THOMSON TT700

THOMSON TT700 Premium Turntable User Manual

1. Ro-ràdh

Tapadh leibh airson ceannachasing the THOMSON TT700 Premium Turntable. This manual provides essential information for the proper setup, operation, and maintenance of your new turntable. Please read this manual thoroughly before use and retain it for future reference.

The TT700 is designed to deliver a high-quality vinyl listening experience, featuring a belt-drive system, an AT91 Audio Technica cartridge, adjustable counterweight, and antiskating control.

2. Fiosrachadh Sàbhailteachd Cudromach

  • Stòr cumhachd: Ensure the turntable is connected to a 230V AC power supply.
  • Suidheachadh: Cuir an clàr-tionndaidh air uachdar seasmhach, rèidh air falbh bho sholas dìreach na grèine, stòran teas, agus cus duslach no crith.
  • Taiseachd: Do not expose the unit to rain, moisture, or liquids.
  • Fionnarachadh: Na cuir bacadh air fosglaidhean fionnarachaidh.
  • Glanadh: Dì-cheangail an cumhachd mus glan thu e. Cleachd clò bog, tioram. Seachain innealan-glanaidh sgrìobach.
  • Seirbheis: Na feuch ri seirbheis a thoirt don aonad thu fhèin. Thoir aire do luchd-obrach teisteanasach airson a h-uile seirbheis.
  • Clann: Keep out of reach of children. Small parts could be a choking hazard.

3. Pasgan-susbaint

Dèan cinnteach gu bheil na nithean a leanas uile air an toirt a-steach don phacaid agad:

  • THOMSON TT700 Turntable Unit
  • Platter
  • Dust Cover (Removable Transparent Cover)
  • AT91 Audio Technica Cartridge (pre-installed or separate)
  • Frith-chuideam
  • Slipmat
  • Càball claisneachd RCA
  • RCA to AUX-IN 3.5mm Adapter
  • Power Adapter (230V Mains Power Supply)
  • Leabhar-làimhe cleachdaiche (an sgrìobhainn seo)

4. Toradh thallview

Familiarize yourself with the components of your TT700 turntable:

THOMSON TT700 Turntable with dust cover open
Figear 1: THOMSON TT700 Turntable with the transparent dust cover open, revealing the platter, tonearm, and controls. This image provides a general view of the unit's layout.
Close-up of AT91 Audio Technica Cartridge
Figear 2: A mionaideach view of the yellow AT91 Audio Technica cartridge and stylus, positioned over a vinyl record. This component is crucial for reading the audio information from the record grooves.
Close-up of Tonearm, Counterweight, and Antiskating Dial
Figear 3: A close-up of the tonearm assembly, showing the adjustable counterweight at the rear and the antiskating dial near the base. These controls allow for precise adjustment of tracking force and lateral balance.
Close-up of Speed Selector and Tonearm Rest
Figear 4: A mionaideach view of the speed selector switch, marked 'ON/OFF' and '33/45', located near the tonearm rest. This switch controls the turntable's power and playback speed.

5. Stiùireadh Stèidheachaidh

5.1 Dì-phapadh agus suidheachadh

  1. Thoir air falbh na pàirtean gu lèir bhon phacaid gu faiceallach.
  2. Place the turntable on a flat, stable, and level surface.
  3. Install the transparent dust cover by aligning its hinges with the slots at the back of the turntable.

5.2 Stàladh Plàta is Crios

  1. Cuir am plèana air an spindle meadhanach.
  2. Locate the drive belt (usually pre-installed on the underside of the platter or around the motor pulley). If not pre-installed, carefully stretch the belt around the motor pulley and the inner rim of the platter.
  3. Cuir an slipmat air mullach a’ phlàta.

5.3 Cartridge and Tonearm Setup

The AT91 Audio Technica cartridge is typically pre-installed. If not, follow the cartridge manufacturer's instructions for installation.

  1. Cothromaich an gàirdean-tòna: Gently remove the stylus protector. While holding the tonearm, rotate the counterweight at the rear until the tonearm floats freely and is perfectly level.
  2. Suidhich Feachd Tracadh: Once balanced, hold the counterweight stationary and rotate the numbered ring on the counterweight to '0'. Then, rotate the entire counterweight (including the numbered ring) counter-clockwise to the recommended tracking force for the AT91 cartridge (refer to cartridge specifications, typically 2.0 grams).
  3. Set Antiskating: Adjust the antiskating dial (refer to Figure 3) to match the tracking force you set. This helps prevent the stylus from skipping inwards.

5.4 Ceanglaichean claisneachd

The TT700 features a pre-amplified output, allowing direct connection to an ampsiostam sgaoilidh no stereo.

  • Toradh RCA: Connect the supplied RCA audio cable from the 'LINE/PHONO OUT' jacks on the turntable to the corresponding 'LINE IN' or 'AUX IN' jacks on your ampluchd-labhairt no luchd-labhairt cumhachd.
  • AUX-IN 3.5mm: If your audio system only has a 3.5mm AUX-IN, use the supplied RCA to AUX-IN 3.5mm adapter.

5.5 Ceangal cumhachd

  1. Connect the power adapter to the DC input jack on the turntable.
  2. Plug the power adapter into a suitable 230V AC wall outlet.

6. Stiùireadh Obrachaidh

6.1 A’ cluich clàr

  1. Place a vinyl record on the platter, centered on the spindle.
  2. Select the correct playback speed (33 or 45 RPM) using the speed selector switch (refer to Figure 4). For 45 RPM records, you may need a 45 RPM adapter (not included).
  3. Move the tonearm lift lever to the 'UP' position to raise the tonearm.
  4. Gluais a’ ghàirdean-tòin gu socair thairis air a’ chlais tòiseachaidh a tha thu ag iarraidh air a’ chlàr.
  5. Lower the tonearm lift lever to the 'DOWN' position to slowly lower the stylus onto the record. Playback will begin.
  6. Use the 'Start/Stop' button to initiate or pause platter rotation.

6.2 Adjusting Pitch

The TT700 features a Pitch Control knob. This allows for fine adjustment of the playback speed.

  • Rotate the 'PITCH CONTROL' knob clockwise to slightly increase the playback speed or counter-clockwise to decrease it.

6.3 Stopping Playback and Automatic Return

  1. At the end of a record, the tonearm will automatically return to its rest position.
  2. To stop playback manually, move the tonearm lift lever to the 'UP' position, then gently guide the tonearm back to its rest.
  3. Switch the speed selector to 'OFF' to power down the unit.

7. Cumail suas

7.1 Glanadh an Steilus

A clean stylus ensures optimal sound quality and extends record life.

  • Use a soft stylus brush, brushing gently from back to front (in the direction of the tonearm).
  • Do not use excessive force or brush from side to side.

7.2 Glanadh a’ Chlàir-thionndaidh

  • Wipe the turntable cabinet and dust cover with a soft, dry, lint-free cloth.
  • Seachain ceimigean cruaidh no innealan-glanaidh sgrìobach a chleachdadh, oir faodaidh iad milleadh a dhèanamh air a’ chrìochnachadh.

8. A ’dèanamh trioblaid

TrioblaidAdhbhar a dh’fhaodadh a bhith annFuasgladh
Gun chumhachdPower adapter not connected; Outlet not activeDèan cinnteach gu bheil an inneal-atharrachaidh cumhachd ceangailte gu tèarainte agus air a phlugaigeadh a-steach do socaid a tha ag obair.
Gun fhuaim no fuaim ìosalAudio cables not connected; Amplifier/speakers off or volume low; Incorrect input selected on amplosgadairCheck all audio connections. Ensure amplifier/speakers are on and volume is up. Select the correct input (e.g., AUX, LINE) on your amplosgadair.
Fuaim air a mhilleadhDirty stylus; Incorrect tracking force/antiskating; Damaged recordClean the stylus. Re-adjust tracking force and antiskating. Try a different record.
Leum no leumDirty stylus; Incorrect tracking force/antiskating; Turntable not level; Damaged recordClean the stylus. Re-adjust tracking force and antiskating. Ensure the turntable is on a level surface. Try a different record.
Astar ath-chluich ceàrrWrong speed selected; Pitch control misadjustedVerify the 33/45 RPM switch is set correctly. Adjust the Pitch Control knob.

9. Sònrachaidhean

  • Ainm a' mhodail: TT700
  • Brand: THOMSON
  • Dath: Dubh
  • Seòrsa Drive: Slighe crios
  • Luas: 33 1/3 RPM, 45 RPM
  • Cartridge: AT91 Audio Technica
  • Feartan: Adjustable Counterweight, Antiskating, Pitch Control, Automatic Tonearm Return, Pre-amplasadh
  • Ceanglaichean: RCA Line/Phono Output, Auxiliary (via RCA to 3.5mm adapter)
  • Innealan co-fhreagarrach: Headphones (via connected amplifier/receiver)
  • Stuth: Vinyl (referring to the product's primary use, not construction material)
  • Cuideam nì: 4 cileagram
  • Solar cumhachd: 230V AC

10. Barantas agus Taic

For warranty information, please refer to the warranty card included with your product or visit the official THOMSON website. For technical support or service inquiries, please contact THOMSON customer service through their official channels.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.