BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light

Ro-ràdh

This manual provides detailed instructions for the safe installation, operation, and maintenance of your BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.

Feartan toraidh

• Braitear Gluasad Amalaichte: Built-in PIR infrared motion detector with a 120° detection angle and a range of 10ft (semidiameter).
• Adjustable Hold Time: Selectable light-on duration of 30 seconds, 120 seconds, or 180 seconds after motion detection.
• Trì Modhan Obrachaidh:
  • Modh AUTO: Light activates when motion is detected in dark conditions.
  • AIR modh: Light remains constantly on.
  • Modh G: Light activates when motion is detected in both daytime and nighttime conditions.
• Trì teòthachd dath: Selectable color temperatures of 3000K (Warm White), 4000K (Neutral White), and 5000K (Cool White) via a toggle switch before installation.
• Dealbhadh ultra-tana: Ìosal-profile design with a diameter of 8.7 inches and a thickness of 0.99 inches, suitable for various spaces.
• Stàladh ioma-chruthach: Can be installed as a flush mount on ceilings or walls.

Figure 1: Illustration of the three operating modes (AUTO, ON, G) and their activation conditions.

Figure 2: Detail of the color temperature toggle switch and motion sensor on the light fixture.

Susbaint pacaid

Dèan cinnteach gu bheil na pàirtean uile an làthair mus tòisich an stàladh:

• 1x Corded Motion Activated Ceiling Light
• 1x Mounting Hardware Package (screws, wire nuts, plastic bracket)
• 1x Leabhar-stiùiridh (an sgrìobhainn seo)

Figure 3: Contents of the BLNAN Motion Sensor LED Ceiling Light package.

Fiosrachadh Sàbhailteachd

RABHADH: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about electrical wiring. Always follow local electrical codes.

• Ensure the power supply is OFF before handling any wiring.
• This fixture is designed for 120V AC power supply.
• Na feuch ri an uidheamachadh atharrachadh.
• Cùm clann air falbh bhon àite stàlaidh.

Stàladh & Stàladh

Lean na ceumannan seo airson an stàladh ceart:

1. Dèan ullachadh airson an stàladh:
   • Cuir dheth an cumhachd aig a’ bhriseadair cuairte mus tòisich thu.
   • Before mounting, select your desired color temperature (3000K, 4000K, or 5000K) using the toggle switch located on the back of the fixture.
2. Stàlaich Bracket Sreap:
   • Rotate and remove the plastic mounting bracket from the light fixture.
   • Attach the plastic bracket to your existing junction box using the provided screws. The bracket is designed for junction boxes with 2.75"-3.7" apart screw holes.
3. Ceanglaichean uèir:
   • Connect the wires from the light fixture to your household wiring: Black to Black (Live), White to White (Neutral), and Green to Green/Bare Copper (Ground). Secure connections with wire nuts.
   • Use the hanging rope to temporarily support the fixture during wiring.
4. Stàlaich an inneal solais:
   • Thoir gu faiceallach a h-uile uèir a-steach don bhogsa snaim.
   • Align the light fixture with the installed mounting bracket and rotate it clockwise until it locks securely into place.
5. Thoir air ais cumhachd: Tionndaidh an cumhachd air ais aig an inneal brisidh cuairteachaidh.

Figear 4: Stiùireadh lèirsinneach airson a’ phròiseis stàlaidh.

Stiùireadh Obrachaidh

The light fixture features adjustable settings for operating mode and hold time. These settings are controlled by small switches located near the motion sensor on the fixture's surface.

1. A 'taghadh modh obrachaidh:
   • Locate the mode switch (labeled AUTO, ON, G).
   • Slide the switch to your desired mode:
   • AUTO: Motion and light sensor activated. Light turns on only when motion is detected in dark conditions.
   • AIR: Light remains continuously on, regardless of motion or ambient light.
   • G: Motion sensor activated. Light turns on when motion is detected, both during the day and at night.
2. Adjusting Hold Time:
   • Locate the hold time switch (labeled 30S, 120S, 180S).
   • Slide the switch to set how long the light remains on after motion is no longer detected:
   • 30S: 30 diog
   • 120S: 120 diog (2 mionaidean)
   • 180S: 180 diog (3 mionaidean)

Figure 5: Switches for adjusting hold time and operating modes.

Cumail suas

Regular maintenance ensures optimal performance and longevity of your LED ceiling light.

• Glanadh: Turn off power before cleaning. Use a soft, dry cloth to wipe the fixture. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• Fad-beatha LED: The integrated LED light source has an average lifespan of 30,000 hours and is not user-replaceable.
• Sgrùdadh: Thoir sùil bho àm gu àm air an inneal-gleidhidh airson comharran milleadh no ceanglaichean sgaoilte. Ma lorgar duilgheadasan sam bith, dì-cheangail an cumhachd agus bruidhinn ri dealanach teisteanasach.

Fuasgladh thrioblaidean

Ma thachras tu ri duilgheadasan leis an inneal solais agad, thoir sùil air na duilgheadasan agus na fuasglaidhean cumanta a leanas:

Sònrachaidhean

Barantas agus Taic

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BLNAN weblàrach. Cùm do chuidhteas ceannach mar dhearbhadh ceannach.