AUTDER 21V 2000mAh Lithium-ion Rechargeable Battery User Manual

1. Ro-ràdh

Thank you for choosing the AUTDER 21V 2000mAh Lithium-ion Rechargeable Battery. This battery is designed to provide reliable power for your compatible AUTDER 21V tools, specifically the AD380 21V Tire Inflator and AUTDER 21V Chainsaw. This manual provides essential information for the safe and efficient use, maintenance, and storage of your battery.

Image 1.1: The AUTDER 21V 2000mAh Lithium-ion Rechargeable Battery. This image displays the battery unit with its branding, voltage, and capacity markings, along with a charging port.

2. Stiùireadh Sàbhailteachd Cudromach

Read all safety warnings and instructions before using the battery. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• A' cur cosgais: Only use the AUTDER 21V compatible charger to charge this battery. Using an incompatible charger may cause fire or damage to the battery.
• Teòthachd: Do not charge or store the battery in temperatures below 0°C (32°F) or above 45°C (113°F). Avoid direct sunlight and extreme heat.
• Milleadh: Do not use a damaged or modified battery. Damaged batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
• Taisbeanadh uisge: Do not expose the battery to water or rain. Water entering a battery may increase the risk of electric shock or fire.
• Cuairt ghoirid: Do not short-circuit the battery terminals. Keep the battery away from metal objects that could make a connection between the terminals.
• Fuasgladh: Dispose of batteries properly according to local regulations. Do not dispose of batteries in household waste or by incineration.
• Clann: Cùm am bataraidh a-mach à ruigsinneachd chloinne.

3. Pasgan-susbaint

Dèan cinnteach gu bheil a h-uile nì an làthair nuair a dh’fhosglas tu am pasgan:

• 1 x AUTDER 21V 2000mAh Lithium-ion Rechargeable Battery (Model NC2030AM-UK)

Note: The compatible charger and tools are sold separately.

4. Suidhich

4.1 A’ cur cosgais air a’ bhataraidh

1. Connect the AUTDER 21V compatible charger to a standard power outlet.
2. Align the battery with the charger and slide it into place until it clicks securely.
3. Observe the charging indicator lights on the battery or charger. Typically, a red light indicates charging, and a green light indicates a full charge.
4. Once fully charged, disconnect the battery from the charger and unplug the charger from the power outlet.

A 'chiad chleachdadh: It is recommended to fully charge the battery before its first use to ensure optimal performance and battery life.

4.2 A’ cur a’ bhataraidh a-steach do inneal

1. Ensure the tool is turned off before installing or removing the battery.
2. Align the battery with the battery slot on your compatible AUTDER 21V tool (e.g., AD380 Tire Inflator or 21V Chainsaw).
3. Slide the battery into the slot until it clicks firmly into place. Ensure it is fully seated and does not wobble.
4. To remove the battery, press the release button (if present) and slide the battery out of the tool.

Ìomhaigh 4.1: Fear eile view of the AUTDER 21V 2000mAh Lithium-ion Rechargeable Battery. This image highlights the battery's design and the charging indicator lights, which are crucial for understanding its status.

5. Stiùireadh Obrachaidh

Once the battery is fully charged and securely installed in your compatible AUTDER 21V tool, you can begin operation.

5.1 Using with AUTDER AD380 Tire Inflator

1. Ensure the battery is fully charged and properly installed in the AD380 tire inflator.
2. Connect the inflator hose to the tire valve.
3. Set the desired pressure on the inflator's display.
4. Press the power button on the inflator to start inflation. The battery will provide power until the set pressure is reached or the inflator is turned off.
5. Monitor the battery level indicator on the battery or tool during extended use.

5.2 Using with AUTDER 21V Chainsaw

1. Ensure the battery is fully charged and properly installed in the 21V chainsaw.
2. Follow the chainsaw's specific operating instructions for starting, cutting, and safety.
3. The battery provides consistent power for cutting tasks.
4. Always check the battery level before starting a task to avoid interruptions.

6. Cumail suas agus stòradh

6.1 Stiùiridhean Cosgais

• Do not overcharge the battery. Disconnect it once fully charged.
• Avoid completely draining the battery before recharging, as this can reduce its lifespan. Recharge when the power is low.
• Allow the battery to cool down before charging if it has been used extensively.

6.2 Molaidhean Stòraidh

• Stòraich am bataraidh ann an àite fionnar, tioram, air falbh bho sholas dìreach na grèine agus teòthachd anabarrach.
• Airson stòradh fad-ùine, cuir cosgais air a’ bhataraidh gu timcheall air 50-60% de chomas.
• Thoir am bataraidh a-mach às an inneal nuair nach eilear ga chleachdadh airson ùine mhòr.

6.3 Glanadh

• Use a clean, dry cloth to wipe the battery casing and terminals.
• Na cleachd solventan no innealan-glanaidh sgudail.
• Ensure terminals are free from dirt and debris for optimal connection.

7. A ’dèanamh trioblaid

8. Sònrachaidhean Teicnigeach

9. Barantas agus Taic Luchd-ceannach

AUTDER products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your original purchase or visit the official AUTDER weblàrach.

If you encounter any issues or have questions about your AUTDER 21V 2000mAh Lithium-ion Rechargeable Battery, please contact AUTDER customer support through the contact information provided on our official website or your purchase platform. Please have your model number (NC2030AM-UK) and purchase details ready when contacting support.