Atlanta Digital LED Alarm Clock 2604/0 User Manual

Ro-ràdh

Thank you for choosing the Atlanta Digital LED Alarm Clock, Model 2604/0. This alarm clock features a large, continuously illuminated white LED display, adjustable brightness, two separate alarms with crescendo function, and a convenient USB charging port. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance of your device.

Suidhich

1. Ceangal Cumhachd

Connect the provided power adapter to the DC5V port on the back of the alarm clock. Plug the adapter into a standard 230V electrical outlet. The clock requires a permanent power connection for full functionality.

Image: The Atlanta Digital Alarm Clock shown with its included power adapter and USB connection cable.

2. Cùl-taic bataraidh

The alarm clock includes an integrated CR2032 button cell battery (1 CR2032 - included). This battery serves as a backup to protect programmed data (time and alarm settings) in case of a power outage. It does not power the display or alarm functions independently.

Ìomhaigh: Cùl view of the alarm clock, highlighting the battery compartment, DC5V input, USB port, and control buttons/sliders.

Stiùireadh Obrachaidh

1. A ’suidheachadh na h-ùine

1. Brùth agus cùm an SEANN TIOMNAIDH button (located on the right side of the back panel) for 2 seconds until the display flashes.
2. Cleachd an 12/24 HR button (left side of the back panel) to adjust the hours.
3. Brùth an SEANN TIOMNAIDH putan a-rithist gus gluasad gu atharrachadh mionaidean. Cleachd am putan 12/24 HR putan gus na mionaidean atharrachadh.
4. Brùth an SEANN TIOMNAIDH putan a-rithist gus dearbhadh agus modh suidheachadh ùine fhàgail.

To switch between 12-hour and 24-hour display formats, briefly press the 12/24 HR button when not in time setting mode.

Image: Front display of the alarm clock showing the time "12:50 PM".

2. A ’suidheachadh an inneal-rabhaidh

The clock supports two separate alarms.

1. Brùth agus cùm an SET ALARM button (located on the right side of the back panel, below TIME SET) for 2 seconds until the alarm time flashes.
2. Cleachd an 12/24 HR putan gus uairean an rabhaidh atharrachadh.
3. Brùth an SET ALARM putan a-rithist gus gluasad gu atharrachadh mionaidean. Cleachd am putan 12/24 HR putan gus mionaidean an rabhaidh atharrachadh.
4. Brùth an SET ALARM putan a-rithist gus dearbhadh agus modh suidheachadh an rabhaidh fhàgail.
5. To activate or deactivate an alarm, briefly press the AL. ON/OFF button (left side of the back panel, below 12/24HR). An indicator on the display will show if the alarm is active.

Tha feartan aig an inneal-rabhaidh Crescendo function, meaning the alarm sound starts softly and gradually increases in intensity.

3. Gnìomh Snooze

Nuair a chluinneas tu an inneal-rabhaidh, brùth air a’ phutan mhòr SNOZE button on the top of the clock. This will temporarily silence the alarm for 5 minutes. The alarm will resume after 5 minutes.

4. Taisbeanadh Atharrachadh soilleireachd

Adjust the display brightness using the DIMMHOR slider located on the back panel. Slide it from "LOW" to "HIGH" to achieve your desired brightness level. The brightness is continuously adjustable.

5. Alarm Volume Adjustment

Adjust the alarm sound volume using the LUACHMHOR slider located on the back panel. Slide it from "LOW" to "HIGH" to set the desired alarm volume. The volume is continuously adjustable.

6. Port Cìsean USB

A USB port is located on the back of the alarm clock. You can use this port to charge other devices, such as a mobile phone. Connect your device's USB charging cable to this port.

Cumail suas

• To clean the clock, use a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Cùm an inneal air falbh bho uisge agus àrd taiseachd.
• Seachain a bhith a’ nochdadh a’ chloc do sholas dìreach na grèine no teòthachd anabarrach.
• If the backup battery needs replacement, ensure to use a CR2032 type battery.

Fuasgladh thrioblaidean

Display is too bright or too dim:

Atharraich an DIMMHOR slider on the back panel. While the brightness is continuously adjustable, some users may find the minimum brightness still too high for a dark bedroom.

Clock loses time or settings during a power outage:

Ensure the CR2032 backup battery is correctly installed and functional. The backup battery preserves settings but does not power the display or alarm during an outage. If the battery is old or depleted, replace it.

Chan eil fuaim an rabhaidh:

• Check if the alarm is activated using the AL. ON/OFF button. An indicator should be visible on the display.
• Dèan cinnteach gu bheil an LUACHMHOR slider is not set to "LOW" or minimum.
• Verify that the alarm time is set correctly.

USB charging port not working:

Ensure the alarm clock is properly connected to a power source. The USB port requires the clock to be powered. Check the charging cable of your device.

Sònrachaidhean

Barantas agus Taic

For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer.