Leabhar-làimhe Cleachdaiche Fònaichean-cluaise Bluetooth Baidhsagal-motair WGP Teleheer T6 Plus

Ro-ràdh

This manual provides detailed instructions for the installation, operation, and maintenance of your WGP Teleheer T6 Plus Motorcycle Bluetooth Headset. Please read this manual thoroughly before using the device to ensure proper function and safety. The T6 Plus is designed for motorcycle riders, offering full-duplex Bluetooth real-time intercom communication, hands-free calling, music playback, and voice assistant integration.

Prìomh fheartan

• Full Duplex Bluetooth Real-time Intercom: Stable signal transmission up to 1500 meters (93 MPH) with ceramic antenna.
• Hands-free & Multi-function Keys: Bluetooth 5.1 connectivity, supports call handling (answer/refuse/redial), music playback. Automatic switch to phone mode for incoming calls. Large button design for easy operation with gloves.
• IP65 Waterproof & Dustproof Design: Withstands various weather conditions, operational down to -15°F.
• HD Speakers & Ultra High Quality Sound: High-definition sound quality, especially for bass, with effective wind noise reduction.
• All-in-One Type-C Port: Integrated audio, data transfer, and charging.
• Beatha bataraidh fada: 850 mAh battery providing 30 hours of continuous use and 500 hours standby.

Susbaint pacaid

Dèan cinnteach gu bheil a h-uile nì an làthair sa phacaid agad:

• WGP Teleheer T6 Plus Bluetooth Headset Unit (2 units for 2-pack)
• Luchd-labhairt clogaid
• Microphone (boom mic for open-face helmets, soft mic for full-face helmets)
• Mounting Clip (clamp and adhesive options)
• Càball Cìsean USB Type-C
• Leabhar-làimhe cleachdaiche

Image: A detailed diagram illustrating the components of the WGP Teleheer T6 Plus headset, including the main unit with its Type-C port, indicator light, and control buttons (OFF/ON, Volume+, Volume-, Telephone, Connect). It also shows the securing clip, microphone, and trumpet (speakers), providing a clear visual guide to the parts included and their connections.

Stàladh agus stàladh

1. A 'cur cosgais air an inneal

Before first use, fully charge the T6 Plus headset. Connect the provided USB Type-C cable to the headset's Type-C port and the other end to a USB power adapter (not included). The indicator light will show charging status and turn off when fully charged.

• Ùine cosgais: timcheall air 2-3 uairean.
• Indicator light: Red during charging, off when fully charged.

2. Installing the Headset in Your Helmet

The T6 Plus can be installed using either the clamp mount or the adhesive mount.

1. Tagh àite stàlaidh: Select a flat area on the left side of your helmet where the headset unit can be easily accessed.
2. Stàlaich Luchd-labhairt: Attach the speakers inside the helmet's ear pockets using the adhesive pads. Ensure they are positioned directly over your ears for optimal sound quality.
3. Stàlaich am micreofon:
   • For full-face helmets: Use the soft wire microphone and position it inside the chin bar, close to your mouth.
   • For open-face or modular helmets: Use the boom microphone and position it in front of your mouth.
4. Stàlaich am Prìomh Aonad:
   • Clamp Sliabh: Sleamhnachadh an clamp between the helmet shell and the inner padding. Secure it tightly.
   • Sliabh Adhesive: Clean the chosen surface on the helmet. Peel off the protective film from the adhesive mount and firmly press it onto the helmet for at least 30 seconds. Allow 24 hours for the adhesive to cure before use.
5. Ceangail càbaill: Plug the speaker/microphone cable into the Type-C port on the main headset unit.

Image: A WGP Teleheer T6 Plus headset unit mounted on the side of a motorcycle helmet. This image demonstrates the typical installation position of the headset on a helmet, showing its compact design and how it integrates with the helmet's exterior. The control buttons are visible, indicating ease of access for the rider.

Stiùireadh Obrachaidh

1. Cumhachd air / dheth

• Cumhachd air: Brùth agus cùm an Putan Cumhachd for 3 seconds until the indicator light flashes.
• Cumhachd dheth: Brùth agus cùm an Putan Cumhachd for 3 seconds until the indicator light turns off.

2. Paidhir Bluetooth le Fòn-làimhe

1. Ensure the T6 Plus is powered off.
2. Brùth agus cùm an Putan Cumhachd for approximately 5-7 seconds until the indicator light flashes red and blue alternately, indicating pairing mode.
3. On your mobile phone, enable Bluetooth and search for "Teleheer T6 Plus".
4. Select "Teleheer T6 Plus" from the list of available devices to connect. Once connected, the indicator light will flash blue slowly.

3. Intercom Pairing (Two Units)

To establish intercom communication between two T6 Plus units:

1. Ensure both T6 Plus units are powered off.
2. Air Aonad 1, brùth is cum sìos am putan Putan Cumhachd for 5-7 seconds until the indicator light flashes red and blue alternately.
3. Air Aonad 2, brùth is cum sìos am putan Putan Cumhachd for 5-7 seconds until the indicator light flashes red and blue alternately.
4. Brùth goirid air an Putan Cumhachd on either Unit 1 or Unit 2 (one short press). The units will search for each other.
5. Aon uair ‘s gu bheil iad ceangailte, bidh na solais-comharrachaidh air an dà aonad a’ lasadh gu gorm gu slaodach, agus cluinnidh tu tòna dearbhaidh.

Image: A graphic illustrating the effective intercom range of the Teleheer T6 Plus (Bluetooth 5.1) compared to older Bluetooth 4.0 devices. The T6 Plus shows stable connections over 1500m, while older devices show unstable connections over shorter distances. This highlights the improved signal stability and range due to Bluetooth 5.1 and the ceramic antenna.

4. Gnìomhan Gairm Fòn

• Call Freagairt: Brùth goirid air an Putan fòn.
• Call crìochnachaidh: Brùth goirid air an Putan fòn.
• Call diùltadh: Brùth agus cùm an Putan fòn airson 2 diogan.
• Deasaich an àireamh mu dheireadh: Dèan briogadh dùbailte air an Putan fòn.

5. Cluich Ciùil

• Cluich / Stad: Brùth goirid air an Putan fòn.
• An ath cheum: Brùth goirid air an Putan Volume Up.
• Rian roimhe: Brùth goirid air an Putan Down Down.
• Atharrachadh tomhas-lìonaidh: Brùth agus cùm an Putanan Volume Up / Down gus meud a mheudachadh no a lughdachadh.

6. Neach-cuideachaidh Gutha (Siri/Neach-cuideachaidh Google)

• Cuir an gnìomh neach-taic guth: Dèan briogadh dùbailte air an Putan Cumhachd.

Image: A graphic depicting the voice assistant feature of the Teleheer T6 Plus, showing a helmeted rider interacting with their phone via voice commands like "Hey Siri" or "Ok Google". This illustrates the hands-free convenience for navigation, calls, and other smartphone functions while riding.

Cùram agus cumail suas

• Glanadh: Sguab an aonad headset le clò bog, tioramamp aodach. Na cleachd ceimigean cruaidh no innealan-glanaidh sgudail.
• Seasmhachd uisge: The device is IP65 waterproof. While it can withstand water jets, avoid submerging it in water for extended periods. Ensure the Type-C port cover is securely closed when not charging.
• Stòradh: Stòraich an inneal ann an àite fionnar, tioram nuair nach eilear ga chleachdadh. Seachain teòthachd anabarrach.
• Cùram Bataraidh: To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in use for long periods.

Image: A WGP Teleheer T6 Plus headset unit partially submerged in water with splashes, demonstrating its IP65 waterproof rating. The image emphasizes the device's ability to withstand water exposure, making it suitable for various weather conditions during riding.

Fuasgladh thrioblaidean

Sònrachaidhean

Barantas agus Taic

For warranty information and technical support, please refer to the official WGP weblàrach-lìn no cuir fios chun t-seirbheis teachdaiche aca gu dìreach. Cùm do chuidhteas ceannach mar dhearbhadh ceannach airson tagraidhean barantais.

Airson tuilleadh cuideachaidh, faodaidh tu tadhal air an duilleag toraidh air Amazon or contact the seller directly through the Amazon platform.