Hurricane Classic 6-Inch Clip-On Table Fan Instruction Manual

Ro-ràdh

Thank you for choosing the Hurricane Classic 6-Inch Clip-On Table Fan. This portable corded electric fan is designed to provide personal cooling with its two quiet speeds and adjustable tilt feature. It is suitable for various environments such as desks, shelves, homes, offices, or dorms. Please read this manual carefully before use to ensure proper operation and maintenance.

Fiosrachadh Sàbhailteachd Cudromach

Please read and save these safety instructions. Failure to follow these instructions may result in electric shock, fire, or injury.

• Thoir a-mach am pluga den ghunna an-còmhnaidh mus dèan thu glanadh no obair-chàraidh sam bith.
• Do not use the fan near water or in excessively humid environments.
• Keep fingers and other objects away from the fan blades when the fan is operating.
• Ensure the power cord is not damaged or pinched. Do not operate the fan with a damaged cord or plug.
• Do not place the fan on unstable surfaces.
• Chan eil an neach-leantainn seo ach airson a chleachdadh a-staigh.
• Na feuch ri càradh no atharrachadh a dhèanamh air an neach-leantainn thu fhèin. Cuir fios gu luchd-obrach seirbheis teisteanasach airson càradh.

Stiùiridhean rèiteachaidh

Your Hurricane Classic Clip-On Fan is designed for easy setup and versatile placement.

Stàladh an Fan

The fan features a robust clip-on mechanism for secure attachment to various surfaces.

1. Identify a stable surface, such as a desk, shelf, or table edge, that is up to 2 inches thick.
2. Open the fan's clip by pressing the handles together.
3. Position the fan on the desired surface and release the handles to secure the clip firmly. Ensure the fan is stable and does not wobble.

Image: The Hurricane 6-inch clip-on fan attached to a desk, demonstrating its mounting capability.

Ìomhaigh: Mion-fhiosrachadh view of the fan's clip, illustrating its ability to attach to surfaces up to 2 inches thick.

Ag atharrachadh an teilt

The fan head can be tilted to direct airflow precisely where needed.

1. Gently hold the fan head and adjust it to the desired upward or downward angle.
2. The fan is designed to hold its position once adjusted.

Image: The fan head tilted at various angles, demonstrating its adjustable tilt feature.

Stiùireadh Obrachaidh

Cumhachdachadh air agus Smachd Luas

The fan features a 2-speed control switch located on the fan housing.

1. Plug an neach-leantainn a-steach gu ionad dealain àbhaisteach.
2. Locate the switch on the back of the fan.
3. Slide the switch to position "1" for low speed or "2" for high speed.
4. To turn off the fan, slide the switch to the "0" position.

Image: A close-up of the fan's rear, showing the 2-speed control switch labeled '1' and '2'.

Cumail suas

Cuidichidh glanadh cunbhalach le bhith a’ cumail suas coileanadh an neach-leantainn agad agus a’ leudachadh a bheatha.

• Glanadh: Thoir a-mach am pluga bhon ghunna mus glan thu e. Cleachd clò bog, tioram.amp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or allow water to drip into the motor housing.
• Stòradh: Nuair nach eilear ga chleachdadh airson ùine mhòr, stòraich an neach-leantainn ann an àite fionnar, tioram, mas fheàrr san phacaid thùsail aige.
• Chan eil feum air lubrication: The fan motor is permanently lubricated and requires no additional oiling.

Fuasgladh thrioblaidean

This section addresses common issues you might encounter with your Hurricane Classic Clip-On Fan.

Fan Does Not Turn On (No Power)

If your fan has no power after 3 years of use, or at any time, check the fuse located in the plug.

• Thoir sùil air an Power Outlet: Ensure the outlet is functioning by plugging in another appliance.
• Dèan sgrùdadh air a’ fhiùs: Many fans include a fuse within the plug. Carefully open the fuse compartment (refer to the plug's specific design) and check if the fuse is blown. Replace with a fuse of the same rating if necessary.
• Dèan sgrùdadh air a’ chrann cumhachd: Look for any visible damage to the cord or plug. If damaged, discontinue use and contact customer support.

Oscillation Function Not Working Correctly

If the oscillation only works when actively pulling down on the oscillation cord, it indicates the mechanism may not be fully engaged.

• Engaging Oscillation: Pull the oscillation cord firmly downwards until you hear a distinct "click." This ensures the oscillation mechanism is fully engaged. If it does not click, try pulling slightly harder.
• Disengaging Oscillation: Pull the oscillation cord again to disengage the function.

Tilt Function Not Holding Position

If the fan head springs back up after being tilted, the internal gear system may need to be reset.

• Repeated Adjustment: Gently pull the fan head down to the desired tilt position. If it springs back, repeat the action several times. The internal gears should eventually engage and hold the position as intended.

Sònrachaidhean

Barantas agus Taic

For warranty information or technical support, please refer to the product packaging or contact Hurricane customer service. Keep your purchase receipt as proof of purchase.