BOYA BY-M1S Lavalier Microphone User Manual

1. Ro-ràdh

The BOYA BY-M1S is a professional omnidirectional lavalier condenser microphone designed for high-quality audio recording. It is compatible with a wide range of devices, including smartphones, DSLR cameras, camcorders, audio recorders, and personal computers. This manual provides detailed instructions for setting up, operating, and maintaining your BY-M1S microphone.

Figure 1: BOYA BY-M1S Lavalier Microphone

2. Feartan toraidh

Omnidirectional Capsule: Captures broadcast-quality sound from a 360-degree range.
Plug and Play: No batteries or drivers required for most smartphone applications.
Càball fada: Features a 6-meter (20-foot) cable for extended reach.
Co-fhreagarrachd farsaing: Supports smartphones, DSLR cameras, camcorders, audio recorders, tablets, and laptops.
Device Mode Switch: Easily switch between "Smartphone" and "Camera" modes.
Accessories air an toirt a-steach: Comes with a metal clip for secure attachment and a foam windscreen to reduce wind noise.

BOYA BY-M1S Microphone Components — Figure 2: Key components of the BY-M1S microphone, including the omnidirectional mic capsule, camera/smartphone switch, clothing clip, and 3.5mm connector.

3. Pasgan-susbaint

The BOYA BY-M1S package includes the following items:

BY-M1S Lavalier Microphone
Clip Lapel
Uinneag-gaoithe foam
Carrying Pouch (may vary by region)

4. Stiùireadh Stèidheachaidh

4.1 A’ ceangal a’ mhaicreafòin

Attach the metal clip to the microphone body.
Securely clip the microphone to your clothing, approximately 15-20 cm (6-8 inches) from your mouth, for optimal sound capture.
Place the foam windscreen over the microphone capsule to reduce plosives and wind noise.

Lavalier Microphone with Clip — Figear 3: Micreofon le criomag lapel ceangailte.

4.2 A 'ceangal ri innealan

The BY-M1S features a 3.5mm TRRS connector for broad compatibility.

Airson Fònaichean Sgaoilte/Clàran:
Plug the 3.5mm connector directly into your device's headphone/microphone jack. Ensure the switch on the microphone's control module is set to "Smartphone" mode. For iOS devices without a 3.5mm jack, a 3.5mm to Lightning adapter (not included) is required.
For DSLR Cameras/Camcorders/Audio Recorders/PCs:
Plug the 3.5mm connector into the microphone input jack of your device. Set the switch on the microphone's control module to "Camera" mode. For PCs with separate headphone and microphone jacks, you may need a 3.5mm TRRS to TRS adapter (not included).

BOYA BY-M1S Plug and Play — Figure 4: The BY-M1S microphone showing its 3.5mm connector and control module with the Camera/Smartphone switch.

5. Stiùireadh Obrachaidh

5.1 Taghadh Modh

The control module on the microphone cable features a switch to select the appropriate operating mode:

Smartphone Mode: Use this setting when connecting to smartphones, tablets, or other devices that use a TRRS input.
Modh Camara: Use this setting when connecting to DSLR cameras, camcorders, audio recorders, or other devices that use a TRS input.

Always ensure the switch is set to the correct mode for your recording device to prevent audio issues.

5.2 Recording Tips

Suidheachadh microfòn: For clear audio, position the microphone approximately 6-8 inches (15-20 cm) from the sound source.
Àrainneachd: Record in a quiet environment to minimize background noise. The omnidirectional pattern picks up sound from all directions, including ambient noise.
Riaghladh càbaill: Use the included cable tie to manage the extra-long cable and prevent tangles or accidental disconnections.
Sgrùdadh: If your recording device allows, monitor your audio with headphones during recording to ensure optimal sound levels and quality.

6. Cumail suas

Glanadh: Use a soft, dry cloth to clean the microphone body and cable. Do not use liquid cleaners or solvents.
Stòradh: Store the microphone in its carrying pouch when not in use to protect it from dust and physical damage. Avoid extreme temperatures and humidity.
Cùram càball: Do not sharply bend or pull the cable. Coil it loosely for storage.

7. A ’dèanamh trioblaid

Trioblaid	Adhbhar a dh’fhaodadh a bhith ann	Fuasgladh
Gun fhuaim no meud ìosal.	Incorrect mode selected (Smartphone/Camera). Microphone not fully plugged in. Tha fuaim an inneil ro ìosal. Cuir-a-steach ceàrr air a thaghadh air an inneal.	Ensure the switch is set to the correct mode for your device. Firmly plug the 3.5mm connector into the device's audio jack. Increase the recording volume on your device. Select the external microphone as the audio input source in your device settings.
Droch chàileachd claisneachd (m.e., bog, air a shaobhadh).	Microphone too far or too close. Wind noise or plosives. Fuaim àrd sa chùlaibh.	Adjust microphone placement to 6-8 inches from the sound source. Ensure the foam windscreen is properly installed. Clàraich ann an àrainneachd nas sàmhaiche.
Microphone not recognized by iOS device.	Missing Lightning adapter.	An official Apple 3.5mm to Lightning adapter is required for newer iOS devices without a 3.5mm jack.

8. Sònrachaidhean

Sònrachadh	Mion-fhiosrachadh
Pàtran Polar	Omndirectional
Freagairt Tricead	18 kHz
Mothachadh claisneachd	30 Deicibeil
Co-mheas Signal-to-Noise	78 dB
bacadh	1000 Ach
Fad Càball	6 meatair (20 troigh)
Seòrsa ceangail	3.5 mm TRRS Jack
Stòr cumhachd	Battery Powered (no internal battery, powered by device in smartphone mode, or external battery for camera mode if applicable)
Cuideam nì	68 gram
Meudan (L x W x H)	12 x 6 x 15 Centimeters (Product Dimensions)

9. Barantas agus Taic

BOYA provides a barantas aon-bhliadhna for the BY-M1S microphone. This warranty covers manufacturing defects and ensures product quality.

For technical support, warranty claims, or any questions regarding your BOYA BY-M1S microphone, please contact BOYA customer service through their official website or the retailer where the product was purchased. Please have your purchase receipt and product model number (BY-M1S) available when contacting support.

BOYA BY-M1S