AeroCool HEXFORMBKV2 Micro ATX PC Case Instruction Manual

1. Toradh thallview

The AeroCool HEXFORMBKV2 is a high-performance Micro ATX PC case designed for optimal ventilation and a modern aesthetic. It features a tempered glass side panel to showcase your internal components and a stylish front panel that highlights the included FRGB fans. This mini-tower case supports efficient air and liquid cooling solutions.

Prìomh fheartan:

• High-Performance Mini-Tower: Front panel designed for effective cooling, showcasing three fixed RGB fans.
• Expansive Cooling Support: Includes 3 FRGB fans (2 front, 1 rear) and supports liquid cooling at the front and rear.
• Micro ATX Compatibility: Supports Micro-ATX and Mini-ITX motherboards, CPU coolers up to 159 mm, and high-performance graphics cards up to 296 mm (without front radiator).
• Ruigsinneachd ioma-mheadhain: Top panel features 1x USB 3.0 port, 2x USB 2.0 ports, microphone and HD audio jacks, and Reset/Power buttons.

2. Sònrachaidhean

3. Stiùirich rèiteachaidh

Follow these steps to properly install your components into the AeroCool HEXFORMBKV2 PC case.

3.1 A’ dì-phapadh

1. Thoir air falbh cùis a’ PC gu faiceallach bhon phacaid aige.
2. Remove any protective films or internal packaging materials.
3. Cuir a’ chùis air uachdar seasmhach, rèidh.

3.2 Stàladh Motherboard

1. Remove the tempered glass side panel by unscrewing the thumb screws.
2. Install the I/O shield (if not pre-installed on your motherboard) into the rear opening of the case.
3. Align your Micro ATX or Mini-ITX motherboard with the standoffs inside the case.
4. Daingnich am bòrd-màthar le bhith a’ cleachdadh nan sgriothan a tha air an toirt seachad.

3.3 Stàladh Solar Cumhachd

1. Lorg an t-àite stèileachaidh airson an t-solar cumhachd aig bonn cùl a’ chùis.
2. Slide your power supply unit (PSU) into the designated bay.
3. Daingnich an PSU le sgriothan bho chùl a’ chùis.

3.4 Stàladh Draibh Stòraidh

1. Identify the 3.5-inch drive bays within the case.
2. Mount your hard drives or SSDs into the appropriate bays and secure them with screws.

3.5 Expansion Card (GPU) Installation

1. Thoir air falbh na còmhdaichean slot leudachaidh riatanach bho chùl a’ chùis.
2. Insert your graphics card or other expansion cards into the PCIe slots on your motherboard.
3. Ensure the card is seated correctly and secure it with a screw. Note the maximum GPU length of 296 mm (without front radiator).

3.6 Siostam fuarachaidh

The case comes with three pre-installed 120mm FRGB fans (two at the front, one at the rear). Additional fans or liquid cooling radiators can be installed as needed. Ensure proper airflow direction for optimal cooling.

3.7 Stiùireadh Càbaill

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics.

4. Stiùireadh Obrachaidh

4.1 A’ cur cumhachd air/dheth

• To power on your PC, press the Cumhachd button located on the top panel.
• To power off, either shut down through your operating system or press and hold the Cumhachd putan airson beagan dhiog.

4.2 Front Panel I/O Ports

The top panel provides convenient access to various ports:

• Port USB 3.0 (x1): Airson gluasad dàta aig astar àrd.
• Puirt USB 2.0 (x2): Airson innealan-iomaill a cheangal.
• Jack microfòn: Airson cuir a-steach fuaim.
• HD Audio Jack: For audio output (headphones/speakers).
• Putan Ath-shuidheachadh: To restart the system. Note: This button may also cycle through FRGB lighting effects if connected to a compatible controller.

4.3 FRGB Fan Control

The pre-installed FRGB fans offer fixed RGB lighting. If your motherboard supports RGB control, you may be able to synchronize or change lighting effects via motherboard software. Otherwise, the Reset button might cycle through pre-set effects if wired accordingly.

5. Cumail suas

Bidh cumail suas cunbhalach a’ cuideachadh le bhith a’ dèanamh cinnteach à coileanadh agus fad-beatha as fheàrr airson pàirtean do PC.

5.1 Glanadh Criathrag Duslach

• The HEXFORMBKV2 features a mesh front panel and a top panel with a magnetic dust filter.
• Periodically remove and clean these filters to prevent dust buildup, which can hinder airflow and cooling efficiency.
• Use compressed air or a soft brush to remove dust.

5.2 Glanadh Coitcheann

• Sguab taobh a-muigh a’ chùis le clò bog, damp aodach. Seachain luchd-glanaidh sgudail.
• For the tempered glass panel, use a glass cleaner and a microfiber cloth to prevent scratches.

6. A ’dèanamh trioblaid

Ma thachras tu ri duilgheadasan le cùis a’ PC agad, smaoinich air na ceumannan cumanta fuasgladh-cheistean a leanas:

• Gun chumhachd: Ensure all power cables (PSU to wall, PSU to motherboard, PSU to components) are securely connected. Check the power switch on the PSU.
• Luchd-leantainn gun a bhith a’ snìomh/RGB gun a bhith ag obair: Verify that the fan power cables and RGB cables are correctly connected to the motherboard or a fan/RGB controller. Consult your motherboard manual for proper header connections.
• Overheating: Ensure all fans are spinning correctly and are oriented to provide adequate airflow (intake/exhaust). Clean dust filters regularly. Check CPU cooler and GPU temperatures using monitoring software.
• Puirt a’ Phannal Aghaidh nach eil ag Obrachadh: Check that the front panel I/O cables (USB, Audio, Power/Reset) are correctly connected to the corresponding headers on your motherboard.

For more complex issues, consult the manuals for your individual PC components (motherboard, GPU, PSU) or seek professional assistance.

7. Barantas agus Taic

7.1 Fiosrachadh Barantais

The AeroCool HEXFORMBKV2 PC case comes with a Barantas 2-bliadhna for parts. Please retain your proof of purchase for warranty claims.

7.2 Taic Teicnigeach

For technical assistance, product inquiries, or warranty claims, please visit the official AeroCool website or contact their customer support. You can typically find contact information on the manufacturer's weblàrach no ann am pasgan toraidh.

• Oifigeil AeroCool Weblàrach: www.aerocool.io
• Post-d Taic Luchd-cleachdaidh: support@aerocool.io (example, please verify on official weblàrach)