Leabhar-làimhe Cleachdaiche airson Gearradair Feòir is Phreasan gun Uèir WORKPRO 3.6V

Ro-ràdh

Thank you for choosing the WORKPRO 3.6V Cordless Grass and Shrub Shear. This versatile 2-in-1 tool is designed for efficient trimming of grass edges and small shrubs. It features a lightweight design, powerful motor, and a long-lasting battery for convenient outdoor use. Please read this manual carefully before operation to ensure safe and effective use of the product.

Image: The WORKPRO 3.6V Cordless Grass and Shrub Shear, showing the main unit, the grass shear blade, the shrub shear blade, and the Type-C charging cable.

Fiosrachadh Sàbhailteachd

Cùm sùil an-còmhnaidh air ceumannan sàbhailteachd bunaiteach nuair a bhios tu a’ cleachdadh innealan dealain gus cunnart teine, clisgeadh dealain agus leòn pearsanta a lughdachadh.

• Leugh an Leabhar-làimhe: Leugh agus tuig a h-uile stiùireadh mus cleachd thu an inneal.
• Cùm an sgìre glan: Cùm clann, daoine a tha nan seasamh, agus peataichean air falbh bhon raon obrachaidh.
• Cuir ort uidheam dìon: Always wear safety glasses, gloves, and appropriate footwear.
• Avoid Contact with Blades: Never touch the blades while the tool is running or connected to power.
• Greim tèarainte: Cum an inneal gu daingeann leis an dà làmh an-còmhnaidh fhad ‘s a tha e ag obair.
• Double Switch Safety: The tool features a double switch mechanism to prevent accidental activation. Ensure both switches are engaged for operation.
• A' cur cosgais: Use only the provided Type-C charging cable and a compatible 5V/1A charger. Do not use the tool while charging.
• Stòradh: Stòraich an inneal ann an àite tioram, sàbhailte, a-mach à ruigsinneachd chloinne.

Image: Close-up of the ergonomic safety lock and ON/OFF switch, highlighting the dual activation mechanism for safe operation.

Susbaint pacaid

Dèan cinnteach gu bheil a h-uile nì an làthair agus ann an deagh staid nuair a dh’fhosglas tu am pasgan:

• 1 x WORKPRO Grass and Shrub Shear Unit
• 1 x Grass Blade (75 mm wide)
• 1 x Shrub Blade (120 mm length)
• 1 x càball cosgais Type-C
• 1 x Leabhar-làimhe Cleachdaiche

Bathar seachadview

Familiarize yourself with the components of your WORKPRO shear:

Image: Diagram showing key components: Type-C Charging Port with Indicator, Type-C Cable (1M), Safety Lock-off Button, ON/OFF Switch, Blade Release Button, TPR Anti-Slip Handle, and Shrub Blade. The unit weighs approximately 370g.

• Prìomh Aonad: Ergonomic body with integrated motor and battery.
• Grass Blade: Designed for trimming grass edges, 75mm cutting width.
• Lann Preas: Designed for shaping shrubs and small branches, 120mm cutting length.
• Port cosgais Type-C: Airson ath-lìonadh a’ bhataraidh a-staigh.
• Putan Glasaidh Sàbhailteachd: A’ cur casg air tòiseachadh gun fhiosta.
• Switch AIR / OFF: Activates the motor when the safety lock is disengaged.
• Putan Sgaoileadh Blade: A’ leigeil le atharrachaidhean lann luath is furasta.
• Làmh-làimhe TPR an-aghaidh sleamhnachadh: A’ toirt seachad greim comhfhurtail is tèarainte.

Suidhich

A 'cur cosgais air a' bhataraidh

The tool is equipped with a 2000mAh Lithium-ion battery. Before first use, fully charge the battery.

1. Lorg am port cosgais Seòrsa-C air an inneal.
2. Connect the provided Type-C charging cable to the tool and to a 5V/1A USB power source (e.g., power bank, Type-C charger, car charger, laptop/PC USB port). Note: USB charging brick is not included.
3. The charging indicator light will illuminate (typically red) during charging.
4. Once fully charged, the indicator light will change (typically green). Charging time is approximately 2-3 hours.
5. Cuir às don charger aon uair ‘s gu bheil an cosgais deiseil.

Image: Illustration of the WORKPRO shear being charged via a Type-C cable, showing compatible power sources like a power bank, Type-C charger, car charger, and laptop/PC. The charging indicator lights (red for charging, green for fully charged) are also depicted.

Stàladh/Atharrachadh lannan

Ensure the tool is turned off and disconnected from any power source before changing blades.

1. Press the Blade Release Button located on the top of the tool.
2. Carefully remove the currently installed blade by pulling it away from the unit.
3. Align the desired blade (grass or shrub) with the slot on the tool.
4. Push the blade firmly into place until it clicks, indicating it is securely locked.
5. Verify the blade is securely attached by gently pulling on it.

Image: Diagram illustrating the dimensions of both the grass and shrub blades, and a close-up showing the easy and safe blade change mechanism with the blade release button.

Stiùireadh Obrachaidh

Always wear appropriate safety gear before operating the shear.

A 'tòiseachadh agus a' stad an inneal

1. Ensure the desired blade is securely installed.
2. Cùm an inneal gu daingeann.
3. To start, press and hold the Safety Lock-off Button with your thumb.
4. While holding the safety button, press the ON/OFF Switch with your index finger. The blades will begin to move.
5. To stop, release the ON/OFF Switch. The blades will stop.

A’ cleachdadh lann gearraidh feòir

The grass shear blade is ideal for trimming grass edges around flowerbeds, pathways, and other areas inaccessible to larger mowers.

• Ensure the grass blade (75mm wide) is installed.
• Hold the tool with the blade parallel to the ground or at a slight angle for precise edging.
• Move the tool slowly and steadily along the grass edge.
• Avoid cutting wet grass, as it can clog the blades and reduce efficiency.

Image: Depicts the two cutting modes: Grass Shear with a maximum cutting width of 75mm, and Hedge Trimmer with a maximum cutting length of 118mm and maximum cutting thickness of 7.8mm.

Using the Shrub Shear Blade

The shrub shear blade is suitable for shaping and trimming small shrubs, hedges, and ornamental plants. It can cut branches up to 7.8mm in diameter.

• Ensure the shrub blade (120mm length) is installed.
• Hold the tool at a comfortable angle for trimming.
• Work in small sections, making smooth, even passes.
• Do not force the blades through thick branches. If resistance is met, reposition the tool or use a different cutting tool for larger branches.

Image: Collage showing the WORKPRO shear being used for various trimming tasks, including shaping small trees, weeding, and trimming potted plants, demonstrating its versatility.

Cumail suas

Nì cumail suas cunbhalach cinnteach à coileanadh as fheàrr agus leudaichidh e beatha an inneil agad.

Glanadh

• Always turn off the tool and remove the blade before cleaning.
• Use a soft brush or cloth to remove debris, sap, and dirt from the blades and housing.
• Do not use abrasive cleaners or solvents, as they can damage the plastic parts.
• Wipe the blades with a lightly oiled cloth to prevent rust.

Cùram lann

• The blades are made of premium 65Mn steel for high hardness and wear resistance.
• Inspect blades regularly for damage or dullness.
• If blades become dull, they can be sharpened by a professional or replaced.
• Store blades in a dry place to prevent corrosion.

Ìomhaigh: Dlùth-shealladh view of the premium 65Mn steel blades, emphasizing their high hardness, wear resistance, sharpness, and long life.

Stòradh

• Stòraich an inneal ann an àite fionnar, tioram, air falbh bho sholas dìreach na grèine agus taiseachd.
• Ensure the battery is partially charged (around 50%) before long-term storage to maintain battery health.
• Cùm a-mach à ruigsinneachd chloinne agus luchd-cleachdaidh gun chead.

Fuasgladh thrioblaidean

Sònrachaidhean

Image: Visual representation of the upgraded power motor (1100rpm) and the long-lasting 2000mAh Lithium-ion battery, indicating over 40 minutes of no-load operation time.

Barantas agus Taic

Airson fiosrachadh barantais no taic theicnigeach, cuir fios chun neach-dèanamh no an àite far an do cheannaich thu e. Cùm do chuidhteas ceannach mar dhearbhadh ceannach.

Dèanadair: Hang Zhou Great Star Industrial Co., LTD

For further assistance, visit the WORKPRO official weblàrach-lìn no cuir fios chun t-seirbheis teachdaiche aca.