Eureka Mignon Libra Espresso Grinder

Ro-ràdh

Welcome to the Eureka Mignon Libra Espresso Grinder instruction manual. This guide provides essential information for the safe and effective use of your new espresso grinder. The Eureka Mignon Libra is designed for precision espresso grinding, featuring grind-by-weight technology, 55mm hardened steel burrs, stepless grind adjustment, and silent operation.

Am measg nam prìomh fheartan tha:

• Espresso Grinder: Specifically designed for grinding directly into your portafilter for espresso.
• Weight-Based Dosing: Eureka's first grind-by-weight product, programmable in grams with two savable dose settings.
• Teicneòlas Sàmhach: An exclusive anti-vibration solution reduces grinding noise (around 64 dB) for a quieter experience.
• 55mm Burrs: Equipped with hardened steel 55mm burrs, balancing grind quality with speed for accurate weighted dosing.
• Stepless Grind Adjustment: Multi-revolution knob for precise, near-infinite grind adjustability.
• Bottom Burr Adjustment: Grind adjustments are made below the motor, maintaining grind range consistency between cleanings.
• Dosing Funnel: An included dosing funnel helps reduce mess when dosing larger amounts into your basket.

Fiosrachadh Sàbhailteachd Cudromach

Leugh a h-uile stiùireadh gu faiceallach mus cleachd thu an inneal. Cùm an leabhar-làimhe seo airson fiosrachadh san àm ri teachd.

• Ensure the grinder is placed on a stable, level surface.
• Na bog an inneal, an corda, no plug a-steach uisge no lioftaichean eile.
• Thoir air falbh bhon ionad nuair nach eilear ga chleachdadh, mus cuir thu air no cuir dheth pàirtean, agus mus glanadh thu.
• Seachain conaltradh le pàirtean gluasadach.
• Na obraich inneal sam bith le sreang no pluga millte, no às deidh don inneal a dhol ceàrr no a bhith air a mhilleadh ann an dòigh sam bith.
• Cleachd dìreach ceanglachan a tha air am moladh no air an reic leis an neach-dèanamh.
• Tha an inneal seo airson cleachdadh dachaigh a-mhàin.

Com-pàirtean thairisview

Familiarize yourself with the main components of your Eureka Mignon Libra grinder.

• Bean Hopper: Soitheach follaiseach airson pònairean cofaidh slàn.
• Còmhdach Hopper: A’ còmhdach an t-soitheach pònairean.
• Grind Adjustment Knob: Located on the top right side, used to adjust grind fineness.
• Pannal Taisbeanaidh: Digital screen with controls for dose settings.
• Sealbhdair Portafilter: Adjustable holder for your portafilter, integrated with a load sensor for weight-based dosing.
• Grinding Outlet: Where ground coffee dispenses.
• Switch cumhachd: On/Off switch, typically located on the side or back.
• Dosing Funnel: Accessory for cleaner dosing.

Taobh-aghaidh view of the Eureka Mignon Libra Espresso Grinder, highlighting its compact design and digital display. Dimensions are shown as 6 inches wide, 6 inches deep, and 14 inches high. The bean hopper is visible at the top.

Suidhich

1. A' dì-phapadh: Thoir a h-uile pàirt a-mach às a’ phacaid gu faiceallach. Cùm am pasgan airson còmhdhail no stòradh san àm ri teachd.
2. Suidheachadh: Cuir am bleith-choire air uachdar seasmhach, rèidh, agus tioram. Dèan cinnteach gu bheil fionnarachadh iomchaidh timcheall an aonaid.
3. Cruinneachadh Hopper:
   • Insert the bean hopper into its seat on top of the grinder.
   • Place the hopper lid on top of the bean hopper.
   • Ensure the hopper is securely in place to prevent accidental removal during operation.
4. Ceangal cumhachd: Plug an sreang cumhachd a-steach do ionad dealain stèidhichte.
5. Glanadh tùsail: Mus cleachd thu an toiseach, sguab sìos an taobh a-muigh le sanasamp cloth. Run a small amount of old coffee beans through the grinder to season the burrs and clear any manufacturing residue. Discard these grounds.

The Eureka Mignon Libra Espresso Grinder is shown on a wooden countertop, ready for use. A hand is seen tamping coffee in a portafilter, demonstrating the grinder's integration into an espresso preparation workflow.

Stiùireadh Obrachaidh

1. A’ lìonadh an Hopper: Lift the hopper lid and pour fresh, whole coffee beans into the hopper. Replace the lid.
2. Adjusting Grind Fineness:
   • The Eureka Mignon Libra features a stepless grind adjustment system.
   • Turn the grind adjustment knob (usually on the top right) to achieve the desired fineness. Turning clockwise typically results in a finer grind, and counter-clockwise for a coarser grind.
   • Note: Make small adjustments and test the grind. It is recommended to adjust the grind while the motor is running to prevent burr damage.
3. Setting the Dose (Weight-Based Dosing):
   • Place your portafilter into the adjustable holder. The integrated load sensor will detect its presence.
   • Use the digital display and control buttons (+/-) to set your desired dose in grams. The grinder allows saving two different dose settings (e.g., for single and double shots).
   • Refer to the display for current dose settings and adjustments.
4. A' bleith cofaidh:
   • Once the dose is set and the portafilter is in place, the grinder will automatically start grinding to the programmed weight.
   • The display will show the progress of the grind.
   • Stadaidh an inneal-bleith gu fèin-ghluasadach aon uair ‘s gun ruig e an cuideam targaid.
5. Removing Portafilter: Carefully remove the portafilter from the holder.
6. Tamping and Brewing: Tamp the ground coffee in your portafilter and proceed with your espresso brewing process.

A mionaideach view of the Eureka Mignon Libra's digital display, illustrating the intuitive interface for setting and monitoring coffee dose in grams. The plus and minus buttons for adjustment are clearly visible.

A close-up image of the 55mm hardened steel burrs used in the Eureka Mignon Libra Espresso Grinder, highlighting their robust construction designed for consistent and precise grinding.

Glanadh agus cumail suas

Regular cleaning and maintenance will ensure the longevity and optimal performance of your Eureka Mignon Libra grinder.

1. Glanadh làitheil:
   • After each use, brush away any residual coffee grounds from the grinding outlet and portafilter holder.
   • Sguab taobh a-muigh a’ mhuileann-bleith le clò bog, damp aodach. Na cleachd innealan-glanaidh sgudail.
2. Glanadh an t-sloc-uisge:
   • Empty any remaining beans from the hopper.
   • Remove the hopper and wash it with warm, soapy water. Rinse thoroughly and dry completely before reattaching.
3. Burr Cleaning (Periodic):
   • Important: Always unplug the grinder before performing any deep cleaning or maintenance.
   • To access the burrs, you may need to remove the top burr carrier. Consult the specific instructions for your model for detailed steps.
   • Use a stiff brush or a vacuum cleaner to remove accumulated coffee oils and grounds from the burrs and grinding chamber.
   • Never wash burrs with water, as this can cause rust and damage.
   • Reassemble all parts securely after cleaning.
4. Bottom Burr Adjustment: The bottom burr adjustment design allows for easier cleaning without losing your grind setting. After cleaning, reassemble and ensure the burr carrier is properly seated.

Fuasgladh thrioblaidean

If you encounter issues with your Eureka Mignon Libra grinder, refer to the following common problems and solutions.

For issues not listed here, or if solutions do not resolve the problem, please contact Eureka customer support.

Sònrachaidhean Teicnigeach

Barantas agus Taic Luchd-cleachdaidh

Your Eureka Mignon Libra Espresso Grinder is covered by a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions.

For technical assistance, spare parts, or warranty claims, please contact Eureka customer support through their official weblàrach no an neach-reic far an deach an toradh a cheannach.

Cùm dearbhadh do cheannach airson dearbhadh barantais.