YUHANUS Electric Drop Bolt Lock Instruction Manual

1. Toradh thallview

The YUHANUS Electric Drop Bolt Lock is designed for use in access control systems, providing enhanced security for various door types. This model operates in NO Mode (Fail-Security), meaning the lock is in a locked state by default when power is off. It will only unlock when power is applied and an authorized signal (e.g., from a push button or remote controller) is received. It features a time delay function for controlled access.

Image 1.1: The YUHANUS Electric Drop Bolt Lock, showcasing its compact design and wiring.

2. Fiosrachadh Sàbhailteachd

• Ensure all power is disconnected before installation or maintenance to prevent electrical shock.
• Installation should be performed by qualified personnel or under professional supervision.
• Dearbhaich ceart voltage (DC 12V) and current specifications before connecting to a power source. Incorrect voltagfaodaidh e an inneal a mhilleadh.
• Do not expose the lock to excessive moisture or extreme temperatures.
• Lean còdan is riaghailtean dealain ionadail an-còmhnaidh.

3. Pasgan-susbaint

Thoir sùil air a’ phacaid gus dèanamh cinnteach gu bheil a h-uile nì an làthair:

• Electric Mortise Lock Unit
• Còmhdach pannal
• Induction Lock Component
• Mounting Screws (Set)
• Leabhar-làimhe Stiùiridh (An sgrìobhainn seo)
• Teisteanas Co-chòrdaidh

Image 3.1: Contents typically included in the product package, showing the lock units, screws, and a small instruction sheet.

4. Sònrachaidhean

Image 4.1: Detailed dimensions of the electric drop bolt lock for installation planning.

5. Setup agus Stàladh

5.1 Mounting the Lock

1. Prepare the Door and Frame: Identify the desired mounting location on the door frame and the corresponding position on the door for the bolt to engage. The lock is surface-mounted.
2. Comharraich Puingean Drileadh: Use the lock unit as a template to mark the screw holes on both the door frame and the door.
3. Tuill Pìleat Drile: Drill appropriate pilot holes for the mounting screws.
4. Dèan cinnteach gu bheil an glas tèarainte: Attach the main lock unit to the door frame and the induction lock component to the door using the provided screws. Ensure proper alignment for smooth bolt operation.

5.2 Stiùireadh uèiridh

The electric drop bolt lock requires connection to a DC 12V power supply and an access control system. Refer to the wiring diagram below for proper connections.

• Càball Dearg: Ceangail ris an +12V terminal of your power supply control.
• Càball Dubh: Ceangail ris an GND (Ground) terminal of your power supply control.
• Purple Cable: Ceangail ris an CHAN EIL (Normally Open) terminal in your power supply control or access control panel. This connection is crucial for the Fail-Security (NO Mode) operation.
• Càbaill eile: Yellow and White cables are typically for door status feedback (NC/COM), which may or may not be used depending on your access control system's requirements. Consult your access control system manual for these connections.

Image 5.1: Wiring diagram illustrating connections for the electric bolt lock within a typical access control system, including power supply, keypad, and exit button.

6. Stiùireadh Obrachaidh

6.1 NO Mode (Fail-Security) Operation

This electric drop bolt lock operates in NO Mode (Fail-Security). This means:

• When there is no power, or in case of a power failure, the lock remains in a locked state.
• The lock will only unlock when power is supplied to the lock and an authorized signal is received from the access control system (e.g., pressing a push button, using a remote controller, or entering a code on a keypad).

6.2 Time Delay Function

The lock features an adjustable time delay function, which controls how long the door remains unlocked after an authorized signal is received. The delay can be set to 0 seconds, 3 seconds, or 6 seconds.

To adjust the time delay, locate the small switch or jumper on the side of the lock unit (refer to Image 6.1). Move the switch or adjust the jumpers to select the desired delay setting (0s, 3s, or 6s).

Ìomhaigh 6.1: Sealladh dlùth view of the time delay adjustment switch on the lock unit, allowing selection between 0, 3, and 6 seconds.

7. Cumail suas

• Glanadh: Wipe the lock's exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or internal components.
• Sgrùdadh: Periodically check all mounting screws to ensure they are tight. Inspect wiring for any signs of wear, fraying, or loose connections.
• Deuchainn gnìomh: Regularly test the lock's operation with your access control system to ensure it locks and unlocks correctly and that the time delay functions as expected.

8. A ’dèanamh trioblaid

9. Barantas agus Taic

For warranty information or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Manufacturer: YuHan

Àireamh Modail: 769894490600