Barska AX13744 2.02 Cu Ft Fireproof Biometric Safe Instruction Manual

1. Ro-ràdh

This manual provides essential information for the safe and efficient operation of your Barska AX13744 2.02 Cu Ft Fireproof Biometric Safe. Please read these instructions carefully before installation and use. The safe is designed to provide high security for your valuables with thick steel construction, fire protection, and multiple access options.

Figear 1: Aghaidh view of the Barska AX13744 Biometric Safe.

2. Fiosrachadh Sàbhailteachd

• Cùm iuchraichean èiginn ann an àite tèarainte air falbh bhon t-sàif an-còmhnaidh. Na stòraich iad taobh a-staigh an t-sàif.
• Dèan cinnteach gu bheil an seif air a chuir suas gu tèarainte gus casg a chuir air a thoirt air falbh gun chead.
• Do not expose the safe to extreme temperatures or humidity beyond its specified operating conditions.
• Thoir sùil cunbhalach air ìrean a’ bhataraidh gus dèanamh cinnteach gu bheil an glas dealain ag obair ceart.
• Cùm doras an t-sàbhailte dùinte agus glaiste nuair nach eilear ga chleachdadh.

3. Pasgan-susbaint

Dèan cinnteach gu bheil na nithean gu lèir a tha air an liostadh gu h-ìosal air an toirt a-steach don phacaid agad:

• Barska AX13744 Safe Unit
• 2 Adjustable Shelves with Shelf Brackets
• 4 Bataraidh AA
• Mounting Hardware (bolts, anchors)
• Set of Emergency Back-Up Keys (2 keys)

Figear 2: Co-phàirtean agus tomhasan toraidh a tha air an toirt a-steach.

4. Suidhich

4.1. Stàladh bataraidh

1. Lorg roinn a’ bhataraidh air taobh a-staigh doras an t-sàbhailte.
2. Insert the 4 AA batteries (included) according to the polarity indicators (+/-).
3. Dùin an còmhdach roinn bataraidh gu tèarainte.

4.2. Initial Access and Opening

Upon first use, open the safe using the emergency keys:

1. Lorg còmhdach an toll-iuchrach air a’ mheur-chlàr dealain.
2. Remove the cover to expose the keyhole.
3. Cuir a-steach aon de na h-iuchraichean èiginn agus tionndaidh e deiseal fhad ’s a tha thu a’ tionndadh an làmh aig an aon àm gus doras an t-sàbhailte fhosgladh.
4. Once open, you can proceed with programming fingerprints and PIN codes.

4.3. A’ cur suas an t-sàbhailte

The safe is designed for floor mounting to enhance security. Use the provided mounting hardware.

1. Choose a suitable location for the safe, ensuring a stable surface.
2. Mark the pre-drilled mounting points on the floor through the safe's base.
3. Drill pilot holes into the floor at the marked locations.
4. Position the safe over the holes and secure it using the provided bolts and anchors.
5. Ensure the safe is firmly attached and does not wobble.

Figear 3: Taobh a-staigh view of the safe with adjustable shelves.

5. Stiùireadh Obrachaidh

5.1. Biometric Fingerprint Access

The safe can store up to 160 distinct fingerprints.

1. To program a fingerprint, press the programming button located inside the safe.
2. Place your finger on the biometric scanner. The indicator light will confirm successful scanning.
3. Repeat the scan multiple times for better accuracy.
4. To open the safe, place a registered finger on the scanner. Once recognized, turn the handle to open.

5.2. Keypad PIN Code Access

The safe supports up to 2 unique PIN codes.

1. To program a PIN code, press the programming button inside the safe.
2. Enter your desired PIN code (4-8 digits) on the keypad, followed by the '#' key.
3. Repeat the process to confirm the PIN code.
4. To open the safe, enter your programmed PIN code followed by '#'. Once confirmed, turn the handle to open.

5.3. Ruigsinneachd Iuchrach Èiginn

In case of battery failure or forgotten codes, use the emergency keys as described in Section 4.2.

Figure 4: Emergency access using a 9V battery (not included).

5.4. Siostam rabhaidh

• Motion Sensor Alarm: The safe features a programmable motion sensor alarm that will activate if the safe is disturbed.
• Modh glasaidh a-mach: The safe will enter a lockout mode after 3 incorrect PIN codes or 5 unsuccessful fingerprint scans.
• Programmable Silent Access Mode: This mode allows for discreet entry without audible feedback. Refer to the full manual for programming details.

5.5. Solas LED a-staigh

The safe is equipped with an internal LED light that illuminates the interior when the door is opened, improving visibility of contents.

5.6. Sgeilpichean a ghabhas atharrachadh

The two included shelves can be adjusted to different heights to accommodate various item sizes. Simply remove the shelf brackets, reposition them to the desired height, and reinsert the shelves.

6. Cumail suas

• Glanadh: Sguab taobh a-muigh an t-seif le clò bog,amp clò. Seachain innealan-glanaidh sgrìobach no fuasglaidhean.
• Ath-nuadhachadh bataraidh: Replace the AA batteries annually or when the low battery warning indicator appears. Use high-quality alkaline batteries.
• Inneal glasaidh: Do not lubricate the lock mechanism. If the lock becomes stiff, contact customer support.

7. A ’dèanamh trioblaid

8. Sònrachaidhean

Figure 5: Fire resistance features of the safe.

9. Barantas agus Taic

Airson fiosrachadh barantais, thoir sùil air fiosrachadh oifigeil an neach-dèanamh website or contact Barska customer support directly. Replacement parts or accessories can also be requested through their weblàrach.

Ceistean Cumanta:

• Are replacement parts or accessories available for this product if needed? Feuch an tadhal thu air ar website to request keys or replacement parts.