ACEMIC G6 2.4G Wireless Microphone System User Manual

Ro-ràdh

Thank you for choosing the ACEMIC G6 2.4G Wireless Microphone Audio Transmitter and Receiver System. This system is designed to convert your traditional dynamic XLR microphone into a wireless setup, offering freedom of movement and high-quality audio transmission. It is ideal for various applications including live performances, presentations, and studio recording. Please read this manual thoroughly to ensure proper setup and operation.

Image: The ACEMIC G6 wireless transmitter (TX) and receiver (RX) units.

Bathar seachadview

Susbaint pacaid

• 1 x ACEMIC G6 Wireless Transmitter (TX)
• 1 x ACEMIC G6 Wireless Receiver (RX)
• 1 x Càball Cosgais USB-C Dùbailte
• 1 x Leabhar-làimhe Cleachdaiche

Prìomh fheartan

• Teicneòlas gun uèir 2.4G: Provides stable and reliable audio transmission.
• XLR Plug-on Design: Easily converts dynamic XLR microphones to wireless.
• 6 Selectable Channels: Allows for multiple units to operate simultaneously without interference.
• Co-fhreagarrachd farsaing: Works with dynamic microphones, audio mixers, and PA systems.
• Beatha bataraidh fada: Built-in rechargeable lithium polymer batteries offer up to 10 hours of continuous working time.
• Raon Tar-chuir Leudaichte: Up to 100 feet (30 meters) in open areas.
• Latency ìosal: Audio latency of less than 5ms ensures real-time performance.
• Fuaim àrd-inbhe: 24-bit/48kHz sampling rate for clear sound reproduction.
• Cuideam aotrom agus so-ghiùlain: Each unit weighs approximately 40g for easy handling.
• Obrachadh aon-iuchrach: Simple power on/off and mute/unmute functions.

Image: The lightweight design of the ACEMIC G6, weighing 40 grams per unit.

Comharrachadh co-phàirt

Each unit (Transmitter and Receiver) features:

• XLR Plug/Socket: For connecting to microphones or audio equipment.
• Lock Design (Transmitter): Secures the unit to the microphone.
• Port cosgais Type-C: Airson ath-lìonadh a’ bhataraidh a-staigh.
• Putan Cumhachd: Long press to power on/off, short press for mute/unmute.
• Power/Pairing Indicator: LED light indicating power status, charging status, and pairing status.

Image: The ACEMIC G6 system demonstrating one-key pairing and connectivity with various audio devices.

Stiùiridhean rèiteachaidh

1. Cosgais Tùsail

Before first use, fully charge both the transmitter and receiver. Use the provided dual USB-C charging cable to connect both units to a USB power adapter (not included). The status indicator will be red during charging and turn blue when fully charged. A full charge typically takes 3-4 hours.

Image: ACEMIC G6 units indicating charging status with LED lights.

2. A ’toirt cumhachd air / dheth

Long press the power button on both the transmitter (TX) and receiver (RX) for 3 seconds to turn them on or off. The power indicator will light up.

3. Paidhir

The transmitter and receiver are designed to automatically pair when powered on. If they do not connect automatically, or if you need to re-pair them:

1. Dèan cinnteach gu bheil an dà aonad dheth.
2. Long press the power button on both units simultaneously for 5 seconds.
3. The system will enter pairing mode, and the power indicator will flash.
4. Once successfully paired, the power indicator will stay blue.

4. Connecting to Equipment

• Transmitter (TX): Plug the XLR end of the transmitter directly into the XLR output of your dynamic microphone. Ensure it is securely locked.
• Glacadair (RX): Plug the XLR end of the receiver into the XLR input of your audio mixer, PA system, or other audio interface.

Important Note: This system does not support phantom power. It is designed for use with dynamic microphones only. Do not attempt to use it with condenser microphones that require phantom power.

Image: A dynamic microphone made wireless with the ACEMIC G6 transmitter.

Stiùireadh Obrachaidh

Gnìomh mute

While the unit is powered on, a short press of the power button on either the transmitter or receiver will mute the audio. The power indicator will flash. Short press again to unmute, and the indicator will return to a solid blue.

Multiple Sets Operation

The ACEMIC G6 system supports 2-3 sets operating simultaneously in the same location. Each set will automatically select an available channel upon pairing to minimize interference.

Image: The ACEMIC G6 system supporting multiple wireless microphone setups simultaneously.

Coileanadh as Fheàrr

For best performance, ensure a clear line of sight between the transmitter and receiver. Avoid placing units near strong electromagnetic interference sources (e.g., Wi-Fi routers, microwave ovens) which may affect signal quality and range.

Image: Key performance specifications of the ACEMIC G6 system.

Cumail suas

Cùram Bataraidh

• Recharge the units when the power indicator shows low battery (flashing red).
• Seachain a bhith a’ drèanadh a’ bhataraidh gu tur gu tric gus a fad-beatha a leudachadh.
• If storing for an extended period, charge the units to approximately 50% every few months.

Glanadh

Wipe the units with a soft, dry cloth. Do not use liquid cleaners or solvents, as they may damage the device.

Stòradh

Stòraich an siostam ann an àite fionnar, tioram air falbh bho sholas dìreach na grèine agus teòthachd anabarrach.

Fuasgladh thrioblaidean

• Gun fhuaim:
  • Ensure both transmitter and receiver are powered on and paired (solid blue indicator).
  • Check if the microphone is properly connected to the transmitter.
  • Verify the receiver is correctly connected to your audio input device.
  • Confirm the microphone is a dynamic type and does not require phantom power.
  • Check volume levels on your mixer/PA system.
• Bacadh/Droch Chàileachd Fuaime:
  • Move closer to the receiver to reduce distance.
  • Dèan cinnteach nach eil bacadh sam bith eadar an inneal-sgaoilidh agus an glacadair.
  • Avoid operating near other 2.4G wireless devices (e.g., Wi-Fi routers, Bluetooth devices).
  • Re-pair the units to allow them to select a different channel.
• Aonadan nach eil a’ paidhreachadh:
  • Dèan cinnteach gu bheil an dà aonad làn-chosgais.
  • Follow the re-pairing instructions in the Setup section.
• Beatha bataraidh goirid:
  • Dèan cinnteach gu bheil na h-aonadan làn-luchdaichte mus tèid an cleachdadh.
  • Dh’fhaodadh coileanadh bataraidh crìonadh thar ùine le cleachdadh farsaing.

Sònrachaidhean

Barantas agus Taic

ACEMIC products are designed for reliability and performance. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, please refer to the warranty card included in your package or contact ACEMIC customer support.

If you encounter any issues or have questions regarding your ACEMIC G6 system, please contact our customer support team. You can find contact information on the ACEMIC official weblàrach-lìn no tron ​​neach-reic agad.