Generic KL22G-64T TV Mount Instruction Manual

Ro-ràdh

Thank you for choosing the Generic KL22G-64T TV Mount. This mount is designed to securely hold flat-panel televisions ranging from 37 to 70 inches, supporting VESA patterns up to 600x400mm, and features a tilt function for optimal viewing angles. Please read this manual thoroughly before installation to ensure safe and correct setup.

Susbaint pacaid

Verify that all components are present and undamaged. If any parts are missing or defective, please contact customer support.

• Wall Plate (A)
• TV Brackets (B x2)
• Mounting Hardware Kit (C) - Includes various screws, washers, spacers, and anchors.
• Leabhar-làimhe Stiùiridh (An sgrìobhainn seo)

Image: All components included in the KL22G-64T TV Mount package.

Fiosrachadh Sàbhailteachd Cudromach

RABHADH: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer.

• Do not install this product on a wall that is not structurally sound.
• Dèan cinnteach gum faod an uachdar-shuidheachaidh cuideam còmhla an t-suidheachaidh agus an telebhisean agad a ghiùlan gu sàbhailte.
• Always use a stud finder to locate wood studs or consult a professional for concrete/brick wall installations.
• Na gabh thairis air a’ chuideam as àirde de 45 kg (99 lbs).
• Tha an toradh seo airson a chleachdadh a-staigh a-mhàin.
• Cùm clann is peataichean air falbh rè an stàladh.

Stàladh agus stàladh

Innealan a dhìth (Gun a thoirt a-steach)

• Screwdriver Ceann Phillips
• Drill with appropriate drill bits (e.g., 10mm for concrete/brick, 5.5mm for wood studs)
• Neach-lorg Stud
• Ìre
• Teip Tomhais
• Peansail
• Òrd (airson acairean concrait)

Step 1: Attaching TV Brackets to Your TV

Cuir an telebhisean agad gu faiceallach le aghaidh sìos air uachdar bog, glan gus casg a chur air milleadh air an sgrion.

1. Comharraich na tuill sreap VESA air cùl an Tbh agad.
2. Select the correct diameter and length of screws (M4, M6, or M8) from the hardware kit (C) that fit your TV's mounting holes. Use washers and spacers if necessary to ensure a snug fit without overtightening.
3. Attach the two TV Brackets (B) to the back of your TV using the selected screws. Ensure the brackets are centered and level, with the hooks facing downwards.

Image: Attaching the TV brackets to the rear of the television.

Step 2: Mounting the Wall Plate to the Wall

Determine the desired height for your TV. Use a level and pencil to mark the drilling locations.

1. Airson Stàladh Stàidean Fiodha: Use a stud finder to locate the center of two adjacent wood studs. Position the Wall Plate (A) against the wall, ensuring it is level, and mark the drilling points within the studs. Drill pilot holes (approx. 5.5mm diameter) into the studs. Secure the Wall Plate (A) using the lag bolts and washers provided in hardware kit (C).
2. Airson stàladh balla concrait/breige: Position the Wall Plate (A) against the wall, ensuring it is level, and mark the drilling points. Drill pilot holes (approx. 10mm diameter) to a depth of at least 50mm. Insert the concrete anchors into the drilled holes, tapping gently with a hammer if needed. Secure the Wall Plate (A) using the lag bolts and washers into the anchors.

Image: Securing the wall plate to the chosen mounting surface.

Step 3: Mounting the TV to the Wall Plate

This step typically requires two people for safety.

1. Carefully lift the TV with the attached brackets.
2. Align the hooks on the TV Brackets (B) with the top edge of the Wall Plate (A).
3. Gently lower the TV, ensuring the brackets engage securely with the wall plate. You should hear a click or feel the TV settle into place.
4. Locate the safety screws or locking mechanisms on the bottom of the TV Brackets. Tighten these screws to prevent the TV from accidentally lifting off the wall plate.

Image: Hanging the television onto the wall plate and securing it.

Stiùireadh Obrachaidh

Ag atharrachadh ceàrn teilt

The KL22G-64T mount allows for easy tilt adjustment to reduce glare and optimize your viewann an eòlas.

• To adjust the tilt, gently push the bottom of the TV forward or pull it back to achieve the desired angle.
• Some models may have knobs or levers on the side of the TV brackets that need to be loosened before tilting and tightened afterward to secure the angle. Refer to the specific design of your TV brackets.

Cumail suas

Regular maintenance ensures the longevity and safety of your TV mount.

• Periodically check all screws and bolts to ensure they are tight and secure. Do not overtighten.
• Inspect the mount for any signs of wear, damage, or corrosion.
• Glan an sliabh le clò bog, tioram. Seachain innealan-glanaidh no fuasglaidhean sgrìobach.
• If you notice any issues, discontinue use and contact customer support.

Fuasgladh thrioblaidean

Sònrachaidhean

Barantas agus Taic

This Generic TV Mount comes with a limited warranty against defects in materials and workmanship. Please refer to the warranty card included in your package or visit our website for detailed terms and conditions. Keep your purchase receipt as proof of purchase.

For technical assistance, missing parts, or warranty claims, please contact our customer support team:

• Post-d: support@genericmounts.com
• Fòn: 1-800-XXX-XXXX (Monday-Friday, 9 AM - 5 PM EST)
• Weblàrach: www.genericmounts.com/support

Note: As no specific warranty or support information was provided, generic contact details are used as placeholders.