incorrect pressure unit selected. | Press the Unit Button to select the desired unit (PSI, KPA, BAR, KG/CM²). |
| Bacadh mothachaidh. | Ensure the air hose and valve are clear of debris. |
8. Sònrachaidhean
| Feart | Sònrachadh |
|---|---|
| Ainm Modail | SW2002 |
| Brand | SYNCWIRE |
| Brùthadh as àirde | 150 PSI |
| Comas Sruth Adhair | 18 liotair sa mhionaid |
| Stòr cumhachd | Cumhachd bataraidh |
| Modh obrachaidh | fèin-ghluasadach |
| Fad Hose | 9.05 òirlich |
| Cuideam nì | 1.05 Punnd |
| Meudan toraidh (LxWxH) | 5.29" x 2.93" x 1.85" |
| Stuth | Durable, Reliable |
| Dath | Dubh |
9. Barantas agus Taic
SYNCWIRE provides a Barantas 36 mìosan for the SW2002 Portable Tire Inflator.
For any inquiries or assistance, please contact SYNCWIRE customer service. We are committed to providing fast and friendly support within 24 hours for all your questions and concerns.
Please refer to the included Warranty Policy document for detailed terms and conditions.