Ro-ràdh
This manual provides instructions for the SUPERNIGHT 24 Keys RGB LED Strip Light Wireless Dimmer Remote Controller. This remote is designed to control compatible RGB LED strip lights, offering various color and mode selections.

Image: Two SUPERNIGHT 24-key RGB LED remote controllers, showing the button layout.
Co-fhreagarrachd
This remote controller is compatible with SMD 5050, 3528, and 2835 RGB LED strip lights. It is designed for use with 4-pin light strips and DC12V power supplies only. It is not compatible with DC24V or AC200 power supplies.
Susbaint pacaid
Tha am pasgan a’ toirt a-steach:
- 2 x 24-key RGB LED light remote controllers
Thoir an aire: This product includes only the remote controllers. LED light strips, adapters, power supplies, or control boxes are not included.
Stiùiridhean rèiteachaidh
- Gnìomhachadh bataraidh: Before first use, locate the plastic insulation tab in the battery compartment of the remote controller. Pull this tab out to activate the pre-installed battery.
- Ceangail Stiall LED: Ensure your LED strip light is a 4-pin RGB type and uses a DC12V power supply. Connect the LED strip to its control box (not included).
- Align Connections: When connecting the LED strip to the adapter or control box, ensure the arrow mark on the adapter aligns precisely with the arrow mark on the LED light strip. Correct connection of positive and negative poles according to color coding is essential for proper function.
- Position Signal Receiver: Ensure the infrared (IR) signal receiver of your LED strip system is unobstructed and visible to the remote controller for optimal operation.

Image: Illustration of removing the battery insulation tab and aligning the arrow marks during LED strip connection.
Stiùireadh Obrachaidh
The 24-key remote controller provides comprehensive control over compatible RGB LED strip lights. Point the remote directly at the LED strip's IR receiver for best performance.
Gnìomhan putan:

Ìomhaigh: Mion-fhiosrachadh view of the 24-key remote controller with labels for each button's function.
- AIR / OFF: Turns the LED strip lights on or off.
- Atharrachadh soilleireachd: Two buttons (sun icons) to increase or decrease the brightness of the lights.
- Taghadh dath: 16 dedicated buttons for static colors (Red, Green, Blue, White, and various shades).
- Modhan fiùghantach:
- Flash: A’ dol tro na dathan gu luath.
- STROBE: A’ lasadh aon dath.
- FADE: A’ gluasad gu rèidh eadar dathan.
- SMACH: Atharrachaidhean dath mean air mhean.
For specific color and mode combinations, refer to the table below:
| Brightness (+ / Speed Up) | Brightness (- / Speed Down) | dheth | On |
|---|---|---|---|
| Dearg statach | Uaine statach | Gorm statach | Geal Statach |
| Orains statach | Uaine pea statach | Static Dorcha Gorm | 7 Color Jumpy Change |
| Buidhe Dorcha Statach | Cyan statach | Brùnach Statach | Bidh iad uile a’ seargadh a-mach is a’ seargadh a-steach |
| Buidhe statach | Solas Static Gorm | Pinc Statach | 7 Atharrachadh fade dath |
| Static Straw Buidhe | Sky Blue Static | Purpaidh statach | 3 Base Color Jumpy |

Image: A hand holding the remote controller, adjusting the color of LED strip lights installed behind a television.
Cumail suas
The remote controller requires minimal maintenance. Keep the device dry and clean. If the remote's performance degrades, replace the internal Lithium Ion battery. Ensure the battery is inserted with correct polarity.
Fuasgladh thrioblaidean
- Iomallach nach eil a’ freagairt:
- Ensure the plastic insulation tab has been removed from the battery compartment.
- Verify the remote is pointed directly at the LED strip's IR signal receiver.
- Thoir sùil airson bacadh sam bith eadar an smachd iomallach agus an glacadair.
- Replace the battery if the remote still does not function.
- Incorrect Color/Mode Display:
- Confirm that the adapter arrow mark is aligned with the arrow mark on the light strip.
- Ensure lead wires are connected correctly according to color coding (positive and negative poles).
- No Power to LED Strip:
- Verify that the power supply is DC12V. This product is not compatible with DC24V or AC200.
- Confirm that the LED strip is a 4-pin type.
If issues persist after following these steps, please contact customer service for further assistance.
Sònrachaidhean
- Meudan toraidh: 3.22 x 1.92 x 0.62 òirleach
- Cuideam nì: 1.13 unnsa
- Àireamh Modail nì: a05ad1f0-439e-460e-bab9-927232c68c22
- Bataraidhean: 1 Bataraidh Lithium Ion a dhìth (air a ghabhail a-steach)
- Brand: SUPERNIGHT
- Feart sònraichte: Co-fhreagarrach
- Dath: Ioma
- An àireamh as motha de dh’ innealan le taic: 1
- Innealan co-fhreagarrach: RGB LED Strip Light (SMD 5050, 3528, 2835, 4-pin, DC12V)
Barantas agus Taic
This product comes with a one-year warranty. During this period, replacement or repair will be provided free of charge, excluding damage caused by artificial situations or overload working conditions.
For any questions or assistance, please contact our customer service. We provide 24-hour customer service and support free returns and exchanges.