Deasc LED Baseus Lamp Leabhar-làimhe stiùiridh

Bathar seachadview

The Baseus LED Desk Lamp is a versatile, cordless lighting solution designed for various environments such as home offices, kitchens, bedrooms, and study areas. It features touch controls for brightness adjustment, magnetic mounting for easy installation, and a convenient 30-second turn-off delay.

Figure 1: Baseus LED Desk Lamp and its magnetic base.

Na tha air a ghabhail a-steach

Nuair a dh’fhosglas tu am bogsa, dèan cinnteach gu bheil na pàirtean a leanas uile an làthair:

• Magnetic desk lamp (x1)
• 1M USB Type-C cable (x1)
• Magnetic strip base (x1)
• Leabhar-làimhe cleachdaiche (x1)

Stàladh agus stàladh

The Baseus LED Desk Lamp offers flexible installation options due to its magnetic design.

1. Ceangal magnetach: An lamp features a built-in magnet, allowing it to be directly adsorbed onto any ironwork surface.
2. Stàladh adhesive: For non-iron surfaces, use the included 3M adhesive strip on the magnetic base. Ensure the surface is clean and flat before attaching the base. Once the base is secured, the lamp can be magnetically attached to it.

Figure 2: The magnetic base allows for easy attachment to various surfaces.

Video 2: Demonstration of magnetic installation.

Stiùireadh Obrachaidh

An lamp is controlled via sensitive touch buttons located on its surface.

• Cumhachd air / dheth: Press the power button (⑁) to turn the lamp air neo dheth.
• Atharrachadh soilleireachd:
  • Single click the brightness adjustment buttons (⌃ / ⌄) for three preset brightness levels.
  • Long press the brightness adjustment buttons (⌃ / ⌄) for stepless dimming, allowing you to fine-tune the brightness from 10% to 100%. The lamp remembers your last brightness setting.
• 30-Second Turn-off Delay: Single click the timer button (⏱) to activate a 30-second delay before the light turns off. This feature provides a buffer, allowing your eyes to adjust to darkness and preventing you from fumbling in the dark.
• Atharrachadh ceàrn: An lamp body can be rotated 80 degrees to direct light precisely where needed, reducing glare and reflection.

Figure 3: Touch control interface for power, brightness, and delay.

Video 3: Demonstration of brightness adjustment.

Figure 4: The 30-second turn-off delay feature.

Video 4: Demonstration of 30-second turn-off delay.

Bataraidh agus cosgais

An lamp is equipped with a built-in 1800mAh USB rechargeable battery.

• A' cur cosgais: Use the provided USB Type-C cable to charge the lamp. A full charge typically takes 4-5 hours.
• Beatha bataraidh: The wireless rechargeable bar light can be used for 4-24 hours on a single charge, depending on the brightness level set.

Figure 5: Battery life estimates based on brightness levels.

Video 5: Charging the Baseus LED Desk Lamp.

Tagraidhean air am moladh

Tha an lamp is suitable for a wide range of uses:

• Under cabinet lighting in kitchens
• Closet lighting
• Deasg lamp for reading or study
• Solas èiginn
• Fill light for mirrors or makeup areas
• Stairs and hallway lighting

Figear 6: Examples of the lamp's use in different settings.

Video 6: Various usage scenarios for the lamp.

Sònrachaidhean Bathar

Fuasgladh thrioblaidean

If you encounter any issues with your Baseus LED Desk Lamp, thoir sùil air na fuasglaidhean cumanta a leanas:

• Solas gun a bhith a 'tionndadh air: Dèan cinnteach gu bheil an lamp is charged. Connect it to a power source using the USB-C cable and allow it to charge for a few minutes before attempting to turn it on again.
• Brightness not adjusting: Check if you are using the correct touch gestures. A single tap cycles through preset levels, while a long press enables stepless dimming.
• Magnetic base not holding: Ensure the surface where the magnetic base is attached is clean, dry, and smooth. If using the adhesive, ensure it has fully cured (typically 24 hours) before applying significant weight or force.
• Beatha bataraidh goirid: Battery life varies significantly with brightness settings. Using the lamp at higher brightness levels will deplete the battery faster. Ensure the lamp is fully charged before extended use.

For persistent issues not covered here, please contact Baseus customer support.

Barantas agus Taic

Baseus is committed to customer satisfaction. We provide lifetime technical support and service for your product. For any inquiries or assistance, please contact our 24-hour friendly customer service team.

Please note: It is recommended to fully charge the lamp before its first use to optimize battery performance.