JEYI I9-Seal

Leabhar-làimhe Cleachdaiche Cèis SSD M.2 NVMe JEYI I9-Seal

Model: I9-Seal

Ro-ràdh

This manual provides comprehensive instructions for the installation, operation, and maintenance of your JEYI I9-Seal M.2 NVMe SSD Enclosure. This device converts an NVMe M.2 solid-state drive into a portable external storage solution with high-speed USB 3.2 Gen 2 connectivity.

Susbaint pacaid

Dèan cinnteach gu bheil na nithean gu lèir a tha air an liostadh gu h-ìosal air an toirt a-steach don phacaid agad:

JEYI M.2 NVMe SSD Enclosure
Pads Teirmeach
Sgrobhadair
USB-A to USB-C Cable (10Gbps)
Càball USB-C gu USB-C (10Gbps)
Lannard

JEYI I9-Seal M.2 NVMe SSD Enclosure package contents — Image: Contents of the JEYI I9-Seal M.2 NVMe SSD Enclosure package, showing the enclosure, two cables, thermal pads, a screwdriver, and a lanyard.

Stiùiridhean rèiteachaidh

Follow these steps to install your NVMe M.2 SSD into the JEYI I9-Seal enclosure:

Ullaich an Còmhdach: Gently slide open the enclosure to reveal the internal PCB.
Cuir Pada Teirmeach an sàs: Peel off the protective films from both sides of a thermal pad and carefully place it onto the NVMe SSD chip area. This aids in heat dissipation.
Insert NVMe SSD: Align your NVMe M.2 SSD (2280 form factor only) with the M-Key slot on the PCB. Insert the SSD firmly but gently into the slot at an angle.
Dèan cinnteach gu bheil an SSD tèarainte: Once inserted, gently push down the SSD and secure it with the provided screw using the included screwdriver. Ensure the SSD is flat and securely fastened.
Dùin an Còmhdach: Carefully slide the enclosure cover back into place until it clicks securely.

Spreadh view of JEYI I9-Seal M.2 NVMe SSD Enclosure showing internal components and thermal pad placement — Image: An exploded diagram illustrating the internal structure of the enclosure, including the aluminum alloy case, heat dissipation shell, thermal pad, and screw, demonstrating how to assemble the SSD within the enclosure.

Diagram showing compatibility with M.2 2280 NVMe SSDs only — Image: A visual guide indicating that the enclosure is compatible exclusively with M.2 2280 NVMe SSDs, with other sizes (2230, 2242, 2260) marked as incompatible.

Stiùireadh Obrachaidh

Once your NVMe SSD is securely installed, connect the enclosure to your device:

Ceangail ris an inneal: Use either the provided USB-C to USB-C cable or the USB-A to USB-C cable to connect the enclosure to a compatible USB port on your computer, smartphone, tablet, or game console.
Comharra cumhachd: A small LED indicator on the enclosure will illuminate, signifying that the device is powered on and connected.
Disk Recognition: Your operating system (Windows, macOS, Linux, Android, iOS) should automatically detect the new storage device. If it's a new SSD, you may need to initialize and format it through Disk Management (Windows) or Disk Utility (macOS) before use.
Gluasad dàta: You can now perform data backup, file transfers, disk upgrades, data recovery, or use it for storage expansion. The enclosure supports USB 3.2 Gen 2 speeds up to 10Gbps.

JEYI I9-Seal M.2 NVMe SSD Enclosure connected to various devices like laptop, smartphone, and tablet — Image: The JEYI I9-Seal enclosure connected to a laptop, smartphone, and tablet, demonstrating its wide compatibility with Windows, Linux, and Mac OS 8.0 and above systems, including Thunderbolt compatibility.

Comparison of USB data transfer speeds, highlighting 10Gbps for USB 3.2 Gen 2 — Image: A graphic illustrating data transfer speeds, showing USB 2.0 at 480Mbps, USB 3.0 (USB 3.2 Gen 1) at 5Gbps, and USB 3.1 (USB 3.2 Gen 2) at 10Gbps, emphasizing the enclosure's high-speed capability for NVMe drives.

Cumail suas

To ensure optimal performance and longevity of your JEYI I9-Seal enclosure:

Riaghladh teas: An alùmanum casing and thermal pads are designed for efficient heat dissipation. During prolonged high-speed data transfers, the enclosure may become warm to the touch. This is normal and indicates effective heat transfer from the SSD.
Glanadh: Cleachd clò bog, tioram gus taobh a-muigh a’ chèis a ghlanadh. Seachain innealan-glanaidh leaghaidh no fuasglaidhean a chleachdadh.
Stòradh: Nuair nach eilear ga chleachdadh, stòraich an cèidse ann an àite fionnar, tioram air falbh bho sholas dìreach na grèine agus teòthachd anabarrach.
Cùram càball: Handle the USB cables carefully. Avoid sharp bends or excessive pulling to prevent damage.

Fuasgladh thrioblaidean

Trioblaid	Adhbhar a dh’fhaodadh a bhith ann	Fuasgladh
Cha deach an còmhdach a lorg leis a’ choimpiutair.	Ceangal càball sgaoilte. SSD nach eil air a stàladh gu ceart. Cha deach an SSD a thòiseachadh/a chruth-atharrachadh. Port no càball USB lochtach.	Dèan cinnteach gu bheil càbaill ceangailte gu tèarainte. Re-open enclosure and verify SSD is seated correctly and screwed in. Check Disk Management (Windows) or Disk Utility (macOS) to initialize and format the SSD. Feuch port USB no càball eile.
Astaran gluasad dàta slaodach.	Ceangailte ri port USB nas slaodaiche (m.e., USB 2.0). Thermal throttling due to high temperature. SSD performance limitations.	Connect to a USB 3.2 Gen 2 (10Gbps) compatible port. Ensure thermal pads are correctly installed. Allow the enclosure to cool if it becomes excessively hot. Verify your NVMe SSD's rated speed.
Enclosure gets very hot.	Normal operation during heavy data transfer. Ineffective thermal pad contact.	This is expected as the aluminum casing dissipates heat. Ensure thermal pads are correctly positioned and making good contact with the SSD and enclosure.

Sònrachaidhean

Feart	Mion-fhiosrachadh
Modail	I9-Seal
Brand	JEYI
Eadar-aghaidh bathar-cruaidh	USB 3.2 Gen 2 (USB-C)
Ìre gluasad dàta	Suas gu 10 Gbps
Compatible SSD Type	NVMe M.2 (PCI-E M-Key)
Supported SSD Form Factor	2280 (80mm) only
Comas stòraidh as àirde	4 TB
Chipset	JMS583 A3
Feartan	UASP Support, TRIM Support, Win to Go (WTG) Support
Stuth	Alloy Aluminium
Dath	Airgiod
Meudan toraidh	4.06 x 1.02 x 0.39 òirleach (103 x 26 x 10 mm)
Cuideam nì	0.317 unnsa (9 gram)
Siostaman-obrachaidh co-fhreagarrach	Windows, macOS, Linux, iOS, Android

Diagram of the JMS583 A3 master chip — Image: A detailed illustration of the JMS583 A3 master chip, which is integrated into the enclosure for stable and high-speed data transmission up to 10Gbps.

Barantas agus Taic

For warranty information or technical support, please refer to the official JEYI website or contact their customer service directly. Details regarding specific warranty periods and support channels are typically provided with your purchase documentation or on the manufacturer's weblàrach.

Dèanadair: JEYI

Weblàrach: Visit the JEYI Store on Amazon