1. Ro-ràdh
The CAD Audio WX50 is a digital frequency agile single-channel UHF handheld wireless system designed for clear vocal pickup and reliable performance. This system offers plug-and-play simplicity with its QuickMic receiver, which connects directly into a mixer or amplifier's 1/4-inch jack. The handheld transmitter features a CADLive-style capsule for professional vocal clarity and includes built-in mute and battery indicators.
This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your WX50 wireless system.
Image 1: CAD Audio WX50 Handheld Wireless Microphone and QuickMic Receiver.
2. Pasgan-susbaint
Mus tèid thu air adhart leis an t-suidheachadh, dèan cinnteach gu bheil na pàirtean uile an làthair:
- WX50 Handheld Transmitter (Microphone)
- QuickMic Receiver
- 1/4-inch to 1/8-inch Gold Adapter
- Power Cord (for receiver charging)
- No-slip Ring
- Filter pop
- 1 Lithium Ion Battery (included, typically pre-installed in transmitter)
3. Stiùireadh Stèidheachaidh
3.1 A’ cur cosgais air an ghlacadair
- Locate the DC 5V Charging Port on the QuickMic Receiver.
- Connect the provided power cord to the charging port and a suitable USB power source (not included).
- The Charge Indicator LED will illuminate red while charging and turn green when fully charged.
3.2 A’ cur bataraidhean a-steach don inneal-sgaoilidh
- Unscrew the bottom cap of the handheld transmitter to access the battery compartment.
- Cuir a-steach am bataraidh Lithium-ion a tha air a ghabhail a-steach, a’ dèanamh cinnteach gu bheil am polarachd cheart (+/-).
- Sgriub am mullach ìosal air ais air an inneal-sgaoilidh gu tèarainte.
3.3 A’ ceangal an glacadair
- Plug the QuickMic Receiver directly into a 1/4-inch input jack on your mixer, amplifier, or PA system. If your input is 1/8-inch, use the provided 1/4-inch to 1/8-inch gold adapter.
- Ensure the receiver is securely seated in the input.
3.4 Powering On and Frequency Selection
- Press and hold the On/Off Switch on the QuickMic Receiver to power it on. The RF Indicator will light up.
- Press and hold the On/Off Switch on the handheld transmitter to power it on. The Frequency Display will illuminate.
- The system will automatically pair. If pairing does not occur, or if you experience interference, press the Frequency Selection Button on the handheld transmitter to cycle through available frequencies until a clear channel is found. The RF Indicator on the receiver will show red for Channel A and green for Channel B.
Image 2: Labeled diagram of the WX50 Handheld Transmitter and QuickMic Receiver components.
4. Stiùireadh Obrachaidh
4.1 A’ cleachdadh a’ mhaicreafòin
- Once powered on and paired, the microphone is ready for use.
- Speak directly into the top grille of the microphone for optimal sound pickup.
- Use the On/Off Mute Switch on the handheld transmitter to temporarily mute the microphone output without powering it down.
4.2 Monitoring Battery Life
- The handheld transmitter features a Low-Battery LED Indicator. This indicator will illuminate when the battery level is low, signaling that the battery needs to be charged or replaced soon.
- The QuickMic Receiver also has a Low Battery Indicator (red = needs charged, blue = on).
4.3 Raon gun uèir
The WX50 system offers a wireless range of approximately 50 meters (164 feet) under optimal conditions. Factors such as obstacles, other wireless devices, and environmental interference can affect the actual operating range.
Image 3: Key features of the CAD Audio WX50 system, including Frequency Agile Design, Low Battery Indicator, and 50m Wireless Range.
5. Cumail suas
5.1 Cùram Bataraidh
- Recharge the receiver's battery when the charge indicator shows low.
- For the handheld transmitter, replace or recharge the Lithium Ion battery when the low-battery indicator activates.
- If storing the unit for an extended period, remove batteries from the transmitter to prevent leakage.
5.2 Glanadh
- Wipe the microphone and receiver surfaces with a soft, dry cloth.
- Na cleachd ceimigean cruaidh, fuasglaidhean, no innealan-glanaidh sgrìobach.
- Periodically clean the pop filter and microphone grille to maintain audio quality.
5.3 Stòradh
Store the WX50 system in a cool, dry place away from direct sunlight and extreme temperatures. Protect the components from dust and physical damage.
6. A ’dèanamh trioblaid
If you encounter issues with your CAD Audio WX50 system, refer to the following common problems and solutions:
| Trioblaid | Adhbhar a dh’fhaodadh a bhith ann | Fuasgladh |
|---|---|---|
| Gun fhuaim no claisneachd bho àm gu àm | Low battery in transmitter or receiver; Interference; Microphone muted; Receiver not properly connected; Transmitter and receiver not paired. | Charge/replace batteries. Change frequency on transmitter. Unmute microphone. Ensure receiver is fully inserted into input. Re-pair transmitter and receiver. |
| Fuaim air a mhilleadh | Input level too high; Interference; Microphone too close to sound source. | Adjust input gain on mixer/amplifier. Change frequency. Maintain appropriate distance from sound source. |
| Raon goirid gun uèir | Obstacles blocking signal; Environmental interference; Low battery. | Ensure clear line of sight between transmitter and receiver. Change frequency. Charge/replace batteries. |
| Chan eil an glacadair a’ cur cumhachd air | Receiver battery depleted; Faulty power cord. | Charge receiver battery. Try a different power cord or USB power source. |
7. Sònrachaidhean
Detailed technical specifications for the CAD Audio WX50 system:
- Ainm a' mhodail: WX50
- Teicneòlas ceangail: Cuideach
- Seòrsa ceangail: 6.35 mm Jack (1/4 inch TRS)
- Dath: Dubh
- Pàtran Polar: Aon-stiùiridh
- Factar foirm microfòn: Siostam microfòn
- Stòr cumhachd: Bataraidh le cumhachd (bataraidh 1 Lithium Ion air a thoirt a-steach)
- Co-mheas Signal-to-Noise: 70 dB
- Àireamh de shianalan: 16
- Fuaim ri chluinntinn: 70 Deicibeil
- stuth dùnaidh: Plastaig
- Freagairt tricead: 20Hz - 16kHz
- Mion-atharrachadh: High Definition Digital QPSK
- Cumhachd tar-chuir: 10mW
- Cugallachd: -43dBV (6.8mV) @ 1Pa
- Còmhlan tricead: 500MHz - 599MHz
- Beatha bataraidh: > 8 uair a thìde
- Meudan: 11" x 3.94" x 2.44" (28cm x 10cm x 6.2cm)
- Cuideam nì: 12 unnsa (0.34 kg)
Dealbh 4: Thairisview of CAD Audio WX50 technical specifications.
Image 5: Information on WX50 battery life, dimensions, and weight.
8. Fiosrachadh Barantais
The CAD Audio WX50 Digital Frequency Agile Single Channel UHF Handheld Wireless System is covered by a Barantas an neach-dèanamh 2-bliadhna. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, or to initiate a warranty claim, please refer to the official CAD Audio weblàrach-lìn no cuir fios chun taic teachdaiche aca.
9. Taic
For further assistance, technical support, or inquiries regarding your CAD Audio WX50 system, please visit the official CAD Audio weblàrach-lìn no cuir fios chun roinn seirbheis teachdaiche aca. Mar as trice gheibhear fiosrachadh conaltraidh air làrach-lìn an neach-dèanamh weblàrach no pacaigeadh toraidh.