ACEMIC G1 2.4GHz Wireless Guitar System Instruction Manual

1. Ro-ràdh

The ACEMIC G1 is a 2.4GHz wireless audio transmission system designed for musical instruments. It provides a stable, low-latency connection, freeing musicians from the constraints of cables. This manual will guide you through the setup, operation, and maintenance of your G1 wireless system.

Image: The ACEMIC G1 wireless transmitter and receiver units.

2. Toradh thallview

2.1 Prìomh fheartan

• Teicneòlas gun uèir 2.4GHz: Ensures high signal stability, low interference, and minimal audio delay.
• Ultra-ìosal Latency: Less than 5ms latency for real-time performance without lag or signal loss.
• Raon Tar-chuir Leudaichte: Up to 100 feet (30 meters) in open areas.
• Gnìomh mute: Convenient one-button mute/unmute capability.
• Taic ioma-seanail: Supports up to 2-3 sets operating simultaneously without interference.
• Bataraidh ath-thagraidh maireannach: Provides up to 6 hours of continuous use on a 3-hour charge.
• 250-Degree Rotatable Plug: Accommodates various instrument input jack positions.
• Co-fhreagarrachd farsaing: Suitable for most electric guitars, bass, electric-acoustic guitars, and other digital music instruments with a 1/4" (6.35mm) jack.

Image: High-quality audio transmission with ultra-low latency.

2.2 Susbaint a’ phacaid

The ACEMIC G1 system typically includes the following items:

• 1 x Wireless Transmitter (T)
• 1 x Wireless Receiver (R)
• 1 x Dual-port USB Charging Cable
• 1 x Leabhar-làimhe Cleachdaiche

Image: Contents of the ACEMIC G1 Wireless Guitar System package.

Airson coitcheann thairisview of the ACEMIC G1 Wireless Guitar System, you may watch this video:

3. Suidhich

3.1 A’ cur cosgais air na h-aonadan

Before first use, fully charge both the transmitter and receiver. Use the included dual-port USB charging cable to charge both units simultaneously. A full charge typically takes about 3 hours and provides up to 6 hours of continuous use.

Image: The ACEMIC G1 transmitter and receiver being charged simultaneously.

3.2 A’ paidhreachadh an tar-chuir agus an glacadair

The G1 system is designed for automatic pairing. Follow these steps:

1. Long press the power button on the transmitter (T) until the blue light flashes quickly.
2. Long press the power button on the receiver (R) until its blue light also flashes quickly.
3. Once paired, the blue lights on both the transmitter and receiver will remain solid, indicating a successful connection.

For a visual guide on pairing, please refer to the official operation video below:

Note on Multi-Set Usage: If using 2-3 sets of G1 systems simultaneously, ensure each transmitter is at least 2 meters away from other transmitters to prevent interference. Each transmitter/receiver pair operates on its own channel.

Image: Illustration of multiple ACEMIC G1 systems operating simultaneously.

3.3 Connecting to Instruments and Ampluchd-losgaidh

The G1 system features 1/4" (6.35mm) plugs that can rotate 250 degrees, allowing for flexible connection to various instruments and amplifiers regardless of their input jack orientation.

1. Plug an transmitter (T) into your electric guitar, bass, or other compatible instrument's 1/4" output jack.
2. Plug an receiver (R) a-steach do amplifier, effect pedal, mixer, or other audio input device's 1/4" input jack.

Image: The 250-degree rotatable plug design for versatile connections.

Image: The ACEMIC G1 system's broad compatibility with musical instruments.

4. Stiùireadh Obrachaidh

4.1 Cumhachd air / dheth

To power on or off either the transmitter or receiver, long press its respective power button until the indicator lights respond.

4.2 Gnìomh mute

While the unit is powered on, a short press of the power button on the transmitter will toggle the mute function. The blue light will blink to indicate that the unit is muted. Another short press will unmute it, and the blue light will become solid again.

4.3 Comharran Comharran

Both the transmitter and receiver feature LED indicators to show battery level and connection status:

• Comharra cumhachd bataraidh: A’ taisbeanadh ìre cosgais làithreach a’ bhataraidh.
• Comharra bataraidh ìosal: A ’toirt rabhadh dhut nuair a tha am bataraidh a’ ruith ìosal.
• Signal/Pairing Indicator: Shows connection status (flashing blue for pairing, solid blue for connected, blinking blue for muted).

Ìomhaigh: Mion-fhiosrachadh view of the ACEMIC G1 units showing LED indicators.

5. Cumail suas

• Cùm na h-aonadan glan le bhith gan sguabadh le clò bog, tioram.
• Seachain na h-aonadan a nochdadh do theodhachd anabarrach, taiseachd no solas dìreach na grèine.
• Store the units in a dry, cool place when not in use.
• Do not attempt to disassemble or repair the units yourself, as this may void the warranty.

6. A ’dèanamh trioblaid

7. Sònrachaidhean

• Còmhlan tricead: 2.4GHz
• Ùine: Nas lugha na 5ms
• Freagairt tricead: 20Hz-20kHz
• Raon Tar-chuir: Suas gu 100 troigh (30 meatairean)
• Seòrsa bataraidh: Polymer lithium (air a ghabhail a-steach)
• Beatha bataraidh: Mu 6 uair a thìde de chleachdadh leantainneach
• Ùine cosgais: Mu 3 uair a thìde
• Cuideam nì: 8.8 unnsa
• Meudan toraidh: 1.85 x 0.63 x 5.51 òirleach
• Àireamh Modail: G1

8. Barantas agus Taic

For warranty information or technical support, please refer to the documentation included in your product package or contact ACEMIC customer service directly. You can often find support contact details on the manufacturer's official weblàrach-lìn no tron ​​neach-reic far an deach an toradh a cheannach.

For additional resources and product information, visit the ACEMIC weblàrach: www.acemic.com