Segotep Lux-S Mid-Tower Gaming PC Case Instruction Manual

1. Ro-ràdh

Thank you for choosing the Segotep Lux-S Mid-Tower Gaming PC Case. This manual provides essential information for the proper assembly, installation, and maintenance of your new PC case. Please read these instructions carefully before beginning the installation process to ensure optimal performance and longevity of your components.

2. Fiosrachadh Sàbhailteachd

• Dì-cheangail an solar cumhachd bhon t-socaid balla an-còmhnaidh mus cuir thu a-steach no mus toir thu air falbh co-phàirtean sam bith.
• Handle all components with care to prevent damage from static electricity. Consider using an anti-static wrist strap.
• Be cautious of sharp edges inside the case.
• Cùm pàirtean beaga agus sgriothan air falbh bho chloinn.
• Ensure proper ventilation around the assembled PC to prevent overheating.

3. Pasgan-susbaint

Dèan cinnteach gu bheil a h-uile nì an làthair sa phacaid agad:

• Segotep Lux-S Mid-Tower PC Case
• 3 x 120mm Front Fans (pre-installed)
• Bogsa Goireasan (anns a bheil sgriothan, seasamh-offs, ceanglaichean càbaill, msaa.)
• Leabhar-làimhe cleachdaiche (an sgrìobhainn seo)

4. Toradh thallview

The Segotep Lux-S is a stylish mid-tower gaming case featuring a full crystal-style design and transparent tempered glass side panels for showcasing your build. It is designed for efficient airflow and easy component installation.

Prìomh fheartan:

• Taic motherboard: Compatible with ATX, Micro-ATX, and ITX motherboards.
• Fuarachadh: Includes three pre-installed 120mm front fans. Supports additional fans and air cooling solutions.
• Sìoladh Duslach: Equipped with a magnetic anti-dust mesh on the top panel.
• Stòradh: Supports two 3.5" HDDs or one 3.5" HDD and one 2.5" SSD.
• Pannalan Taobh: Tempered glass side panels for an aesthetic view de phàirtean a-staigh.

Figear 4.1: Aghaidh view of the Segotep Lux-S PC Case, highlighting the RGB fans and tempered glass panel.

Figear 4.2: Suas gu h-àrd view of the case, illustrating the magnetic dust filter on the top panel and the front I/O ports.

Figure 4.3: Interior layout of the Segotep Lux-S, detailing the motherboard mounting area, cable routing cutouts, and drive bay locations.

5. Setup agus Stàladh

5.1 A’ toirt air falbh pannalan taobh

Carefully remove the tempered glass side panel(s) by unscrewing the thumb screws located at the rear of the case. Place the panels on a soft, flat surface to prevent scratches.

5.2 Stàladh Motherboard

1. Install the I/O shield that came with your motherboard into the rear opening of the case.
2. Align your ATX, Micro-ATX, or ITX motherboard with the pre-installed standoffs. Ensure the standoffs match your motherboard's form factor.
3. Daingnich am bòrd-màthar le bhith a’ cleachdadh nan sgriothan iomchaidh bhon bhogsa ghoireasan.

5.3 Stàladh Aonad Solarachadh Cumhachd (PSU).

Install your PSU into the dedicated compartment at the bottom rear of the case. Secure it with screws from the accessory box.

5.4 Stàladh Draibh Stòraidh

• Diosgan cruaidh 3.5": Locate the drive cage at the bottom of the case. Slide the HDDs into the trays and secure them with screws. The case supports up to two 3.5" HDDs.
• SSDan 2.5": SSDs can be mounted on designated brackets, typically behind the motherboard tray or within the HDD cage. Secure with screws. The case supports one 2.5" SSD if one 3.5" HDD is used.

5.5 Graphics Card and Expansion Cards

Remove the necessary PCIe slot covers at the rear of the case. Insert your graphics card or other expansion cards into the motherboard's PCIe slots and secure them with screws.

5.6 Stiùireadh Càbaill

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables. This improves airflow and aesthetics.

5.7 Connecting Front I/O and Fan Cables

Connect the front panel cables (USB, audio, power switch, reset switch, LED indicators) to the corresponding headers on your motherboard. Connect the pre-installed 120mm front fans to your motherboard's fan headers or a fan controller, if applicable.

6. Stiùireadh Obrachaidh

After all components are securely installed and cables are connected, replace the side panels. Connect your monitor, keyboard, mouse, and power cable. Press the power button on the front panel to start your computer.

Figear 6.1: Dùin suas view of the three 120mm RGB fans pre-installed at the front of the Segotep Lux-S case.

Fan and Lighting Control:

The pre-installed fans may have RGB lighting. Depending on your motherboard and fan connections, you may be able to control the fan speed and lighting effects through your motherboard's software or a dedicated controller (if included or purchased separately).

7. Cumail suas

• Glanadh sìoltachan duslach: The top panel features a magnetic dust filter. Regularly remove and clean it with water or a soft brush to maintain optimal airflow and prevent dust buildup inside the case.
• Glanadh coitcheann: Cleachd bog, damp cloth to clean the exterior of the case. Avoid abrasive cleaners or solvents that could damage the finish or tempered glass.
• Toirt air falbh duslach a-staigh: Periodically open the case and use compressed air to remove dust from internal components, especially heatsinks and fans.

8. A ’dèanamh trioblaid

8.1 Computer Does Not Power On

• Dèan cinnteach gu bheil an càball cumhachd ceangailte gu tèarainte ris an PSU agus ris a’ bhalla.
• Check that the PSU switch is in the 'ON' position.
• Dearbhaich gu bheil càball suidse cumhachd a’ phannal aghaidh ceangailte gu ceart ri ceann-sgrìobhaidh a’ bhòrd-mhàthar.
• Confirm all internal power cables (24-pin ATX, 8-pin CPU, PCIe power) are properly seated.

8.2 Luchd-leantainn gun a bhith a’ snìomh / RGB gun a bhith a’ lasadh suas

• Check that fan power cables are securely connected to the motherboard or fan controller.
• Ensure RGB cables (if separate) are connected to the appropriate RGB headers on the motherboard or controller.
• Consult your motherboard manual for proper fan and RGB header connections and software control.

8.3 Cùisean Cus-theasachaidh

• Ensure all case fans are operating correctly and oriented for optimal airflow (intake/exhaust).
• Glan sìoltachain duslach agus pàirtean a-staigh gu cunbhalach.
• Verify that CPU cooler and GPU fans are functioning properly.

9. Sònrachaidhean

10. Barantas agus Taic

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Segotep weblàrach. Cùm dearbhadh ceannach airson tagraidhean barantais.

If you encounter any issues not covered in this manual, please contact Segotep customer support for assistance.