slopehill QN8010CE High-Speed Hair Dryer

Stiùireadh sàbhailteachd cudromach

Nuair a bhios tu a’ cleachdadh innealan dealain, gu sònraichte nuair a tha clann an làthair, bu chòir ceumannan sàbhailteachd bunaiteach a leantainn an-còmhnaidh, a’ toirt a-steach na leanas:

• Cunnart: Cùm a-mach à ruigsinn chloinne.
• Cunnart: Na cleachd fhad 'sa tha thu a' nighe.
• Cunnart: Seachain conaltradh le uisge.
• An-còmhnaidh dì-phlug an inneal dìreach às deidh a chleachdadh.
• Na cuir agus na stòraich inneal far am faod e tuiteam no a tharraing a-steach do thuba no sinc.
• Na cuir a-steach no a-steach gu uisge no leaghan eile.
• Ma thuiteas inneal a-steach don uisge, thoir air falbh e sa bhad. Na gabh a-steach don uisge.

This appliance is equipped with an Appliance Leakage Circuit Interrupter (ALCI) safety plug. This device provides protection against electric shock. Test the ALCI plug before each use by pressing the 'TEST' button. If the ALCI trips, press 'RESET' to restore power. If the ALCI fails to reset, discontinue use.

Image: Close-up of the ALCI Safety Plug with 'TEST' and 'RESET' buttons.

Bathar seachadview

The slopehill QN8010CE High-Speed Hair Dryer is designed for efficient and gentle hair drying, featuring advanced technology for professional results.

Prìomh fheartan:

• Enhanced 2000W High-Speed Brushless Motor: Delivers powerful airflow for fast drying with a motor speed of 110,000 RPM.
• Dealbhadh aotrom: Weighs approximately 320g, reducing arm fatigue during use.
• Ìre fuaim ìosal: Operates at ≤75 dB for a quieter drying experience.
• 30 Million High-Concentration Negative Ions: Released to form a moisture protective layer on the hair, effectively fixing moisture and reducing frizz caused by static electricity.
• Intelligent Temperature Control & Overheat Protection: Monitors temperature to prevent heat damage. A blue light flashes and the wind stops automatically if the temperature is too high.
• Teicneòlas Glanadh Fèin-ghluasadach: Simplifies maintenance by blowing out dust from the filter.
• Ceanglaichean magnetach: Includes a diffuser and two concentrator nozzles for versatile styling.
• Corda cumhachd fada: Features a 2.5m (8.2ft) cord for extended reach.

Image: Diagram highlighting key features like lightweight design, powerful motor, IQ Perfectto Technology, ergonomic design, innovative micro-filter, and longer useable lifecycle.

Image: Illustration showing the benefits of 30 million negative ions for hair shine and health.

Image: Diagram illustrating the Over Heat Protection and Intelligent Temperature Control system.

Suidhich

A 'ceangal Nozzles:

1. Select the desired magnetic attachment (diffuser, smoothing nozzle, or concentrator nozzle).
2. Align the attachment with the front of the hair dryer. The magnetic connection will securely snap it into place.
3. The concentrator and smoothing nozzles can be rotated 360° to direct airflow as needed.

Ìomhaigh: Tharview of the hair dryer with its magnetic attachments, including the diffuser and two concentrator nozzles.

Stiùireadh Obrachaidh

Smachdan:

Image: Diagram showing the location of the wind speed control, temperature control, and on/off buttons.

1. Cumhachd air / dheth: Press the power button (bottom button) to turn the hair dryer on or off.
2. A’ gleusadh astar na gaoithe: Press the wind speed button (top button with fan icon) to cycle through 3 wind speeds: Gentle, Medium, Strong. Corresponding LED indicators will light up.
3. Teòthachd rèiteachaidh: Press the temperature button (middle button with thermometer icon) to cycle through 3 heat settings: Low Heat (65°C), Medium Heat (82°C), High Heat (95°C). Corresponding LED indicators will light up.
4. Cold Wind Function: To activate cold wind, long-press the temperature button for 2 seconds. All temperature LEDs will turn off, indicating cold air. Long-press again for 2 seconds to return to heat mode.

Cleachdadh Examples:

Image: A man using a concentrator nozzle for precise styling.

Image: A woman using the diffuser attachment to enhance curls.

Cumail suas

Glanadh fèin-ghluasadach:

The hair dryer features an automatic cleaning function to help maintain optimal performance and extend its lifespan.

1. Ensure the hair dryer is in standby mode (powered off but still plugged in).
2. Long-press the wind speed button (top button with fan icon) for 3 seconds.
3. The hair dryer will activate a reverse airflow cycle for 7-8 seconds to dislodge dust and debris from the filter, then turn off automatically.

Removable Micro Filter:

For thorough cleaning, the micro filter is removable.

1. Gently twist the rear filter cap counter-clockwise to remove it.
2. Carefully remove any accumulated hair or dust from the filter mesh.
3. Reattach the filter cap by twisting it clockwise until secure.

Fuasgladh thrioblaidean

• Gun chumhachd: Ensure the ALCI plug is reset and the power cord is securely plugged into a working outlet. Check for tripped circuit breakers.
• No Heat / Only Cold Air: If the temperature LEDs are off, long-press the temperature button for 2 seconds to switch back to heat mode. If the issue persists, the overheat protection might have activated; allow the device to cool down.
• Sruth-adhair lag: Check the rear micro filter for blockages (hair, dust). Clean the filter using the automatic cleaning function or by manually removing and cleaning it.
• Unusual Noise/Smell: Immediately turn off and unplug the device. Do not use it until inspected by a qualified technician.

Sònrachaidhean

Bhideothan Bathar Oifigeil

Barantas & Taic

For warranty information, technical support, or customer service inquiries, please refer to the contact details provided on the product packaging or visit the official slopehill weblàrach. Cùm do chuidhteas ceannach airson tagraidhean barantais.

You can visit the official slopehill store for more products and support: slopehill Store