SUNLU SLUS-FD-S2-BK-US-NEW
SUNLU Official Filament Dryer S2 User Manual
Model: SLUS-FD-S2-BK-US-NEW
Ro-ràdh
The SUNLU Filament Dryer S2 is an essential accessory for FDM 3D printers, designed to significantly improve 3D printing results by removing excess moisture from filaments. Filaments, especially when stored in humid environments or for extended periods, absorb moisture from the air. This moisture can lead to various printing issues such as clogging, stringing, brittleness, cracking, bubbling, poor adhesion, and layer shifts.
This filament dryer effectively removes moisture, restoring damp filaments to optimal condition. It can also function as a filament spool holder, allowing for continuous drying during the printing process, which is particularly beneficial in humid conditions.
Figure 1: Common 3D printing issues caused by moisture in filament.
Fiosrachadh Sàbhailteachd
- Ensure the device is placed on a stable, flat, and heat-resistant surface.
- Do not block the ventilation holes during operation.
- Cùm an inneal air falbh bho uisge no lioftaichean eile.
- Do not touch the heating elements directly when the device is in operation or immediately after use, as they can be hot.
- Tarraing am pluga den inneal bhon t-socaid cumhachd nuair nach eilear ga chleachdadh no mus glan thu e.
- Cùm a-mach à ruigsinneachd clann is peataichean.
- Cleachd dìreach an adapter cumhachd a chaidh a thoirt seachad.
Bathar seachadview
The SUNLU Filament Dryer S2 features a user-friendly design with a large touch screen for easy operation. It incorporates 360° surround heating for efficient and even drying of filament.
Figure 2: Key features and components of the SUNLU Filament Dryer S2.
Co-phàirtean:
- Filament Dryer Unit: The main device for drying filament.
- Adaptor Cumhachd: For connecting the dryer to a power source.
- Leabhar-làimhe cleachdaiche: An stiùireadh stiùiridh seo.
Figure 3: Packaging contents of the SUNLU Filament Dryer S2.
Suidhich
- Unpack an inneal: Carefully remove the filament dryer and all accessories from the packaging.
- Place the Dryer: Position the dryer on a stable, flat surface near your 3D printer if you intend to print directly from it.
- Insert Filament Spool: Open the lid and place your filament spool inside the dryer. Ensure the filament unwinds smoothly.
- Route Filament (if printing directly): Locate the filament outlet hole on the dryer. Pull the filament through this hole. This allows the filament to be fed directly to your 3D printer while drying.
- Ceangal cumhachd: Find the power connector on the device and plug in the provided power adapter. Then, plug the adapter into a suitable power outlet.
Figure 4: Setup and basic operation steps.
Stiùireadh Obrachaidh
A' tionndadh air/dheth:
- To turn on the dryer, double-click the power button on the touch screen.
- To turn off the dryer, double-click the power button again.
A’ suidheachadh teòthachd agus ùine:
The dryer allows customization of drying temperature and time to suit different filament types.
- Raon Teòthachd: 35 ° C gu 70 ° C.
- Raon-tìm: 0 gu 99 uairean a thìde.
- Use the "SET" button to navigate through the settings menu.
- Use the up and down arrow buttons to adjust values for temperature and time.
- The large LCD touch screen provides real-time display of present value (PV), setting value (SV), remaining time, and material type.
Co-fhreagarrachd filament:
The SUNLU Filament Dryer S2 is compatible with a wide range of 3D printer filaments, including but not limited to:
- PLA / PLA+
- COILLE
- PETG
- ABS / ABS+
- PVB
- HIPS
- neilon
- ASA
- TPU
- PMMA
- PA/PC
It supports filament diameters of 1.75mm, 2.85mm, and 3.00mm.
Figure 5: Filament compatibility and recommended drying settings.
Cumail suas
- Glanadh: Before cleaning, ensure the device is unplugged and completely cooled down. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
- Stòradh: When not in use for extended periods, store the dryer in a cool, dry place, away from direct sunlight and excessive humidity.
- Sgrùdadh cunbhalach: Periodically check the power cord for any damage. Ensure the filament path is clear of debris.
Fuasgladh thrioblaidean
| Trioblaid | Adhbhar a dh’fhaodadh a bhith ann | Fuasgladh |
|---|---|---|
| Chan eil cumhachd aig an inneal. | Chan eil an inneal-atharrachaidh cumhachd ceangailte gu ceart; duilgheadas leis an t-socaid cumhachd. | Ensure power adapter is securely plugged into the device and a working power outlet. Double-check the power button operation (double-click to turn on). |
| Filament still damp an dèidh tiormachadh. | Incorrect temperature/time settings; extremely damp filament. | Increase drying time or temperature according to filament type (refer to Figure 5). For very damp filament, multiple drying cycles may be needed. Ensure the lid is properly closed. |
| Device tips over when feeding filament. | Unstable placement; excessive tension on filament. | Ensure the dryer is on a stable, level surface. Minimize tension on the filament being pulled from the dryer. Consider placing the dryer at a lower height relative to the printer. |
| Display not showing correct humidity. | Sensor calibration; environmental factors. | The built-in hygrometer provides an indication. For precise measurements, an external hygrometer may be used. Continue drying based on recommended times for filament type. |
Sònrachaidhean
- Meudan toraidh: 10.43 x 10.79 x 4.65 òirleach
- Cuideam nì: 3.42 Punnd
- Àireamh Modail: SLUS-FD-S2-BK-US-NEW
- Dèanadair: SUNLU
- Teòthachd obrach as àirde: 70°C
- Dry Time Adjustable Range: 1-99 uairean
- Dry Temperature Adjustable Range: 35-70 ° C
- Sònrachadh a-steach: AC 100V-240V, 50 / 60HZ
- Max Working Electricity: 1.8A
- Max Working Power: 48W
- Meud sgrion LCD: 4.6-òirlich
- Co-fhreagarrachd filament: 1.75mm, 2.85mm, 3.00mm
Barantas agus Taic
For warranty information and technical support, please refer to the official SUNLU website or contact their customer service directly. A digital version of this user manual is available for download:
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.