THIRDREALITY Zigbee Smart Garage Door Tilt Sensor Instruction Manual

1. Ro-ràdh

The THIRDREALITY Zigbee Smart Garage Door Tilt Sensor is designed to enhance home security by providing real-time alerts on your garage door's status. It accurately detects when the garage door opens or closes, offering a reliable defense against unauthorized access. This sensor integrates with various smart home ecosystems through Zigbee 3.0 connectivity, ensuring seamless monitoring and control.

2. Prìomh fheartan

• Precision and Security: Provides prompt alerts for garage door open/close status.
• Ceangal Zigbee 3.0: Compatible with Amazon Echo devices with built-in Zigbee, Samsung SmartThings (driver installation required), Homey, Home Assistant, Hubitat, and Third Reality Hub.
• Smart Assistant Support: Integrates with Apple HomeKit, Google Home, and Amazon Alexa (Smart Speaker required) via Smart Bridge MZ1 (Sold Separately).
• Cugallachd a ghabhas atharrachadh: Four manual sensitivity levels to customize responsiveness.
• Beatha bataraidh fada: Up to 2 years of operation on 2 AAA batteries under normal conditions.
• Software OTA Updates: Supports over-the-air firmware upgrades for enhanced functionality.

3. Pasgan-susbaint

• 1 x THIRDREALITY Zigbee Smart Garage Door Tilt Sensor
• 2 x Bataraidhean AAA (air an stàladh ro-làimh no air an toirt a-steach air leth)
• Adhesive mounting tape
• Leabhar-làimhe cleachdaiche (an sgrìobhainn seo)

4. Setup agus Stàladh

4.1. Stàladh bataraidh

Gus na bataraidhean a stàladh:

1. Gently push to open the back cover of the sensor.
2. Insert the 2 AAA batteries, ensuring correct polarity.
3. Dùin an còmhdach cùil gu tèarainte.

Image: THIRDREALITY Garage Door Tilt Sensor and two AAA batteries.

4.2. A’ cur suas an sensor

Mount the sensor on the top panel of your garage door. Ensure the 'UP' arrow on the back of the sensor and the speaker holes are positioned at the top for correct orientation and functionality.

1. Clean the desired mounting surface on the garage door panel.
2. Peel off the protective backing from the adhesive tape on the sensor.
3. Firmly press the sensor onto the clean surface, ensuring the 'UP' arrow and speaker holes face upwards.

Image: The THIRDREALITY Garage Door Tilt Sensor mounted on the top panel of a garage door, showing its placement for optimal tilt detection.

4.3. Pairing with a Smart Home Hub

The sensor uses Zigbee 3.0 for connectivity. Follow the pairing instructions specific to your smart home hub.

4.3.1. General Zigbee Pairing

1. Ensure your smart home hub is in pairing mode.
2. Press and hold the reset button on the sensor for 5 seconds. The LED light will turn red and flash in blue, indicating it's in Zigbee pairing mode.
3. The sensor will exit pairing mode after 3 minutes if not paired.
4. Once paired, the sensor will appear in your hub's device list.

4.3.2. Pairing with Amazon Alexa App

Before pairing, ask Alexa to check for updates. Then, follow these steps:

1. Fosgail an aplacaid Alexa.
2. Tap the "+" icon to add a device.
3. Choose "Other" and then "Zigbee".
4. Press "Discover Devices".
5. The Garage Door Tilt Sensor will be added as the "First contact sensor".

4.3.3. Pairing with 3R-Installer App (via Smart Bridge MZ1)

If using the Smart Bridge MZ1 (sold separately) for broader smart assistant compatibility (Apple HomeKit, Google Home), ensure your Smart Bridge firmware is up to date.

1. Open the 3R-Installer App.
2. Tap the Smart Bridge icon to enter the devices page.
3. Tap "+ Bridge ZIGBEE Devices" to start Zigbee pairing.
4. Lean an stiùireadh air an sgrion gus an inneal a chur ris.
5. To link with Matter-enabled services, copy the Manual Setup Code or scan the QR Code within 3 minutes, then add the bridge to other Matter-supported ecosystems.

Image: The THIRDREALITY Garage Door Tilt Sensor connected to a Smart Bridge MZ1, illustrating its integration with various smart home platforms like Apple Home, Google Home, SmartThings, and Alexa.

5. A’ cleachdadh an mothachaidh

Once installed and paired, the sensor will automatically detect changes in your garage door's tilt. When the garage door opens or closes, the sensor will send a signal to your connected smart home hub, triggering alerts or routines you have set up.

Image: A smartphone screen showing a security alarm notification indicating the garage door tilt sensor has been triggered and is open.

6. Atharrachadh Cugallachd

The sensor offers four sensitivity levels to ensure precise monitoring. These levels can be manually adjusted using dip switches located inside the sensor.

1. Open the back cover of the sensor (refer to Battery Installation).
2. Locate the 'LEVEL' dip switches on the circuit board.
3. Adjust the switches according to the desired sensitivity:
   • 00: Ultra High (UH)
   • 01: High (H)
   • 10: Medium (M)
   • 11: Low (L)
4. Dùin an còmhdach cùil.

6.1. Audible Beep Control

The sensor emits an audible beep sound when its status changes. You can disable this feature if preferred:

1. Fosgail còmhdach cùil an sensor.
2. Locate the 'SIREN' dip switch on the circuit board.
3. Toggle the switch to 'OFF' to disable the beep sound.
4. Dùin an còmhdach cùil.

7. Cumail suas

7.1. Ath-nuadhachadh bataraidh

The sensor is powered by 2 AAA batteries, offering up to 2 years of battery life. Replace batteries when the low battery indicator appears in your smart home app.

1. Fosgail còmhdach cùil an sensor.
2. Thoir air falbh na seann bataraidhean AAA.
3. Insert new AAA batteries, observing correct polarity.
4. Dùin an còmhdach cùil.

7.2. Ùrachaidhean Firmware

The sensor supports Over-The-Air (OTA) firmware updates. Check your smart home app or the 3R-Installer App for available updates to ensure optimal performance and access to new features.

8. A ’dèanamh trioblaid

• Sensor Not Pairing: Ensure the sensor is within 30 feet of your Zigbee hub. Verify the hub is in pairing mode. If using SmartThings, ensure the correct Edge driver is installed.
• Incorrect Status Readings: Check the sensor's mounting orientation. The 'UP' arrow and speaker holes must be at the top. Adjust sensitivity levels if needed.
• No Audible Beep: Verify the 'SIREN' dip switch inside the sensor is set to 'ON'.
• Beatha Bataraidh nas giorra na bha dùil: Extreme temperatures can affect battery performance. Ensure the sensor is in an environment within its operating temperature range.
• SmartThings Driver Issues: For SmartThings, driver installation may be required. Refer to the quick start guide or manufacturer's weblàrach-lìn airson stiùireadh sònraichte airson stàladh draibhearan.

9. Sònrachaidhean

10. Barantas agus Taic

Airson fiosrachadh barantais, taic theicnigeach, no tuilleadh cuideachaidh, thoir sùil air fiosrachadh oifigeil an neach-dèanamh. website or contact THIRDREALITY customer service directly. Contact details are typically found on the product packaging or the official THIRDREALITY weblàrach.

11. Goireasan a Bharrachd